1、Before attempting to connect this product,please read this
2、Ensure the supply voltage is correct as specified for the
particular variant of the camera before operation.
3、Never face the camera toward the sun directly.
4、Do not attempt to service this unit yourself unless you are
authorized to do so.Opening or removing cover may expose
you to dangerous or other hazardous materials .Refer all servicing to
qualified personnel only.
5、Keep a suitable clearance between the unit
and the place where the unit mounted.
6、Do not dissamble the camera.
7、Strongly suggest the current of power source
adapter
(24V AC) using 1.5 ampere or above.
3. SYSTEM COMPONENTS:
Camera ……………...……………….…..…1
Instruction manual……...……………….….…1
Bracket……….………….………….….……1
coaxial--cable BNC & POWER connector----1
Hexagonal wrench………..………………….1
P.2 P.7
6. SPECIFICATION: 8. ADJUSTMENT: (Through OSD menu)
Total Pixels PAL: 1024 * 596 / NTSC: 1028 * 508
Effective Pixels PAL: 976 * 582 / NTSC: 976 * 494
Sync System Internal Sync
Video Output 1Vpp Composite, 75 ohm BNC Connector
Lens Lens Varifocal 5 ~ 60mm Auto IRIS, F1.6
More than 700 TV Lines ( Horizontal )
Minimum Illumination 0 Lux (IR LEDs Activated)
S/N Ratio More than 68dB (AGC Off)
Power Consumption 2W (IR LEDs Activated : 13W Max)
Ambient -10 ～50℃(14~122F) /30 ～90 ﹪RH
Dimensions 127mm(H) x156 mm(W)×354mm(D)
Backlight Compensation Setting through OSD menu
White Balance Setting through OSD menu
Gain Control Setting through OSD menu
Image Correction Image Reverse/Brightness/Contast/Sharpness/HUE/AGC
14 Pieces of Big LEDs , ※New 14 LEDs (10Φ Big LED)
+ 21 LEDs(5ΦLED)
7. INSTALLATION INSTRUCTIONS:
1、Connect the video output of the camera to a color
monitor or other video device through a 75 Ωtype
coaxial cable with BNC connector at cable extension.
2、Connect the regulated power source to the
24V AC power Non-polarity
P.4 P.5
INSULATORS……………….……………..…….1 (Pack)
