Technical
Project
High Performance 4 Core Processor + Secure CPU
1GB RAM, 8GB Flash memory, Support Micro TF Card, up to 32GB
Android 5.X
5”, 720x1280 pixels, support capacitate touch screen
Track 1/2/3, bi-directioanl, compliant with ISO7811,7812
1 user card (EMV4.3), Support Memory Card, CPU Card, EMV4.3,
PBOC3.0, ISO7816 Standard.
13.56MHz. Support Mifare Card, Compliant with ISO/IEC14443 Type A&B
1 PSAM slot
1 TF Card slot
Support PIN Entry from touch screen
RS-232, Ethernet 10/100M, MDB
Ethernet (8P8C), RS232 (6P6C, with power output 12V/0.5A)
Micro fit 43045, power input socket, MDB (24~45 VDC)
USB Host, USB Device
1 key for reset, 1 key for volume+
1 Built-in speaker
Infrared sensor, the distance of reaction is about 20CM~50CM
12V DC, 2A (when using Micro fit), 24 ~ 45V DC (when using MDB)
Input 100~240 VAC, 50 ~ 60 Hz; output 12V DC 2A
ANSI/UL 94 V-0
IP65
IK08
Temperature: -20℃ ~ 45℃(-4℉~ 113℉)
Humidity: 10% ~ 90% (non-condense)
Temperature: -25℃ ~ 75℃(-13℉~167℉)
Humidity: 0% ~ 95% (non-condense)
195*122*94mm
Undetermined
PCI PTS 5.X, EMV LEVEL 1&2, EMV Contactless, CE, FCC, Pay Pass
Processor
Memory
System
Display
Magnetic Card Reader
IC Card Reader
Contactless Card Reader
PSAM
TF Card
Internal PED
Communications
Interfaces
Button
Audio
Proximity detector
Power Supply
Power adapter
Flammability rating
Dust/waterproof rating
Protection classification
Working
Environment
Storage
Environment
Size
Weight
Certification
www.newpostech.com
NEW5310
Technical Specifications
NEW POS Technology limitedNEW POS Technology limited
NEW POS TECHNOLOGY LIMITED
Address: 14/A, Financial Technology Building, Financial & Technology
Building, No.11, Keyuan Rd, Nanshan District, ShenZhen, China
Tel: +86-755-86938425 Fax: +86-755-82790632
E-mail: Sales@newpostech.com Postalcode: 518057
WebSite: www.newpostech.com
Notice: This device may be used in each member state in EU
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
RF exposure information: The EIRP power of the device at maximal case is below
RF exposure assessment has been performed to prove that this unit will not generate
the exemt condition, 20mW specified in EN62479: 2010.
the harmful EM emission above the reference level as specified in EC Council
Recommendation(1999/519/EC).
Hereby, NEW POS TECHNOLOGY LIMITED declares that the radio equipment
type (Unattended Terminal, NEW5310) is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address:www.newpostech.com
The grantee is not responsible for any changes or modifications not expressly
approved by the party responsible for compliance. Such modifications could void
the user’s authority to operate the equipment.
only NFC 13.56MHz in this sample
