Network Technologies Incorporated ST-FO4K18GB-RS-LC Manual de usuario

VER 1.4

ST-FO4K18GB-RS-LC

HDMI over Optical Fiber Extender

1/ 7

Thank you for purchasing this product

For optimum performance and safety, please read these instructions

carefully before connecting, operating or adjusting this product. Please

keep this manual for future reference.

Surge protection device recommended

This product contains sensitive electrical components that may be damaged

by electrical spikes, surges, electric shock, lightning strikes, etc. Use

of surge protection systems is highly recommended in order to protect and

extend the life of your equipment.

Table of Contents

1. Introduction..................................................................................... 2

2. Features............................................................................................. 2

3. Package Contents.......................................................................... 2

4. Specifications................................................................................... 3

5. Operation Controls and Functions......................................... 4

6. Connection Diagram.....................................................................6

1. Introduction

The HDMI over Optical Fiber Extender can extend HDMI signal up to 4K Ultra

2/ 7

HD over 3280 feet (1000 meters) for Single-mode or 984 feet (300 meters)

for Multi-mode cable to an HDMI compatible display. It also supports

bi-directional infrared control and RS-232 signals transmission. It can

allow you to easily control your DVD player at TV side or control your

TV at the DVD player side when using this extender.

2. Features

HDMI 2.0b (18Gbps), HDCP 2.2 and DVI compliant

Video resolutions up to 4K2K@50/60Hz (YUV444)

Audio supports LPCM2/5.1/7.1 CH, Dolby Digital, DTS, Dolby True HD,

DTS-HD Master Audio

Long distance transmission up to 3280 feet/1000 meters over

single-mode fiber cable and up to 984 feet/300 meters over multi-mode

fiber cable (50/125µm/OM3)

Bi-directional wideband infrared control and RS-232 transmission

Locking power supply

3. Package Contents

1 x HDMI over Optical Fiber Transmitter

1 x HDMI over Optical Fiber Receiver

1 x Fiber Transmitter Module

1 x Fiber Receiver Module

2 x Wideband IR Blaster cable

2 x Wideband IR Receiver cable

2 x 5V/1A Power Adaptor

2 x screw terminal block

1 x User Manual

4. Specifications

Technical

HDMI Compliance

HDMI 2.0b

HDCP Compliance

HDCP 2.2 and HDCP 1.4

Video Bandwidth

18 Gbps

Video Resolutions

Up to 4K2K@50/60Hz(YUV4:4:4),4K2K@30Hz,1080P@120Hz,

and 1080P 3D@60Hz

3/ 7

Color Space

RGB, YCbCr 4:4:4, YCbCr 4:2:2

Color Depth

8-bit, 10-bit, 12-bit

HDMI Audio Formats

LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby

TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X

Operation Range

Up to 3280 feet/1000 meters over single-mode fiber cable

Up to 984 feet/300 meters over multi-mode fiber cable

IR Frequency

20KHz - 60KHz

RS-232 Baud Rate

4800-115200bps

ESD Protection

Human body model — ±8kV (air-gap discharge) & ±4kV (contact

discharge)

Connections

Transmitter

Inputs: 1x HDMI Type A [19-pin female]

1x IR In [3.5mm Stereo Mini-jack]

1x RS-232 [3.81mm screw terminal block]

Outputs: 1x Optical Fiber Out [LC female]

1x IR Out [3.5mm Stereo Mini-jack]

Receiver

Inputs: 1x Optical Fiber In [LC female]

1x IR In [3.5mm Stereo Mini-jack]

Outputs: 1x HDMI Type A [19-pin female]

1x IR Out [3.5mm Stereo Mini-jack]

1x RS-232 [3.81mm screw terminal block]

Mechanical

Housing

Metal Enclosure

Color

Black

Dimensions

157mm [W] x 65mm [D] x 17.8mm [H]

Weight

TX: 0.615 lb (279g) RX: 0.617 lb (280g)

Power Supply

Input: AC100 - 240V 50/60Hz, 0.5A

Output: DC 5V/1A (US/EU standards, CE/FCC/UL certified)

Power Consumption

3W (Max)

Operation

Temperature

32 - 104°F / 0 - 40°C

Storage temperature

-4 - 140°F / -20 - 60°C

Relative Humidity

20 - 90% RH (no condensation)

Interface cables between the video source/display and the transmitter/receiver are required for proper operation.

o Supports cable lengths to 20 feet.

o Cables longer than 20 feet can be used provided they have a built-in video equalizer (also

known as "active HDMI cables").

4/ 7

5. Operation Controls and Functions

5.1 Transmitter Panel

Power LED: System power indicator.

Optical LED: Optical link indicator, illuminates when transmitter

and receiver establish optical link.

HDMI LED: HDMI input signal indicator, illuminates when HDMI input

has an active signal.

DC 5V: Connect 5V/1A adaptor for power supply.

Optical: Connect to receiver with a single or multi-mode fiber

cable.

HDMI In: Connect to an HDMI source device.

IR In: Connect to an IR receiver cable and put IR receiver header

close to display device’s IR receiver window.

IR Out: Connect to an IR emitter cable and put IR emitter header

close to source device’s IR receiver window.

RS-232: RS-232 commands will pass through this extender.

Update: Firmware updating port.

5/ 7

5.2 Receiver Panel

Power LED: System power indicator.

Optical LED: Optical link indicator, illuminates when transmitter

and receiver establish optical link.

HDMI LED: HDMI output connecting indicator, illuminates when HDMI

output has an active TV be connecting.

DC 5V: Connect 5V/1A adaptor for power supply.

Optical: Connect to transmitter with a single or multi-mode fiber

cable.

HDMI Out: Connect to an HDMI display device.

IR In: Connect to an IR receiver cable and put IR receiver header

close to display device’s IR receiver window.

IR Out: Connect to an IR emitter cable and put IR emitter header

close to source device’s IR receiver window.

RS-232: RS-232 commands will pass through this extender.

Update: Firmware updating port.

5.3 IR Cable Pin Assignments

6/ 7

5.4 Optical module instruction

① SFP-BL35T1-02DC is TX optical module.

② SFP-BL531T-02DC is RX optical module.

6. Connection Diagram