Installation Precautions
Read the notes below before installing
The power adapter must be a standard adapter
that is supplied with Netween adapter products.
Must seek professional help when product is damaged, please
avoid further deteriorating or opening the case of the product.
Be careful not to drop or apply strong collision to the product.
Please avoid setting in places with direct sunlight, dust,
excessive vibration or unstable places before and after you
install the product.
If the exterior adapter devices of the Netween are cleaned with
alcohol, benzene, acetone, etc. or any flammable liquids, this
alteration to the surface will cause chemical changes. In case of
contact with other material please wipe the area with a dry cloth.
The power being supplied must be stable. In the case of the
power supply develops sparks or noises, a power control device
must be installed.
Never touch the power supply area when the power cord is
connected due to risks of electric shocks. When installing or
moving the product, power switch must be turned off and all the
connected cables must be unplugged.
Pay attention not to overload wiring connections when connected
the power source.
The information contained in this manuscript can be changed without
agreement or separate notice of individual users.
regulations, some environmental constrains of the product
performance and feature limitations may be encountered.
We will not take responsibility of any line disability issues during
usage of this product.
4
