Netvox Z308 Manual de usuario

ZigBeeTM- Wireless Wearable Presence Tag with Emergency Button

Wireless Wearable Presence Tag

with Emergency Button

Z308

User Manual

Table of Contents

1.Introduction.........................................................................................................................................2

2.Appearance .........................................................................................................................................3

3. Features..............................................................................................................................................3

4.Installation ..........................................................................................................................................4

5.Setting up Z308...................................................................................................................................5

5-1. Power On.................................................................................................................................5

5-2. Turn On/ Turn Off Z308..........................................................................................................5

5-3. Join the ZigBee Network.........................................................................................................5

5-4. Enroll in the ZigBee Security System.....................................................................................6

5-5. Sleeping Mode.........................................................................................................................6

5-6. Wake Up Z308.........................................................................................................................7

5-7. Panic Button............................................................................................................................7

5-8. Presence Tag............................................................................................................................9

5-9. HeartBeat Technique ...............................................................................................................9

5-10. Battery ...................................................................................................................................9

5-11. Restore to Factory Setting ...................................................................................................10

5-12. Offline Activation................................................................................................................10

6. Home Automation Clusters for Z308 ..............................................................................................11

7. Related Netvox Devices ..................................................................................................................14

8. Important Maintenance Instructions................................................................................................14

9. FCC Statement.................................................................................................................................15

10. CE Certification Statement............................................................................................................16

1.Introduction

Z308, a wearable presence tag, acts as an IAS device for minor children/aged-care use. It is an ideal

product to detect one’s presence within/ out of the network coverage for safety purpose. Z308 periodically

sends presence/absence report to keep a close watch on those who wear it. Z308 also works as an

emergency button. When users ask for urgent assistance, simply push the button, and Z308 will send the

alarm message to the command center. The Warning Device will send out alarm sound or lighting alert for

immediate help.

ZigBee Wireless Technology

ZigBee is a short range wireless transmission technology based on IEEE802.15.4 standard and supports

multiple network topologies such as point-to-point, point-to-multipoint, and mesh networks. It is defined

for a general-purpose, cost-effective, low-power-consumption, low-data-rate, and easy-to-install wireless

solution for industrial control, embedded sensing, medical data collection, smoke and intruder warning,

building automation and home automation, etc.

2.Appearance

3. Features

Fully IEEE 802.15.4 compliant

Utilizes 2.4GHz ISM band; up to 16 channels

IP Rating: IP52

Power supply: 1 x CR2450 3.0V battery

Communication transmission is up to 210 meters linear distance in open field

Easy installation and configuration

(Red / Green)

Indicator

Panic Button

4.Installation

5.Setting up Z308

5-1. Power On

Without external power supply, the product uses internal 3V button battery for power supply.

Step1. Open the battery back cover

Step2. Take a CR2450 button battery, put the negative pole upward into the battery base

Step3. Cover the back cover and lock the screws

Step4. Long press the alarm key for 3 seconds, and the LED lights flash once respectively,

indicating that the power on is successful

5-2. Turn On/ Turn Off Z308

To manually turn on or turn off Z308, please use the following instructions:

Turn it on: Press and hold the Panic Button for 3 seconds. The indicators will flash once, and the

device is ready to be used.

Turn it off: Press and hold the Panic Button for 6 seconds. The indicator will flash red 10 times

within 5 seconds. Within the 5-second period of time, press the Panic Button again to

turn it off.

5-3. Join the ZigBee Network

After Z308 is turned on, it will search for an existing ZigBee network and send a request to join the

network automatically. While Z308 is under the coverage from a coordinator or a router whose

permit-join feature is enabled, Z308 will be permitted to join the network.

Step1. Enable the permit-join function (valid for 60 seconds) of a coordinator or a router (please

refer to the user manual of the coordinator or the router to enable the permit-join feature).

Step2. Turn on Z308. It will start to search and join the network.

Step3. Press and hold button for three seconds to search a network to join.

Step4. The indicator will flash green 5 times after it is joined successfully. Otherwise, the

indicator will not flash.

Step5. When Z308 can not join a network in 3 minutes, it will go into off mode. To ask for

joining Network again, press and hole button for 3 seconds.

After joining a network, Z308 would try to enroll in the ZigBee security system. Please make

sure Z308 and CIE (Control and Indicating Equipment) device have enough power.

5-4. Enroll in the ZigBee Security System

Z308 is a Zone device in the ZigBee security system. Right after Z308 join the ZigBee network, it

will automatically find out a CIE (Control and Indicating Equipment) device and send a registration

request to the CIE device to enroll in the security system. The enrollment has these 3 situations:

A. There is no CIE device or no compatible CIE device in the network

→ the indicator flashes red twice.

B. There is a compatible CIE device in the network, but it is failed to enroll

→ the indicator flashes red 4 times. Users can reboot Z308 to initiate the registration.

C. The enrollment is completed

→ the indicator flashes red 6 times.

Note:

Users had better NOT enroll multiple Zone devices at the same time to prevent registration failure.

5-5. Sleeping Mode

Z308 is designed to go into sleeping mode for power-saving in some situations:

A. While the device is in the network →the sleeping period is 5 minutes; it will wake up every

5 minutes to keep online.

B. Once Z308 was joined to a network and by any chance the network is no longer existed or the

device is out of the network →Z308 will wake up every 5 minutes to find the network it

joined before.

It never keeps in sleeping mode and continues to find out a network every 5 minutes. This condition

would consume up to 30 times power spending compared to normal-operating status. To prevent this

unwanted power consumption, we recommend that users turn off the device.

5-6. Wake Up Z308

When users would like to setup or acquire data from the device which is in sleeping mode, we have to

wake up the device as the following steps:

Step1. Press and hold the Panic Button for 3 seconds. Release the button when the indicator flashes

red once.

Step2. The indicator flashes green 5 times when Z308 is online.

Step3. Z308 will broadcast the device data to the ZigBee network.

Z308 would be in active status for 2 minutes for communication.

5-7. Panic Button

Z308’s Zone Type: Key Fob (ID: 0x0115)

The value of Alarm2 is 1 when sending alarm message.

Under the circumstances that Z308 has enrolled to the security system, it will send the alarm message

to the command center (and the bound devices with ID: 0x0500) after pressing the Panic Button. The

Warning Device will send out alarm sound or lighting alert for immediate help.

Under the circumstances that Z308 hasn’t enrolled to the security system, it will try enroll in a

security system after pressing the Panic Button. After the enrollment, Z308 will send the alarm

message to the command center.

ZoneStatusChange commands: 0x00.

The command list:

Bits: 8 8 8 var

Frame

control

Transaction

Sequence

number

Command

identifier

Frame payload

16-Bit Enumeration 8-Bit Enumeration

0x09 0x00 ZoneStatus ExtendedStatus

(ClusterID: 0x 0500)

Values of the ZoneStauts payload

ZoneStatus

Attribute Bit Number Meaning Values

0 Alarm1 1 – opened or alarmed

0 – closed or not alarmed

1 Alarm2 1 – opened or alarmed

0 – closed or not alarmed

2 Tamper 1 – Tampered

0 – Not tampered

3 Battery 1 – Low battery

0 – Battery OK

4 Supervision reports 1 – Reports

0 – Does not report

5 Restore reports 1 – Reports restore

0 – Does not report restore

6 Trouble 1 – Trouble/Failure

0 – OK

7 AC (mains) 1 – AC/Mains fault

0 – AC/Mains OK

8-15 Reserved

Values of the ExtendedStatus payload

ExtendedStatus

Attribute Bit Number Meaning Values

0-6 ZoneID

7 ZoneStatusChange Or

Heartbeat

1 – HeartBeat

0 – ZoneStatusChange

5-8. Presence Tag

Z308 works as a presence tag. It is an ideal product to detect one’s presence within/ out of the

network coverage for safety purpose. Z308 periodically sends presence/absence report to keep a close

watch on those who wear it. The bound devices (with ID: 0xFE60) could calculate Z308’s location

based on the RSSI values between Router Devices and Z308.

The command list:

Bits:8 16 8 8 var

Frame

control

Manufacturer

code

Transaction

Sequence

number

Command

identifier

Frame payload

Count Node

ID RSSI …

Node

ID RSSI

0x05 0x109F 0x5F Byte 2byte Signed

(Clusterid：0x FE60)

5-9. HeartBeat Technique

In a security system, it is important that Zone devices report the conditions to the central security unit

(the CIE device). To meet this need, Netvox came up with a technique called “HeartBeat”.

Right after Z308 enrolls to a security system, it sends a HeartBeat signal to the CIE device. Afterward,

it will send HeartBeat data every hour by default settings.

5-10. Battery

When the operating voltage is lower than 2.1V, the indicator will flash red once. Z308 will send a

low-power report to the ZigBee network.

The related data:

Power configuration cluster (ID: 0x0001)

Battery voltage attribute (ID: 0x0020)

Battery alarm state attribute (ID: 0x003E)

Otros manuales para Z308

Tabla de contenidos

Otros manuales de Sistema de seguridad de netvox

netvox

netvox R312A Manual de usuario

netvox

netvox R602B Manual de usuario

netvox

netvox Z602B Manual de usuario

netvox

netvox LoRa R602A Manual de usuario

netvox

netvox LoRa R602A Manual de usuario

netvox

netvox Z309 Manual de usuario

netvox

netvox RA02G Manual de usuario

netvox

netvox RA03A Manual de usuario

netvox

netvox ZigBee Z602A Manual de usuario

netvox

netvox R309 Series Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario

netvox Z308 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas