Netvox R313FA Manual de usuario

Model：R313FA

Wireless Activity Detection Sensor

User Manual

This document contains proprietary technical information which is the property of NETVOX

Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole

or in part, without written permission of NETVOX Technology. The specifications are subject to change

without prior notice.

Table of Content

1. Introduction ..................................................................................................... 2

2. Appearance ...................................................................................................... 3

3. Main Features.................................................................................................. 3

4. Set up Instruction............................................................................................. 4

5. Data Report...................................................................................................... 5

6. Installation..................................................................................................... 10

7. Relative Devices.............................................................................................11

8. Important Maintenance Instruction................................................................11

1. Introduction

The R313FA is a vibration alarm device for Netvox ClassAtype devices based on the LoRaWAN open

protocol. When the device detects movement or vibration, it immediately triggers an alarm, compatible

with LoRaWAN protocol.

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power consumption.

Compared with other communication methods, LoRa spread spectrum modulation method greatly

increases to expand the communication distance. Widely used in long-distance, low-data wireless

communications. For example, automatic meter reading, building automation equipment, wireless

security systems, industrial monitoring. Main features include small size, low power consumption,

transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability

between devices and gateways from different manufacturers.

2. Appearance

3. Main Features

Apply SX1276 wireless communication module

2 section 3V CR2450 button battery powered

Vibration status and battery voltage detection

Compatible with LoRaWANTM Class A

Frequency hopping spread spectrum technology

Configuration parameters can be configured through third-party software platforms, data can be read

and alarms can be set via SMS text and email (optional)

Available third-party platform: Actility / ThingPark, TTN, MyDevices/Cayenne

Improved power management for longer battery life

Battery Life:

⁻Please refer to web: http://www.netvox.com.tw/electric/electric_calc.html

⁻At this website, users can find battery life time for variety models at different configurations.

1. Actual range may vary depending on environment.

2. Battery life is determined by sensor reporting frequency and other variables.

Indicator

Function Key

4. Set up Instruction

On/Off

Power on Insert two sections of 3V CR2450 button batteries and close the battery

cover

Turn on Press any function key and the green and red indicator flash once.

Turn off (Restore to factory setting) Press and hold the function key for 5 seconds till the green indicator

flashes for 20 times.

Power off Remove Batteries.

Note:

1. Remove and insert the battery; the device memorizes previous on/off

state by default.

2. On/off interval is suggested to be about 10 seconds to avoid the

interference of capacitor inductance and other energy storage

components.

3. Press any function key and insert batteries at the same time; it will

enter

engineer testing mode.

Network Joining

Never joined the network

Turn on the device to search the network to join.

The green indicator stays on for 5 seconds: success

The green indicator remains off: fail

Had joined the network

Turn on the device to search the previous network to join.

The green indicator stays on for 5 seconds: success

The green indicator remains off: fail

Fail to join the network

(when the device is on)

Suggest to check the device verification information on the gateway or

consult your platform server provider.

Function Key

Press and hold for 5 seconds

Restore to factory setting / Turn off

The green indicator flashes for 20 times: success

The green indicator remains off: fail

Press once

The device is in the network: the green indicator flashes once and sends a

report

The device is not in the network: the green indicator remains off

Sleeping Mode

The device is on and in the network

Sleeping period: Min Interval.

When the reportchange exceeds setting value or the state changes: send a

data report according to Min Interval.

Low Voltage Warning

Low Voltage 2.4V

5. Data Report

The device will immediately send a version packet report along with an uplink packet including vibration

status and battery voltage.

The device sends data in the default configuration before any configuration is done.

Default setting:

MaxTime: Max Interval = 60 min = 3600s

MinTime: Min Interval = 60 min = 3600s

BatteryChange: 0x01 (0.1V)

ActiveThreshold: 0x0003 (Threshold range: 0x0003-0x00FF, 0x03 is the most sensitive)

Deactivetime: 0x05 (Deactive time Range: 0x01-0xFF)

ActiveThreshold:

Active Threshold = Critical value ÷ 9.8 ÷ 0.0625

*The gravitational acceleration at standard atmospheric pressure is 9.8 m/s2

*The scale factor of the threshold is 62.5 mg

R313FA vibration alarm:

The device detects a sudden movement or vibration, change of the quiescent state, and it will

immediately send a report. After the vibration alarm, the device waits for DeactiveTime to enter the

quiescent state before starting the next detection. If the vibration continues to occur during this process,

the timing restarts until it enters the quiescent state.

R313FX Series DeviceType:

R313FA 0x01; R313FB 0x02; R313FC 0x03

Note:

The device report interval will be programmed based on the default firmware which may vary.

The interval between two reports must be the minimum time.

Please refer Netvox LoRaWAN Application Command document and Netvox Lora Command Resolver

http://www.netvox.com.cn:8888/page/index to resolve uplink data.

Data report configuration and sending period are as following:

Example of data configuration:

FPort：0x07

Bytes 1 1 Var(Fix =9 Bytes)

CmdID DeviceType NetvoxPayLoadData

CmdID– 1 byte

DeviceType– 1 byte – Device Type of Device

NetvoxPayLoadData– var bytes (Max=9bytes)

(1) Configure device parameters MinTime = 1min, MaxTime = 1min, BatteryChange = 0.1v

Downlink: 014F003C003C0100000000

The device returns:

814F000000000000000000 (configuration succeeded)

814F010000000000000000 (configuration failed)

Min Interval

(Unit: second)

Max Interval

(Unit: second) Reportable Change Current Change≥

Reportable Change

Current Change＜

Reportable Change

Any number between

1~65535

Any number between

1~65535 Can not be 0. Report

per Min Interval

Report

per Max Interval

Description Device

Cmd

DeviceT

ype

NetvoxPayLoadData

Config

ReportReq

R313FA

0x01

0x4F

MinTime

(2bytes Unit:s) MaxTime

(2bytes Unit:s)

BatteryChange

(1byte

Unit:0.1v)

Reserved

(4Bytes,Fixed

0x00)

Config

ReportRsp

0x81

Status

(0x00_success)

Reserved

(8Bytes,Fixed 0x00)

ReadConfig

ReportReq

0x02

Reserved

(9Bytes,Fixed 0x00)

ReadConfig

ReportRsp 0x82 MinTime

(2bytes Unit:s) MaxTime

(2bytes Unit:s)

BatteryChange

(1byte

Unit:0.1v)

Reserved

(4Bytes,Fixed

0x00)

(2) Read device configuration parameters

Downlink: 024F000000000000000000

The device returns:

824F003C003C0100000000 (current device configuration parameters)

(3) Change the device type to R313FB (0x02)

Downlink: 034F020000000000000000

The device returns:

834F000000000000000000 (configuration succeeded)

834F010000000000000000 (configuration failed)

(4) Check the current device type

Downlink: 044F000000000000000000

The device returns:

844F020000000000000000 (current device type R313FB)

Description Device

Cmd

DeviceT

ype

NetvoxPayLoadData

SetR313F

TypeReq

R313FA

0x03

0x4F

R313FType

(1Bytes,0x01_R313FA,0x02_R31

3FB,0x03_R313FC)

Reserved

(8Bytes,Fixed 0x00)

SetR313F

TypeRsp

0x83

Status

(0x00_success)

Reserved

(8Bytes,Fixed 0x00)

GetR313F

TypeReq 0x04

Reserved

(9Bytes,Fixed 0x00)

GetR313F

TypeRsp 0x84 R313FType

(1Bytes,0x01_R313FA,0x02_R31

3FB,0x03_R313FC)

Reserved

(8Bytes,Fixed 0x00)

SetActive

ThresholdReq 0x05

Threshold

(2Bytes)

Deactivetime

(1Byte,Unit:1s)

Reserved

(6Bytes,Fixed 0x00)

SetActive

ThresholdRsp 0x85 Status

(0x00_success) Reserved

(8Bytes,Fixed 0x00)

GetActive

ThresholdReq 0x06 Reserved

(9Bytes,Fixed 0x00)

GetActive

ThresholdRsp 0x86 Threshold

(2Bytes) Deactivetime

(1Byte,Unit:1s) Reserved

(6Bytes,Fixed 0x00)

Example for MinTime/MaxTime logic:

Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e.

BatteryVoltageChange=0.1V

MaxTime MaxTime

Sleeping(MinTime) Sleeping(MinTime)

Note:

MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration

regardless BtteryVoltageChange value.

Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e.

BatteryVoltageChange= 0.1V.

MaxTime

Sleeping(MinTime) sleeping sleeping sleeping

0H 15th M 30th M 45th M 1H 2H

Wakes up and

collects data

2.8V

Does not report

Wakes up and

collects data

2.8V

Does not report

Wakes up and

collects data

REPORT 2.8V

Wake up and collects data

REPORTS 2.8V

Wakes up and collects data

REPORTS 2.8V

Wakes up and collects data

REPORTS 2.8V

Wakes up and

collects data

2.8V

Does not report

Wakes up and

collects data

REPORT 2.8V

Example#3 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e.

BatteryVoltageChange= 0.1V.

MaxTime

sleeping sleeping

0H 15th M 30th M 45th M 1H 1H 10th M 1H 25thM

Notes:

(1) The device only wakes up and performs data sampling according to MinTime Interval. When it is

sleeping, it does not collect data.

(2) The data collected is compared with the last data reported. If the data change value is greater than

the ReportableChange value, the device reports according to MinTime interval.

If the data variation is not greater than the last data reported, the device reports according to

MaxTime interval.

(3) We do not recommend to set the MinTime Interval value too low. If the MinTime Interval is too

low, the device wakes up frequently and the battery will be drained soon.

(4) Whenever the device sends a report, no matter resulting from data variation, button pushed or

MaxTime interval, another cycle of MinTime/MaxTime calculation is started.

Wakes up and collects

data

2.7V |2.7-2.8|=0.1

REPORTS 2.7V Wakes up and

collects data 2.7V

Does not report

Users push the button,

REPORTS 2.7V.

Recalculate MaxTime.

Wakes up and

collects data

2.8V

Does not report

Wakes up and

collects data

REPORT 2.8V

Wakes up and

collects data

2.7V

Does not report

Wakes up and

collects data

2.7V

Does not report

Wakes up and

collects data

2.7V

Does not report

Tabla de contenidos

Otros manuales de Sensor de seguridad de netvox

netvox

netvox S31502 Manual de usuario

netvox

netvox RA02C Manual de usuario

netvox

netvox R313LA Manual de usuario

netvox

netvox R718WB Manual de usuario

netvox

netvox S31501 Manual de usuario

netvox

netvox R718WB2 Manual de usuario

netvox

netvox R311W Manual de usuario

netvox

netvox ZB11D Manual de usuario

netvox

netvox Z801TXB Manual de usuario

netvox

netvox R718PA9 Manual de usuario

netvox

netvox R313WA Manual de usuario

netvox

netvox R313FC Manual de usuario

netvox

netvox RA08D Series Manual de usuario

netvox

netvox R718B Manual de usuario

netvox

netvox R718WBA Manual de usuario

netvox

netvox R311A Manual de usuario

netvox

netvox R313W Manual de usuario

netvox

netvox RA08B Series Manual de usuario

netvox

netvox RA08B Series Manual de usuario

netvox

netvox R313CC Manual de usuario

netvox

netvox R313CB Manual de usuario

netvox

netvox R718WA Manual de usuario

netvox

netvox R718WB Manual de usuario

netvox

netvox R718WB2 Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

Bosch

Bosch DS835 Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Satel

Satel OPAL Pro Manual de usuario

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario

netvox R313FA Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas