Netvox R207 Manual de usuario

R207

Smart IOT Controller

Smart Home Controller

Manual

For IPK Version 0.0.0.59 and above

Table of Content

1. Introduction.............................................................................................................................................2

2. Product Appearance..............................................................................................................................2

3. Main Characteristics..............................................................................................................................2

4. Installation and Preparation..................................................................................................................3

4.1 R207 Port Instruction.................................................................................................................................... 3

4.2 Hardware Connection ................................................................................................................................... 3

4.3 Power on ....................................................................................................................................................... 3

4.4 Restart the Device......................................................................................................................................... 3

4.5 Indicator........................................................................................................................................................ 3

4.6 Restore to Factory Setting............................................................................................................................. 4

5. Set up R207.............................................................................................................................................4

5.1 Connect to the device.................................................................................................................................... 4

5.2 Find the IP address of R207.......................................................................................................................... 4

5.3 Log in to the management interface of R207................................................................................................ 5

5.4 Status............................................................................................................................................................. 6

5.5 Internet Settings ............................................................................................................................................ 6

5.6 Management.................................................................................................................................................. 7

6. Smart Home Module Setup Instructions............................................................................................11

7. Important Maintenance Instructions..................................................................................................17

1. Introduction

R207 is a high reliable IoT gateway for smart home. R207 can communicate with the LoRa network

and act as a gateway in the LoRa network. It can be automatically added and configured. It is the

control core of the Netvox smart home network.

LoRa wireless technology:

LoRa is a wireless communication technology dedicated to long-distance low-power

consumption. Its spread-spectrum modulation method greatly increases the communication distance

compared with other communication methods, and can be widely used in long-distance low-rate IoT

wireless communication fields in various occasions. Such as automatic meter reading, building

automation equipment, wireless security systems, industrial monitoring and control. It has the

characteristics of small size, low power consumption, long transmission distance and strong

anti-interference ability.

2. Product Appearance

3. Main Characteristics

Communication distance is 5 km (depending on the specific environment)

Simple operation through third-party software control

4. Installation and Preparation

4.1 R207 Port Instruction

4.2 Hardware Connection

Use the network cable to connect the R207 to the home router. If there is a camera, users can connect

the camera under the same router to operate.

4.3 Power on

Plug a DC 5V 1.5A power adapter to R207. The power indicator will be on and ready for use. No

other operations are required.

4.4 Restart the Device

Press the Reset button at the bottom of the device to restart the device.

4.5 Indicator

Power indicator: It will be on after power-on, and will be off when power is off.

Cloud indicator: blinks when the cloud is not connected. It is always on after the connection is

successful.

4.6 Restore to Factory Setting

In the power-on state, press and hold the Reset button at the bottom of the device for more than 5

seconds, and the device can be restored to factory settings.

5. Set up R207

5.1 Connect to the device

Please connect the R207 LAN port to your computer with a network cable, power on the R207, and

turn on the DHCP service in the router.

5.2 Find the IPaddress of R207

Connect the computer to the home router, wired connection or WIFI connection. Log in to the

TP-link setting interface (refer to the TP-link manual for login method and password), select DHCP

server → client list in the left column, you can see the content as shown in the figure, find the

corresponding IP address according to the provided R207 MAC address.

5.3 Log in to the management interface of R207

Open the web browser, enter the IP address of R207 found in [5.2 Find the IP Address of R207] in

the URL address bar, and then press the Enter key or click the go button in the address bar to access

the R207 setting interface, as following Figure:

Enter the corresponding username and password (the administrator username and password are

operator; the client username and password are admin), click [Login], and the following module

page appears on the left side of the page after successful. Including state, network settings,

management, smart home four modules.

5.4 Status

Select the [Status] module. On the left page of the module, you can see five sub-function modules

including status, statistics, management, quick settings, and operation modules.

5.5 Internet Settings

(1) Select the [Internet Settings] module. The module mainly has LAN interface settings and WAN

interface settings. LAN interface setting (this page is used to configure the LAN parameters

connected to your access point LAN port. You can change the IP address, subnet mask, DHCP, etc.)

as shown below:

(2) WAN interface settings (This page is used to configure the LAN parameters connected to your

access point WAN port. You can change the IP address, subnet mask, DHCP, etc.) as shown below:

5.6 Management

The management module of R207 is mainly composed of statistics, time zone setting, denial of

service, system log, firmware upgrade, save/load settings and password.

(1) Statistics (This page shows the count of sending and receiving packets for wireless and Ethernet

networks) as shown below:

(2) Time zone settings (you can maintain system time by synchronizing the public time server on the

Internet) as shown below:

Description:

The NTP server update is enabled by default in the factory. The NTP server has three defaults as

follows:

NTP Server1: ntp7.aliyun.com

NTP Server2: time.stdtime.gov.tw

NTP Server3: time.windows.com

Make sure that the current time of the gateway is the same as the local time. Otherwise, the

timestamp verification will fails and it can not be connected to the cloud.

(3) Denial of service (a hacker tries to block the legitimate user of the service to use the service), as

shown in the following figure, the general user does not have to set it, and the setting may be

incorrect, which may result in the network being inaccessible.

(4) System log (this page can be used to set the remote log server and display system log) as shown

below

5) Upgrade the firmware (you can upgrade the access point firmware to the new version on this page)

as shown below

Tabla de contenidos

Otros manuales de Automatización del hogar de netvox

netvox

netvox Z809A Manual de usuario

netvox

netvox R809A01 Manual de usuario

Manuales populares de Automatización del hogar de otras marcas

Truth Hardware

Truth Hardware Sentry II Manual de usuario

FIBARO

FIBARO FGWPA-111 Manual de usuario

Hezborg

Hezborg BGR8016B Manual de usuario

MYDLINK

MYDLINK Pro Series Manual de usuario

Panasonic

Panasonic KX-HNA101FX Manual de usuario

GamaBit

GamaBit Houseper Manual de usuario

nedis

nedis WIFILRF10C37 Manual de usuario

Veho

Veho TA45 Manual de usuario

Nexa

Nexa ZPR-111 Manual de usuario

Vimar

Vimar 00801 Manual de usuario

Leviton

Leviton 47604-F6 Manual de usuario

EVERSPRING

EVERSPRING AN180 Manual de usuario

Coltech

Coltech 18-1339 Manual de usuario

IDS

IDS NXT vegas Guía

Vimar

Vimar 03975 Manual de usuario

iNels

iNels RFIM-20B Manual de usuario

EVA Logik

EVA Logik ZW30 Manual de usuario

Leviton

Leviton ODCØP-S0W Manual de usuario

netvox R207 Manual de usuario

Manuales populares de Automatización del hogar de otras marcas