Netvox RA0701 Manual de usuario

Model：RA0701_R72601_RA0701Y

Wireless CO Sensor

RA0701_R72601_RA0701Y

User Manual

This document contains proprietary technical information which is the property of NETVOX Technology. It shall

be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written

permission of NETVOX Technology. The specifications are subject to change without prior notice.

Table of Content

1.Introduction...............................................................................................................................................................2

2.Appearance................................................................................................................................................................2

3.Main Features............................................................................................................................................................4

4.Setup Instruction .......................................................................................................................................................4

5.DateReport ................................................................................................................................................................5

6.Installation.................................................................................................................................................................8

7.Important Maintenance Instruction.........................................................................................................................10

1. Introduction

RA0701_R72601_RA0701Y is a ClassA type device based on the LoRaWAN protocol.

The RA0701_R72601_RA0701Y data can be sent to the corresponding gateway via externally connecting the CO detector.

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other

communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance.

Widely used in long-distance, low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size, low power consumption,

transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and

gateways from different manufacturers.

2.Appearance

Figure 1 RA0701

(subject to the actual object)

CO Sensor

Function Key

Indicator

DC in

Figure2 R72601

(subject to the actual object)

Figure 3 RA0701Y

(subject to the actual object)

Waterproof Cover

Solar Panel

Built-in Battery Pack

Built-in CO Sensor

Power Cable

3.Main Features

Compatible with LoRaWAN

RA0701 and RA0701Y applies DC 12V adapters

R72601 applies solar and rechargeable lithium batteries

CO detection

Adopt SX1276 wireless communication module

4.Set up Instruction

On/Off

Power On RA0701 and RA0701Y are connected to DC 12V adapter for power on.

R72601 applies solar power and rechargeable lithium batteries.

Turn On Connect with power on to turn on

Restore to Factory Setting Press and hold the function key for 5 seconds, and the green indicator flashes 20 times.

Power Off Disconnect from the power supply

Note

1. The engineering test requires to write the engineering testing software separately.

2. The interval between on and off is suggested to be about 10 seconds to avoid the

interference of capacitor inductance and other energy storage components.

Network Joining

Never Join the Network

Turn on the device to search the network.

The green indicator keeps on for 5 seconds: success.

The green indicator remains off: fail

Had joined the network

(Not in the original setting)

Turn on the device to search the previous network.

The green indicator keeps on for 5 seconds: success.

The green indicator remains off: fail.

Fail to Join the Network Suggest checking the device registration information on the gateway or consulting your

platform server provider if the device fails to join the network.

Low Voltage Threshold

Low Voltage Threshold 10.5 V

5.Data Report

Function Key

Press and Hold for 5 Seconds

Restore to the original setting / Turn off

The green indicator flashes 20 times: success

The green indicator remains off: fail

Press once

The device is in the network: the green indicator flashes once and the device sends a data

report (It would take 35 seconds for the sensor to sample and process the collected value after

pressing the button)

The device is not in the network: the green indicator remains off

After power on, the device will immediately send a version packet report and data.

The device sends data according to the default configuration before any other configuring.

ReportMaxTime:

RA0701 and RA0701Y is 180s,

R72601 is 900s (subject to original setting)

ReportMinTime: 30s

ReportType count: 1

ReportChange: 0

* ReportChange is not supported by RA0701_R72601_RA0701Y (Invalid configuration).

* The value of the ReportMaxTime should be greater than ReportType count *ReportMinTime+10

Note:

(1) The device also supports the TxPeriod cycle configuration instructions of Cayenne. Therefore, the device can

perform the report according to the TxPeriod cycle. The particular report cycle is ReportMaxTime or TxPeriod

depending on which report cycle was configured last time.

(2) It would take 35 seconds for the sensor to sample and process the collected value after pressing the button,

please be patient.

(3) Data pocket: CO

The device reported data parsing please refer to Netvox LoRaWAN Application Command document and Netvox Lora

Command Resolver http://loraresolver.netvoxcloud.com:8888/page/index

Example of ConfigureCmd

FPort：0x07

Bytes 1 1 Var (Fix =9 Bytes)

CmdID DeviceType NetvoxPayLoadData

CmdID– 1 byte

DeviceType– 1 byte – Device Type of Device

NetvoxPayLoadData– var bytes (Max=9bytes)

(1)Configure RA0701 device parameter MinTime = 30s, MaxTime = 900s

Downlink: 0105001E03840000000000

Device Return:

8105000000000000000000 (configuration success)

8105010000000000000000 (configuration failure)

(2)Read RA0701 device parameter

Downlink: 0205000000000000000000

Device Return:

8205001E03840000000000 (device current parameter)

Description Device CmdID Device

Type NetvoxPayLoadData

Config

ReportReq

RA07 Series

R726 Series

RA07xxY

Series

0x01

0x05

0x09

0x0D

MinTime

(2bytes Unit:s)

MaxTime

(2bytes Unit: s)

Reserved

(5Bytes, Fixed 0x00)

Config

ReportRsp 0x81 Status

(0x00_success)

Reserved

(8Bytes, Fixed 0x00)

ReadConfig

ReportReq 0x02 Reserved

(9Bytes, Fixed 0x00)

ReadConfig

ReportRsp 0x82 MinTime

(2bytes Unit: s)

MaxTime

(2bytes Unit: s)

Reserved

(5Bytes, Fixed 0x00)

Example of ReportDataCmd

FPort：0x06

Bytes 1 1 1 Var(Fix=8 Bytes)

Version DeviceType ReportType NetvoxPayLoadData

Version– 1 byte –0x01——the Version of NetvoxLoRaWAN Application Command Version

DeviceType– 1 byte – Device Type of Device

The devicetype is listed in Netvox LoRaWAN Application Devicetype doc

ReportType – 1 byte –the presentation of the NetvoxPayLoadData，according the devicetype

NetvoxPayLoadData– Fixed bytes (Fixed =8bytes)

Device Device

Type

Report

Type NetvoxPayLoadData

RA07 Series

R726 Series

RA07xxY Series

0x05

0x09

0x0D

0x05 Battery

(1Byte, unit:0.1V)

(2Byte ,0.1ppm)

Reserved

(1Bytes,fixed 0x00)

Uplink 1: 01050500FFFF0064FFFF00 (RA0701)

1st byte (01): Version

2ndbyte (05): DeviceType 0x05 －RA07 Series

3rdbyte (05): ReportType

4th byte (00): DC power supply

5th6th byte (FFFF): O3

7th 8th byte (0064): CO －10ppm , 64 Hex=100 Dec 100*0.01=10 ppm

9th10th byte (FFFF): NO

11th byte (00): Reserved

Uplink 2: 01090578FFFF0064FFFF00 (R72601)

1st byte (01): Version

2nd byte (09): DeviceType 0x09 －R726 Series

3rd byte (05): ReportType

4th byte (78): Battery－12v , 78 Hex=120 Dec 120*0.1v=12v

5th6th byte (FFFF): O3

7th 8th byte(0064): CO －10ppm , 64 Hex=100 Dec 100*0.01=10 ppm

9th10th byte (FFFF): NO

11th byte (00): Reserved

Uplink 1: 010D0500FFFF0064FFFF00 (RA0701Y)

1st byte (01): Version

2ndbyte (0D): DeviceType 0x0D －RA07xxY Series

3rdbyte (05): ReportType

4th byte (00): DC power supply

5th6th byte (FFFF): O3

7th 8th byte (0064): CO －10ppm , 64 Hex=100 Dec 100*0.01=10 ppm

9th10th byte (FFFF): NO

11th byte (00): Reserved

p.s. RA0701/R72601/RA0701Y only detect CO, it does not detect NO and O3, therefore the returned value of NO and O3

would be “FFFF”.

6. Installation

1. The RA0701 product does not have a waterproof function.

After the network adding configuration is completed, please place it properly.

The sensor should be placed in a sheltered environment from the wind and rain, and the wall should be perpendicular to the

ground at 90 degrees. Keep the sensor air vent hole directly below to prevent water to enter.

At the same time, in order to ensure the accuracy of the measurement, please install the carbon monoxide transmitter in a well

ventilated position.

2. The R72601 product is waterproof. After the network-joining is completed, please leave it outdoors.

(1) In the position to be installed, loosen the U-shaped screw of the bottom of the R72601 and the mating washer nut, and fix the

U-shaped screw through the appropriate size cylinder on the R72601 fixed strut piece. Install the washer nut in order, lock

the nut till R72601 body is stable and does not shake.

(2)At the upper side of the fixed position of R72601, loosen the two U-shaped screws on the side of the solar panel and the

mating washer nut. Fix the U-shaped screw through the appropriate size cylinder on the main bracket of the solar panel, and

install the gasket in sequence. Lock nut till the solar panel is stable and does not shake.

(3)Adjust the angle of the solar panel. After the adjustment is completed, lock the nut.

(4) Connect the R72601 top waterproof cable to the solar panel wiring and lock it tight.

(5) R72601 has a battery pack inside, users can buy and install rechargeable 18650 lithium battery, a total of 3 sections, a single

rechargeable lithium battery voltage 3.7V, capacity recommended 5000mah, the installation of rechargeable lithium battery

steps are as follows:

1: Remove the four screws around battery cover.

2: Insert three 18650 lithium batteries. (Please make sure the positive and negative level of the battery)

3: Press the activation button on the battery pack for the first time.

4: After activation, close the battery cover and lock the screws around battery cover.

Fig. Rechargeable Lithium Battery

activation button

Otros manuales para RA0701

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de netvox

netvox

netvox R727 Manual de usuario

netvox

netvox R718N1 Manual de usuario

netvox

netvox R718UBB Series Manual de usuario

netvox

netvox R718EB Manual de usuario

netvox

netvox R718LB Manual de usuario

netvox

netvox R311B Manual de usuario

netvox

netvox R712 Manual de usuario

netvox

netvox R72632A Manual de usuario

netvox

netvox R718EA Manual de usuario

netvox

netvox R718AD Manual de usuario

netvox

netvox R718DB2 Manual de usuario

netvox

netvox R718J Manual de usuario

netvox

netvox R718PA1 Manual de usuario

netvox

netvox R718PQ Manual de usuario

netvox

netvox R718DB Manual de usuario

netvox

netvox R718PA Series Manual de usuario

netvox

netvox R718LB2 Manual de usuario

netvox

netvox R311CA Manual de usuario

netvox

netvox R711 Manual de usuario

netvox

netvox R718N3 Manual de usuario

netvox

netvox RA0716 Manual de usuario

netvox

netvox R315 Series Manual de usuario

netvox

netvox R311G Manual de usuario

netvox

netvox R313B Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

netvox RA0701 Manual de usuario

Manuales populares de Accesorios de otras marcas