Netvox R718PA Series Manual de usuario

Model: R718PA10

Wireless Turbidity Sensor

R718PA10

User Manual

This document contains proprietary technical information which is the property of NETVOX Technology. It shall

be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written

permission of NETVOX Technology. The specifications are subject to change without prior notice.

Table of Content

1. Introduction .........................................................................................2

2. Appearance..........................................................................................3

3. Main Feature........................................................................................3

4. Set Up Instruction................................................................................4

5. Data Report..........................................................................................5

6. Installation...........................................................................................7

7. Important Maintenance Instruction.....................................................9

1.Introduction

R718PA10 is a Class A device based on the LoRaWANTM protocol of Netvox and is compatible with LoRaWAN protocol.

R718PA10 can be connected with a turbidity sensor (RS485) externally and report the turbidity value and the temperature of the

solution collected by the device to the corresponding gateway.

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other

communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance.

Widely used in long-distance, low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size, low power consumption,

transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and

gateways from different manufacturers.

2.Appearance

3.Main Feature

⚫Adopt SX1276 wireless communication module

⚫RS485 communication

⚫12V DC power supply

⚫Detecting the turbidity value and the temperature of the solution

⚫The base is attached with a magnet that can be attached to a ferromagnetic material object

⚫Main body protection level IP65 / IP67 (Optional)

⚫Compatible with LoRaWANTM Class A

⚫Frequency hopping spread spectrum technology

⚫Configuring parameters and reading data via the third-party software platforms, and set alarms via SMS text and email

(optional)

⚫Applicable to the third-party platforms: Actility/ ThingPark/ TTN/ MyDevices/ Cayenn

Note:

Battery life is determined by the sensor reporting frequency and other variables, please refer to

http://www.netvox.com.tw/electric/electric_calc.html

On this website, users can find battery lifetime for varied models at different configurations.

Turbidity Sensor

Indicator

Function Key

4.Set Up Instruction

On/Off

Power On

DC12V adapter

Turn On

DC12V power supply, the green indicator flashing once means turn on successfully.

Restore To Factory Setting

Press and hold the function key for 5 seconds, and the green indicator flashes 20 times.

Power Off

Remove DC12V adapter

Note

1. On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor

inductance and other energy storage components.

2. The first 5 seconds after power on, the device will be in engineering test mode.

Network Joining

Never Join the Network

Turn on the device to search the network.

The green indicator keeps on for 5 seconds: success.

The green indicator remains off: fail

Had Joined the Network

(Not restore to the factory setting)

Turn on the device to search the previous network.

The green indicator keeps on for 5 seconds: success.

The green indicator remains off: fail.

Fail to Join the Network

Suggest checking the device registration information on the gateway or consulting your

platform server provider if the device fails to join the network.

Function Key

Press and Hold for 5 Seconds

Restore to the original setting

The green indicator flashes 20 times: success

The green indicator remains off: fail

Press once

The device is in the network: the green indicator flashes once and the device sends a data

report

The device is not in the network: the green indicator remains off

5.Data Report

After power on, the device will immediately send a version packet report. Then, it will send another report with the data of the turbidity

value and the temperature of the solution after it is powered on for 20s.

The device sends data according to the default configuration before any other configuring.

Default setting:

MaxTime: Max Interval = 3min = 180s

MinTime: The MinTime configuration is not available.

* But the software has restriction, MinTime must be configured a number greater than 0.

Note:

1. Report interval is based on the factory default.

2. R718PA10 reports the turbidity value and the temperature of the solution.

3. The device reported data parsing please refer to Netvox LoRaWAN Application Command document and

Netvox LoRa Command Resolver http://loraresolver.netvoxcloud.com:8888/page/index

Example of ReportDataCmd

FPort：0x06

Bytes

Var(Fix=8 Bytes)

Version

DeviceType

ReportType

NetvoxPayLoadData

Version–1 byte –0x01——the Version of NetvoxLoRaWAN Application Command Version

DeviceType–1 byte –Device Type of Device

ReportType –1 byte –the presentation of the NetvoxPayLoadData，according the devicetype

NetvoxPayLoadData–Fixed bytes (Fixed =8bytes)

Device

Type

Report

Type

NetvoxPayLoadData

R718PA series

(R718PA10)

0x57

0x09

Battery

(1Byte, unit:0.1V)

NTU

(2Byte ,0.1ntu)

TemperaturewithNTU

(Signed 2Bytes,unit:0.01°C)

EC5SoildHumidtiy

(2Bytes,unit:0.01%)

Reserved

(1Bytes,fixed 0x00)

Uplink: 0157090007D009E2FFFF00

1st byte (01): Version

2nd byte (57): DeviceType－R718PA Series

3rd byte (09): Report Type

4th byte (00): Battery; When Battery is 0x00, it represents is powered by DC/AC power source

5th 6th byte(07D0): NTU(Turbidity), 7D0 Hex = 2000 Dec, 2000*0.1 ntu = 200 ntu

7th 8th byte (09E2): Temperature with NTU, 9E2 Hex = 2530 Dec, 2530*0.01°C= 25.3°C

9th 10th byte (FFFF): Soil Humidity, please ignore.

11th byte (00): Reserved

Example of ConfigureCmd

FPort：0x07

Bytes

Var (Fix =9 Bytes)

CmdID

DeviceType

NetvoxPayLoadData

CmdID–1 byte

DeviceType–1 byte –Device Type of Device

NetvoxPayLoadData–var bytes (Max=9bytes)

(1)Configure R718PA10 device parameter MaxTime = 1min

(The MinTime configuration is useless, but it needs to be set greater than 0 because of the software limitation.)

Downlink: 0157000A003C0000000000

Device Return:

8157000000000000000000 (configuration success)

8157010000000000000000 (configuration failure)

(1)Read R718PA10 device parameter

Downlink: 0257000000000000000000

Device Return:

8257000A003C0000000000 (device current parameter)

Description

Device

Cmd

Device

Type

NetvoxPayLoadData

ConfigReport

Req

R718PA10

0x01

0x57

MinTime

(2bytes Unit: s)

MaxTime

(2bytes Unit: s)

Reserved

(5Bytes,Fixed 0x00)

ConfigReport

Rsp

0x81

Status

(0x00_success)

Reserved

(8Bytes, Fixed 0x00)

ReadConfig

ReportReq

0x02

Reserved

(9Bytes, Fixed 0x00)

ReadConfig

ReportRsp

0x82

MinTime

(2bytes Unit: s)

MaxTime

(2bytes Unit: s)

Reserved

(5Bytes,Fixed 0x00)

6.Installation

1. R718PA10 has the built-in magnet (as the figure below)

which can be attached to the surface of an iron object

during installation, which is convenient and quick.

In order to make the installation firmer, please use screws

(purchased separately) to fix the device to the wall or other

surface (as Figure below).

Note:

Do not install the device in a metal shielded box or in an

environment surrounded by other electrical equipment to

avoid affecting the wireless transmission of the device.

2. R718PA10 regularly reports the data of the turbidity value

and the temperature of the solution according to MaxTime.

The default Max Time is 3 minutes.

Note:

MaxTime can be modified by the downlink command, but it

is recommended not to set the interval too short.

R718PA10 can be applied to detecting the turbidity and the

temperature of the solution.

Example:

⚫Water Quality Monitor

Screw

Fixation

Screw

Fixation

Turbidity Sensor

R718PA10

Socket

Adapter 12V

Note:

1. The probe contains sensitive optical and electronic components. Make sure that the probe is not subject to severe mechanical

shocks. There are no parts inside the probe that need users’ maintenance.

2. The black plastic cap on the head of the turbidity sensor should be removed during the test; otherwise, it will affect the

measurement.

Maintenance Method

1. External Surface of The Sensor:

Use tap water to clean the external surface of the sensor. If there are still debris remaining, wipe it with a moistened soft cloth.

For some stubborn dirt, users can add some household detergent to the tap water to clean it.

2. Check the Cable of The Sensor:

The cable should not be taut during normal operation; otherwise, the internal wires of the cable may break and the sensor

cannot work normally.

3. Check whether the measuring part of the sensor is dirty, and whether the cleaning brush is normal.

7.Important Maintenance Instruction

Kindly pay attention to the following in order to achieve the best maintenance of the product:

• Keep the device dry. Rain, moisture, or any liquid, might contain minerals and thus corrode electronic circuits. If the device gets

wet, please dry it completely.

• Do not use or store the device in dusty or dirty environment. It might damage its detachable parts and electronic components.

• Do not store the device under excessive heat condition. High temperature can shorten the life of electronic devices, destroy

batteries, and deform or melt some plastic parts.

• Do not store the device in places that are too cold. Otherwise, when the temperature rises to normal temperature, moisture will

form inside, which will destroy the board.

• Do not throw, knock or shake the device. Rough handling of equipment can destroy internal circuit boards and delicate

structures.

• Do not clean the device with strong chemicals, detergents or strong detergents.

• Do not apply the device with paint. Smudges might block in the device and affect the operation.

• Do not throw the battery into the fire, or the battery will explode. Damaged batteries may also explode.

All of the above applies to your device, battery and accessories. If any device is not working properly, please take it to the

nearest authorized service facility for repair.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de netvox

netvox

netvox R311CA Manual de usuario

netvox

netvox R718F Manual de usuario

netvox

netvox R311FA1 Manual de usuario

netvox

netvox R311B Manual de usuario

netvox

netvox R718EA Manual de usuario

netvox

netvox R718VB Manual de usuario

netvox

netvox R718VB Manual de usuario

netvox

netvox RA0711 Manual de usuario

netvox

netvox ZigBee Z311G Manual de usuario

netvox

netvox R718PA4 Manual de usuario

netvox

netvox R718PA5 Manual de usuario

netvox

netvox R718CXAB Manual de usuario

netvox

netvox R712 Manual de usuario

netvox

netvox RA0716 Manual de usuario

netvox

netvox R720F Manual de usuario

netvox

netvox R718F2 Manual de usuario

netvox

netvox R313FA1 Manual de usuario

netvox

netvox R718PE Manual de usuario

netvox

netvox R718VA Manual de usuario

netvox

netvox R718PB13 Manual de usuario

netvox

netvox Contact Sensor Series Manual de usuario

netvox

netvox Z311C Manual de usuario

netvox

netvox R313B Manual de usuario

netvox

netvox RB11E Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

netvox R718PA Series Manual de usuario

Manuales populares de Accesorios de otras marcas