Netis DL4311 Manual de usuario

150Mbps Wireless N ADSL2+ Modem

Router

Wireless N ADSL2+ Modem Router Quick Installation Guide

1. Hardware Installation

Step 1: Connect the ADSL Line.

Method one: Plug one end of the twisted-pair ADSL cable into the

ADSL LINE port on the rear panel of the modem router, and insert

the other end into the wall socket.

Method two: You can use a separate splitter. The external splitter

has three ports:

• Line: Connect to the wall jack

• Phone: Connect to the phone sets

• Modem: Connect to the ADSL LINE port of the modem router

Step 2: Connect the Ethernet cable. Attach one end of a network

cable to your computer's Ethernet port or a regular hub/switch port,

and the other end to the LAN port on the modem router.

Step 3: Power on the computers and modem router.

Step 4: Attach the power adapter. Connect the power adapter to the

power connector on the rear of the device and plug in the adapter to

a wall outlet or power extension.

Wireless N ADSL2+ Modem Router Quick Installation Guide

Name Status Indication

PWR On Power is on.

Off Power is off.

ADSL

Flash The ADSL negotiation is in progress.

On The LINE port is linked up.

Off The LINE port is linked down.

Internet

Flashing Data is being transferred over the

Internet.

On The modem router is initializing in the

first 10 seconds when power is up.

Or a successful PPP connection has been

built.

Off

There is no successful PPP connection or

the modem router works on Bridge mode.

WLAN

Flash There is wireless data being transmitted.

On The wireless function is enabled but no

data is being transmitted.

Off The wireless function is disabled.

WPS Off WPS connection process is not activated.

There's no wireless device trying to

connect to the network by WPS function.

Flash WPS function is activated. The modem

router's waiting for the WPS connection

from a wireless device. This process will

last in the first 2 minutes.

Wireless N ADSL2+ Modem Router Quick Installation Guide

2. Configure PC

For Windows 7 as an example, other OS refer to set up.

Step 1: Click , then select the Open Network and Sharing

Center.

Step 2: Click the Change adapter settings.

LAN(1-4) Flash Data is being transferred over the 1-4

(LAN) port.

There is a successful connection on the

corresponding 1-4 (LAN) port but no

activity.

Off

There is no connection on the

corresponding 1-4 (LAN) port or the

connection is abnormal.

Wireless N ADSL2+ Modem Router Quick Installation Guide

Step 3: Click Local Area Connection with the right button of your

mouse. Then select Properties.

Step 4: Double click the “Internet Protocol Version 4(TCP/IPv4)”.

Wireless N ADSL2+ Modem Router Quick Installation Guide

Step 5: Select the “Obtain an IP address automatically” as below.

Then click “OK”.

3. Login and Quick Start

Step 1:Start your web browser and type the private IP address of the

modem router in the URL field: 192.168.1.1.

Then,enter the default User Name guest and the default Password

guest, then click Login.

Wireless N ADSL2+ Modem Router Quick Installation Guide

Step 2: And then click OK to access to the Quick Start screen. Click

START to start Quick Start guide.

Step 3: The Wizard will guide you through these four quick steps.

Begin by clicking on NEXT

Step 4: Click Cancel if you know the correct PVC(VPI/VCI) from

your ISP, you can input the value manually. And if you don’t know

the correct value, please click OK , it will take a moment to search

for the available PVC.

Wireless N ADSL2+ Modem Router Quick Installation Guide

Step 5: After the PVC value be input or searched, please click NEXT.

Step 6: Select the Internet connection type to connect to your ISP,

click NEXT to continue.

We will take PPPoE/PPPoA for example throughout this Guide. (For

most DSL user)

Step 7: Enter the PPPoE/PPPoA information provided to you by your

ISP, click NEXT to continue.

Wireless N ADSL2+ Modem Router Quick Installation Guide

Step 8: You may enable/disable Wireless, change the wireless SSID

and authentication type in this page, then click NEXT to continue.

Note: The default SSID and Password are “netis”and “password”.

Step 9: Click NEXT to save the current settings, then click CLOSE to

finish the Quick Start.

Otros manuales para DL4311

Tabla de contenidos

Otros manuales de Enrutador inalámbrico de Netis

Netis

Netis BEACON N 300 Manual de usuario

Netis

Netis WF2501 Manual de usuario

Netis

Netis WF2409 Manual de usuario

Netis

Netis WF2414 Manual de usuario

Netis

Netis WF2411I Manual de usuario

Netis

Netis WF2419V2 Manual de usuario

Netis

Netis ADSL2+ Modem With Wireless-N Router Manual de usuario

Netis

Netis WF2419 Manual de usuario

Netis

Netis WF2322 Manual de usuario

Netis

Netis MW Series Manual de usuario

Netis

Netis WF-2402 Manual de usuario

Netis

Netis WF2411PS Manual de usuario

Netis

Netis WF-2404 Manual de usuario

Netis

Netis WF-2406 Manual de usuario

Netis

Netis WF-2409B Manual de usuario

Netis

Netis WF-2403 Manual de usuario

Netis

Netis WF2409 Manual de usuario

Manuales populares de Enrutador inalámbrico de otras marcas

Milesight

Milesight UG67 Manual de usuario

Airlogic

Airlogic AirSync Class 1 Manual del propietario

Samsung

Samsung WCH730B Manual de usuario

TELEFONICA

TELEFONICA USB Adapter Manual de usuario

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manual de usuario

Askey

Askey RAC2V1K Manual de usuario

Alloy

Alloy WLF2454AP-S Manual de usuario

TP-Link

TP-Link TL-WR542G Manual de usuario

NETGEAR

NETGEAR WNR2000v4 Manual de usuario

Hama

Hama 53120 Manual de usuario

Intellinet

Intellinet 524582 Manual de usuario

Asus

Asus RT-N10P Manual de usuario

D-Link

D-Link DIR-506L Manual de usuario

Sapido

Sapido GR297n Manual de usuario

Asus

Asus DSL-N55U Manual de usuario

AMTC

AMTC WR7502 Manual de usuario

Compaq

Compaq CP-2W - iPAQ Connection Point Manual de usuario

SMC Networks

SMC Networks WBR14-N2 FICHE Manual de usuario