NETGEAR WG302v1 - ProSafe 802.11g Wireless Access... Guía rápida

Otros manuales para WG302v1 - ProSafe 802.11g Wireless Access...

3

Este manual sirve para los siguientes modelos

2

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de NETGEAR

NETGEAR

NETGEAR WAC104 Manual de usuario

NETGEAR

NETGEAR WAB102 - 802.11a+b Dual Band Wireless Access... Manual de usuario

NETGEAR

NETGEAR WG602v4 - Wireless Access Point Manual de usuario

NETGEAR

NETGEAR WAX206 Manual de usuario

NETGEAR

NETGEAR XWNB5201 Manual de usuario

NETGEAR

NETGEAR WN370 Manual de usuario

NETGEAR

NETGEAR WG602v4 - Wireless Access Point Manual de usuario

NETGEAR

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access... Manual de usuario

NETGEAR

NETGEAR HE102 - Wireless Access Point Manual de usuario

NETGEAR

NETGEAR WG103 ProSafe Manual de usuario

NETGEAR

NETGEAR Orbi RBR40 Manual de usuario

NETGEAR

NETGEAR WAX630E Manual de usuario

NETGEAR

NETGEAR ME103 - 802.11b ProSafe Wireless Access... Manual de usuario

NETGEAR

NETGEAR N150 WN604 Manual de usuario

NETGEAR

NETGEAR WG302 - 802.11g ProSafe Wireless Access... Manual de usuario

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Manual de usuario

NETGEAR

NETGEAR ProSafe WNAP320 Manual de usuario

NETGEAR

NETGEAR WG302 - 802.11g ProSafe Wireless Access... Manual de usuario

NETGEAR

NETGEAR WNHDE111 Manual

NETGEAR

NETGEAR WN802T-100NAS Manual de usuario

NETGEAR

NETGEAR WAG302 Manual de usuario

NETGEAR

NETGEAR WAG102 - ProSafe Dual Band Wireless Access... Manual de usuario

NETGEAR

NETGEAR EX7000 Manual de usuario

NETGEAR

NETGEAR Powerline 500 XWN5001 Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

WG302v2, WAG302v2 –DHCP: Use and Configuration

The WG302v2/WAG302v2 can act as a DHCP server for wireless client. The

WG302v2/WAG302v2 provides the pre-configured TCP/IP configuration for wireless clients

connected to the access point.

The WG302v2/WAG302v2 DHCP server only assigns network information to clients that connect

to the access point through security profiles that are on the same VLAN as security profile 1.

VLAN 1 is the default VLAN for all security profiles.

Enabling the DHCP server on the WG302v2/WAG302v2 causes Network Address

Translation (NAT) to be enabled on the access point - The WG302v2/WAG302v2 in this case

acts similar to a NAT router for the wireless clients who receive their network information from the

access point. All network traffics from the wireless client designated to the wired network are

NAT-ed to the access point’s LAN IP address.

As a result, the DHCP network (wireless network) configured in the WG302v2/WAG302v2 DHCP

settings must be in a different subnet than the wired network.

NETGEAR

Internet Access RouterFirewall

LOCAL

PWR TEST 1 2

LNK

INTERNET

ACT 4

100

LNK/ACT

3

MODEL

FR314

Router

192.168.0.1

Wireless Clients 192.168.1.2-192.168.2.50

Wired device 192.168.0.x

192.168.0.228

WG302v2/WAG302v2

In the above example, the wired network where the router and the access point resided is

192.168.0.0/24. When enabling the DHCP server on the WG302v2/WAG302v2, the DHCP

network must be in a different subnet than 192.168.0.0/24. In our example, we use

192.168.1.0/24.

To enable DHCP server on the WG302v2/WAG302v2, go to Advanced->IP Settings in the access

point’s management interface. Select the radio button to enable DHCP server. Enter the starting

and ending IP Address of the DHCP pool, subnet mask, gateway IP address, primary and

secondary DNS server addresses, primary and secondary WINS server addresses and lease

time. Click Apply.

Wireless clients connect to the WG302v2/WAG302v2 will receive one of the addresses from the

DHCP pool. However, DNS Server address assigned to the wireless client will always be the

same address as the default gateway address. It was because the WG302v2/WAG302v2 uses

DNS proxying. The wireless client’s DNS requests are sendt to the access point then proxy to the

designated DNS Server specified in the DHCP setting.

This is specific for v2 of WG302 and WAG302. WG302v1 and WAG302v1 DHCP server works

differently. Refer to the reference manuals of WG302v1 and WAG302v1 on how to setup DHCP

server on those access points.