NETGEAR ProSAFE GS105Ev2 Manual de usuario

User Manual

Gigabit Ethernet Smart Managed Plus

Switches

Models

GS105Ev2

GS105PE

GS108Ev3

GS108PEv3

GS116Ev2

JGS516PE

JGS524Ev2

JGS524PE

NETGEAR, Inc.

350 E. Plumeria DriveOctober 2018 San Jose, CA 95134, USA202-11700-04

Support

Thank you for purchasing this NETGEAR product. You can visit

https://www.netgear.com/support/ to register your product, get help, access the latest

downloads and user manuals, and join our community. We recommend that you use

only official NETGEAR support resources.

Compliance and Conformity

For regulatory compliance information including the EU Declaration of Conformity, visit

https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Do not use this device outdoors. If you connect cables or devices that are outdoors to

this device, see http://kb.netgear.com/000057103 for safety and warranty information.

Trademarks

Any non-NETGEAR trademarks are used for reference purposes only.

Gigabit Ethernet Smart Managed Plus Switches

Revision History

CommentsPublish DatePublication

Part Number

Added a note to Manage Access Control on page 58 to state that models GS108Ev3

and GS108PEv3 do not support access control.

October 2018202-11700-04

•Changed the manual name from ProSAFE Gigabit Web Managed (Plus) Switches User

Manual to Gigabit Ethernet Smart Managed Plus Switches User Manual.

•Added Safety Instructions and Warnings on page 7.

•Revised Configure the Switch on page 9.

•Revised Access a Switch That Is Connected to a Network on page 10.

•Revised Install the ProSAFE Plus Utility on page 13.

•Added Use the NETGEAR Switch Discovery Tool to Access the Switch on page 15.

•Added Use the NETGEAR Insight Mobile App to Discover the Switch on page 16.

•Added Change the Language on page 17, including Change the Language of the

Local Browser Interface on page 18 and Change the Language for the Local Browser

Interface by Installing Another Firmware Version on page 18.

•Added Manage Access Control on page 58 including Add Devices to the Access

Control Table on page 58 and Remove Devices From the Access Control Table on

page 59.

•Added PoE Considerations for Switches That Support PoE on page 63.

•Added PoE Troubleshooting Suggestions on page 67.

•Removed references to the resource CD.

•Made multiple minor changes.

October 2018202-11700-03

Made corrections to Specify a Port PVID for an 802.1Q-Based VLAN on page 30.March 2017202-11700-02

First publication.August 2016202-11700-01

Gigabit Ethernet Smart Managed Plus Switches

Contents

Chapter 1 Get Started

Supported Switches..............................................................................7

Safety Instructions and Warnings.......................................................7

Configure the Switch............................................................................9

Access the Switch Using a Web Browser.........................................10

Access a Switch That Is Connected to a Network......................10

Access a Switch That Is Off-Network...........................................12

Access the Switch With the ProSAFE Plus Utility............................12

Install the ProSAFE Plus Utility......................................................13

Access and Configure the Switch Using the ProSAFE Plus

Utility................................................................................................13

Use the NETGEAR Switch Discovery Tool to Access the Switch....15

Use the NETGEAR Insight Mobile App to Discover the Switch....16

Change the Password........................................................................16

Change the Language.......................................................................17

Change the Language of the Local Browser Interface..............18

Change the Language for the Local Browser Interface by Installing

Another Firmware Version............................................................18

Chapter 2 Use VLANS for Traffic Segmentation

VLAN Overview...................................................................................22

Create Basic Port-Based VLANs........................................................22

Assign Ports to Multiple Port-Based VLANs....................................24

Create 802.1Q-Based VLANs in a Basic Configuration.................26

Create 802.1Q-Based VLANs in an Advanced Configuration......27

Add Tagged or Untagged Ports to an 802.1Q-Based VLAN........29

Specify a Port PVID for an 802.1Q-Based VLAN.............................30

Chapter 3 Optimize Performance With Quality of Service

Enable 802.1p/DSCP-Based Quality of Service..............................33

Configure Port-Based Quality of Service.........................................34

Set Up Rate Limiting...........................................................................35

Set Up Broadcast Filtering.................................................................36

Chapter 4 Manage Network Settings

Specify IP Address Settings for the Switch......................................40

Use Browser-Based Access to Specify the Switch IP Address...40

Use the ProSAFE Plus Utility to Specify the Switch IP Address.41

Manage Multicast Traffic With IGMP Snooping..............................42

Customize IGMP Snooping...........................................................43

Specify a VLAN for IGMP Snooping.............................................44

Set Up Link Aggregation Groups.....................................................45

Chapter 5 Manage and Monitor the Switch

Manage Flow Control........................................................................49

Manage the Port Speed and the Port Status...................................50

Enable Loop Detection......................................................................51

Manage Power Saving Options........................................................52

Download and Update the Firmware..............................................53

Reboot the Switch...............................................................................55

Save the Switch Configuration..........................................................55

Restore a Saved Switch Configuration.............................................56

Restore Factory Default Settings......................................................57

Manage Access Control.....................................................................58

Add Devices to the Access Control Table..................................58

Remove Devices From the Access Control Table......................59

Enable Port Mirroring.........................................................................60

View Switch Information or Change the Switch Device Name.....61

View or Clear the Port Statistics........................................................62

PoE Considerations for Switches That Support PoE......................63

Chapter 6 Diagnostics and Troubleshooting

Test Cable Connections.....................................................................66

Resolve a Subnet Conflict to Access the Switch.............................67

PoE Troubleshooting Suggestions...................................................67

Appendix A Factory Default Settings

Gigabit Ethernet Smart Managed Plus Switches

Get Started

This chapter covers the following topics:

• Supported Switches

• Safety Instructions and Warnings

• Configure the Switch

• Access the Switch Using a Web Browser

• Access the Switch With the ProSAFE Plus Utility

• Use the NETGEAR Switch Discovery Tool to Access the Switch

• Use the NETGEAR Insight Mobile App to Discover the Switch

• Change the Password

• Change the Language

• Register Your Product

Note: This user manual complements the installation guide that came with your switch.

You can also download the installation guide by visiting netgear.com/support/download/.

Note: For more information about the topics covered in this manual, visit the support

website at netgear.com/support.

Note: Firmware updates with new features and bug fixes are made available from time

to time at netgear.com/support/download/. You can check for and download new

firmware manually. If the features or behavior of your product does not match what is

described in this guide, see the latest firmware release notes for your switch model.

Supported Switches

The Gigabit Ethernet Smart Managed Plus Switches User Manual describes the following

switch models:

•GS105Ev2

•GS105PE

•GS108Ev3

•GS108PEv3

•GS116Ev2

•JGS516PE

•JGS524Ev2

•JGS524PE

Note: Smart Managed Plus Switches used to be called Web Managed (Plus) Switches.

Safety Instructions and Warnings

Use the following safety guidelines to ensure your own personal safety and to help

protect your system from potential damage.

To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,

observe the following precautions:

•This product is designed for indoor use only in a temperature-controlled and

humidity-controlled environment. For more information, see the environmental

specifications in the appendix or the data sheet.

Any device that is located outdoors and connected to this product must be properly

grounded and surge protected.

Failure to follow these guidelines can result in damage to your NETGEAR product,

which might not be covered by NETGEAR’s warranty, to the extent permissible by

applicable law.

•Observe and follow service markings:

- Do not service any product except as explained in your system documentation.

Some devices should never be opened.

-If applicable to your device, opening or removing covers that are marked with

the triangular symbol with a lightning bolt can expose you to electrical shock.

User Manual7Get Started

Gigabit Ethernet Smart Managed Plus Switches

We recommend that only a trained technician services components inside these

compartments.

•If any of the following conditions occur, unplug the product from the electrical outlet

and replace the part or contact your trained service provider:

- Depending on your device, the power adapter, power adapter cable, power

cable, extension cable, or plug is damaged.

-An object fell into the product.

- The product was exposed to water.

- The product was dropped or damaged.

-The product does not operate correctly when you follow the operating

instructions.

•Keep your system away from radiators and heat sources. Also, do not block cooling

vents.

•Do not spill food or liquids on your system components, and never operate the

product in a wet environment. If the system gets wet, see the appropriate section in

your troubleshooting guide, or contact your trained service provider.

•Do not push any objects into the openings of your system. Doing so can cause fire

or electric shock by shorting out interior components.

•Use the product only with approved equipment.

•If applicable to your device, allow the product to cool before removing covers or

touching internal components.

•Operate the product only from the type of external power source indicated on the

electrical ratings label. If you are not sure of the type of power source required,

consult your service provider or local power company.

•To avoid damaging your system, if your device uses a power supply with a voltage

selector, be sure that the selector is set to match the power at your location:

-115V, 60 Hz in most of North and South America and some Far Eastern countries

such as South Korea and Taiwan

- 100V, 50 Hz in eastern Japan and 100V, 60 Hz in western Japan

-230V, 50 Hz in most of Europe, the Middle East, and the Far East

•Be sure that attached devices are electrically rated to operate with the power available

in your location.

•Depending on your device, use only a supplied power adapter or approved power

cable:

User Manual8Get Started

Gigabit Ethernet Smart Managed Plus Switches

If your device uses a power adapter:

-If you were not provided with a power adapter, contact your local NETGEAR

reseller.

-The power adapter must be rated for the product and for the voltage and current

marked on the product electrical ratings label.

If your device uses a power cable:

-If you were not provided with a power cable for your system or for any

AC-powered option intended for your system, purchase a power cable approved

for your country.

-The power cable must be rated for the product and for the voltage and current

marked on the product electrical ratings label. The voltage and current rating of

the cable must be greater than the ratings marked on the product.

•To help prevent electric shock, plug the system and peripheral power cables into

properly grounded electrical outlets.

•If applicable to your device, the peripheral power cables are equipped with

three-prong plugs to help ensure proper grounding. Do not use adapter plugs or

remove the grounding prong from a cable. If you must use an extension cable, use

a three-wire cable with properly grounded plugs.

•Observe extension cable and power strip ratings. Make sure that the total ampere

rating of all products plugged into the extension cable or power strip does not

exceed 80 percent of the ampere ratings limit for the extension cable or power strip.

•To help protect your system from sudden, transient increases and decreases in

electrical power, use a surge suppressor, line conditioner, or uninterruptible power

supply (UPS).

•Position system cables, power adapter cables, or power cables carefully. Route

cables so that they cannot be stepped on or tripped over. Be sure that nothing rests

on any cables.

•Do not modify power adapters, power adapter cables, power cables or plugs. Consult

a licensed electrician or your power company for site modifications.

•Always follow your local and national wiring rules.

Configure the Switch

Gigabit Ethernet Smart Managed Plus Switches are plug-and-play, so they can be used

without any configuration. Just connect power, connect to your network and to your

other devices, and you’re done.

User Manual9Get Started

Gigabit Ethernet Smart Managed Plus Switches

For easiest access, we recommend that you cable the switch to a network with a router

or DHCP server that assigns IP addresses and power on the switch. However, it is also

possible to configure the switch connected directly only to the computer that you are

using to configure it, and not connected to the network (off-network).

You can configure and manage advanced features of the switch either by using your

computer’s web browser and accessing the switch at its IP address or by installing the

ProSAFE®Plus Utility on your Windows-based computer.

If you use a Mac or a 64-bit Windows-based computer, you can use the NETGEAR Switch

Discovery Tool to discover the switch in your network and access the local browser–based

management interface of the switch.

You can also use the NETGEAR Insight mobile app on your smartphone to discover the

switch in your network.

For more information, see the following sections:

•Access the Switch Using a Web Browser on page 10

•Access the Switch With the ProSAFE Plus Utility on page 12

•Use the NETGEAR Switch Discovery Tool to Access the Switch on page 15

•Use the NETGEAR Insight Mobile App to Discover the Switch on page 16

Access the Switch Using a Web Browser

This manual describes the local browser–based management interface, referred to as

the local browser interface.

You can access and configure the switch directly through its local browser interface by

entering the IP address of the switch in the address bar of a browser. When you use the

local browser interface, the simplest way to configure the switch is not connected to

your network (off-network). You can also configure the switch with it connected to your

network, router, or modem, (on-network) but you must be able to determine the IP

address of the switch if your network uses DHCP.

Access a Switch That Is Connected to a Network

By default, the DHCP client of the switch is enabled. To access the switch, use the IP

address that the DHCP server assigned to the switch.

To determine the IP address of the switch, do one of the following:

•If you use a Windows-based computer, use the ProSAFE® Plus Utility to detect the

IP address (see Access the Switch With the ProSAFE Plus Utility on page 12). You

can also access and configure the switch from the utility.

User Manual10Get Started

Gigabit Ethernet Smart Managed Plus Switches

Otros manuales para ProSAFE GS105Ev2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de NETGEAR

NETGEAR

NETGEAR WFS709TP - ProSafe Smart Wireless Controller Manual de usuario

NETGEAR

NETGEAR GS108LP Manual de usuario

NETGEAR

NETGEAR Network Adapter 202-10248-01 Manual

NETGEAR

NETGEAR FS728TP-100NAS Manual de instrucciones

NETGEAR

NETGEAR ProSAFE M6100 XCM8944 Manual de usuario

NETGEAR

NETGEAR GSM7212 - ProSafe Switch Manual de usuario

NETGEAR

NETGEAR GS716T - ProSafe Switch Manual de usuario

NETGEAR

NETGEAR FS105 Manual de usuario

NETGEAR

NETGEAR ProSAFE JGS524Ev2 Manual de usuario

NETGEAR

NETGEAR FS108 - ProSafe 10/100 Desktop Switch Manual de usuario

NETGEAR

NETGEAR MBR1210-1BMCNS - This Product is a Special... Manual de usuario

NETGEAR

NETGEAR GS524T - ProSafe Switch Manual de usuario

NETGEAR

NETGEAR MS510TX Manual de usuario

NETGEAR

NETGEAR GS108Tv1 - Gigabit Smart Switch Manual

NETGEAR

NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable... Manual de usuario

NETGEAR

NETGEAR FS700TS Manual de usuario

NETGEAR

NETGEAR AG711F Manual de usuario

NETGEAR

NETGEAR ProSAFE M4300 series Manual de usuario

NETGEAR

NETGEAR GS305EP Manual de usuario

NETGEAR

NETGEAR GS104 Manual de usuario

NETGEAR

NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart... Manual de usuario

NETGEAR

NETGEAR ProSafe GS516TP Manual de usuario

NETGEAR

NETGEAR ProSAFE GS105Ev2 Manual de usuario

NETGEAR

NETGEAR FS108P - ProSafe Switch Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario