NETGEAR Home Router Manual de usuario

jË-ÖÍjÁ

.jÍÖ¬ËÖaj

Getting Started

The NETGEAR Smart Wizard Setup CD provides a

graphical step-by-step wizard that will assist you with

setting up your router.

Estimated completion time: about 20 minutes.

What do I do?

Simply put the Smart Wizard CD into your computer,

and follow the on screen instructions.

What’s on the CD?

The Smart Wizard Setup CD contains:

• A setup wizard

• A Setup Manual for your reference

•Tutorials

• Links to useful Web sites

• Bonus items

After the router is set up, how can

I change its configuration?

Simply open a browser and log in to the router at

http://www.routerlogin.net. The user name is admin

and the password is password, in lower case letters.

Remove the NETGEAR Smart Wizard Setup CD. Remove the router.

If you plan to stand the router up, attach its feet.

Become acquainted with the router status lights.

A. First, be sure your Internet connection is

active. Do not plug the router in yet.

B. Insert the NETGEAR Smart Wizard

Setup CD into your computer.

If the wizard screen does not appear, double

click autorun.exe on the CD. Apple Macintosh

users, double click setup.htm on the CD.

C. Next, click Setup.

Simply follow the on-screen instructions to set

up the router. When the setup is finished, go on

line to test your Internet connection.

3RZHU ,QWHUQHW /$1

7HVW

August 2004

NETGEAR is a registered trademark of NETGEAR, Inc. in the

United States and/or other countries.

Other brand and product names are trademarks or registered

trademarks of their respective holders. Information is subject to

change without notice.

I am an advanced user, can I

bypass the setup wizard?

To bypass the wizards, connect the router, log in from

a DHCP enabled (IP & DNS) computer at

http://www.routerlogin.net/basicsetting.htm with

the user name of admin and the password of

password, both in lower case letters.

Troubleshooting Tips

Here are some tips for correcting simple problems

you may have.

Once the router is connected, always

restart your network in this sequence:

1. Unplug and turn off the modem, turn off the

router, and shut down the computer.

2. Turn on the modem and wait two minutes.

3. Turn on the router and wait 1 minute.

4. Turn on the computer.

Make sure the cables are plugged in.

• The router Internet status light will be lit if the

Ethernet cable from the router to the modem is

plugged in securely and the modem and router

are turned on.

• For each powered on computer connected to the

router with an Ethernet cable, the corresponding

LAN status light will be lit. The label on the

bottom of the router identifies the number of each

LAN port.

Make sure the network settings of the

computer are correct.

Computers connected to the router must be configured

to obtain IP and DNS addresses automatically via

DHCP. For help with this, please see the tutorials on

the CD.

Check the router status lights to verify

correct router operation.

The Power light should turn solid green. If after 2

minutes it is not, reset the router as described in the

Setup Manual on the CD.

I don’t have a working CD drive.

Go to http://www.NETGEAR.com and download the

manual for your product from the support area of the

Web site. Follow the setup instructions in the manual.

Technical Support

Thank you for selecting NETGEAR products.

After completing the Smart Wizard configuration

assistant, locate the serial number on the bottom label

of your product and use it to register your product at

http://www.NETGEAR.com/register.

Registration on the web site or over the phone is

required before you can use our telephone support

service. The phone numbers for worldwide regional

customer support centers are on the Warranty and

Support Information card that came with your

product.

Go to http://kbserver.netgear.com for product

updates and web support.

Tabla de contenidos

Otros manuales de Enrutador de red de NETGEAR

NETGEAR

NETGEAR RAX45 Manual de usuario

NETGEAR

NETGEAR DGN2200v3 Manual de usuario

NETGEAR

NETGEAR Orbi Manual de usuario

NETGEAR

NETGEAR RP614 v4 Manual de referencia

NETGEAR

NETGEAR WGR614 v7 Guía del usuario

NETGEAR

NETGEAR RAX75 Manual de usuario

NETGEAR

NETGEAR R6250 Manual de usuario

NETGEAR

NETGEAR RAXE500 Manual de usuario

NETGEAR

NETGEAR WGR614 Manual de usuario

NETGEAR

NETGEAR RAXE300 Manual de usuario

NETGEAR

NETGEAR Orbi RBR40 Manual de usuario

NETGEAR

NETGEAR R6700AX Manual de usuario

NETGEAR

NETGEAR N300 Manual de usuario

NETGEAR

NETGEAR FS116P - ProSafe 16 Port 10/100 Desktop... Manual de usuario

NETGEAR

NETGEAR MCA1001v2 Manual de usuario

NETGEAR

NETGEAR AC1200 JR6100 Manual de usuario

NETGEAR

NETGEAR RM356 RM356 RM356 Manual de usuario

NETGEAR

NETGEAR MR1100EE Manual de usuario

NETGEAR

NETGEAR Nighthawk X4S R7800 Manual de usuario

NETGEAR

NETGEAR SXK50 Manual de usuario

NETGEAR

NETGEAR Nighthawk X4 Manual de usuario

NETGEAR

NETGEAR C6250 Manual de usuario

NETGEAR

NETGEAR ME101 - Wireless EN Bridge Network Converter Manual de usuario

NETGEAR

NETGEAR Orbi RBR20 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario