NetComm NB16WV Manual de usuario

NB16WV VOIP Setup

Guide

(for Internode)

Configuring yo u r NB16WV for VO I P Service

The following steps will take you through the process of setting up your VOIP connection.

Step 1: Checking Computer Net ork Settings:

You will need to connect your computer directly to your VOIP device (modem or ATA) and set

the network connection on your computer to obtain an IP address automatically. Please follow

the instructions appropriate for your operating system below:

Below are the instructions for setting Windows XP to obtain an IP address automatically for

your ethernet connection:

1. Click on the Start Menu and go to “Control Panel”.

2. Click on “Net ork Connections”.

(If you only see "Net ork and Internet Connections" open that first and then click on

"Net ork Connections".)

3. Right click on “Local Area Connection” and select “Properties”.

4. Double-click on “Internet Protocol”.

5. Select "Obtain an IP address automatically" and "Obtain DNS server

address automatically".

6. Click “OK” and then click “OK” (or “Close”).

Below are the instructions for setting Windows Vista to obtain an IP address automatically for

your ethernet connection:

1. Click on the Start Menu and go to “Control Panel”.

2. Click on “Net ork and Sharing Centre”.

(If you only see "Net ork and Internet" open that first and then click on "Net ork and

Sharing Centre".)

3. Click on “Manage net ork connections” (

on the lefthandside of the window

).

4. Right click on “Local Area Connection” and select “Properties”.

5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.

6. Select "Obtain an IP address automatically" and "Obtain DNS server

address automatically".

7. Click “OK” and then click “OK” again.

Below are the instructions for setting Windows 7 to obtain an IP address automatically for your

ethernet connection:

1. Click on the Start Menu and go to “Control Panel”.

2. Click on “Net ork and Sharing Centre”.

(If you only see "Net ork and Internet" open that first and then click on "Net ork and

Sharing Centre".)

3. Click on “Change adapter settings” (

on the lefthandside of the window

).

4. Right click on “Local Area Connection” and select “Properties”.

5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.

6. Select "Obtain an IP address automatically" and "Obtain DNS server

address automatically".

7. Click “OK” and then click “OK” again.

Below are the instructions for setting Mac OS X to obtain an IP address automatically for your

ethernet connection:

1. Click on the Apple Menu and go to "System Preferences".

2. Click on "Net ork".

3. Click on “Ethernet” or "Built-in Ethernet".

4. Click on the "Configure" drop-down box and select "Using DHCP" then click

"Apply".

Registrar sip.internode.on.net or as otherwise directed

by Internode.

Use Outbound Server Enable or Disable according to your VoIP

account type. If you are unsure consult

Internode.

Outbound Proxy sip.internode.on.net or as otherwise directed

by Internode.

Subscribe for MWI (Message Waiting Indicator) Enable or disable as per Internode’s

instructions (if the VoIP account has this

feature enabled).

Refresh Time for MWI Leave as default (360) or as per Internode’s

instructions.

MWI Server URL Leave as default or as directed by Internode.

5.

After entering all required fields click on the “Save” button and check the Status at the

bottom of the page. The status should change to “Registered” if all the settings entered

are correct and you have a current connection to the internet.

6. Check for a dial tone on your phone handset. The VoIP account should now be active and

you should now be able to make and/or receive VoIP phone calls (depending on the type

of VoIP account you are using).

Otros manuales para NB16WV

7

Tabla de contenidos

Otros manuales de Enrutador inalámbrico de NetComm

NetComm

NetComm NB12WD Manual de usuario

NetComm

NetComm NP740n Manual de usuario

NetComm

NetComm NB6W Manual de usuario

NetComm

NetComm NTC-140-02 Manual de usuario

NetComm

NetComm NP644 Manual de usuario

NetComm

NetComm 3G15Wn Manual de usuario

NetComm

NetComm N3G002W Manual de usuario

NetComm

NetComm 3G27WV-R Manual de usuario

NetComm

NetComm NB16DG Manual de usuario

NetComm

NetComm NTC-140W Series Manual de usuario

NetComm

NetComm LIBERTY SERIES Manual de usuario

NetComm

NetComm NB9WMAXX Guía de inicio rápido

NetComm

NetComm NB8W Manual de usuario

NetComm

NetComm LIBERTY MyZone 3G24W Manual de usuario

NetComm

NetComm N300 GATEWAY SERIES Manual de usuario

NetComm

NetComm 3G27WV-02 Manual de usuario

NetComm

NetComm N3G001W Manual de usuario

NetComm

NetComm NF1901ACV Manual de usuario

NetComm

NetComm 3GM1WN Manual operacional

NetComm

NetComm VELOCITY NP805N Manual operacional

NetComm

NetComm N150 Manual de usuario

NetComm

NetComm 3G39W-I Manual de usuario

NetComm

NetComm N3G001W Manual de usuario

NetComm

NetComm NB604 Manual de usuario

Manuales populares de Enrutador inalámbrico de otras marcas

Milesight

Milesight UG67 Manual de usuario

Airlogic

Airlogic AirSync Class 1 Manual del propietario

Samsung

Samsung WCH730B Manual de usuario

TELEFONICA

TELEFONICA USB Adapter Manual de usuario

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manual de usuario

Askey

Askey RAC2V1K Manual de usuario

Alloy

Alloy WLF2454AP-S Manual de usuario

TP-Link

TP-Link TL-WR542G Manual de usuario

NETGEAR

NETGEAR WNR2000v4 Manual de usuario

Hama

Hama 53120 Manual de usuario

Intellinet

Intellinet 524582 Manual de usuario

Asus

Asus RT-N10P Manual de usuario

D-Link

D-Link DIR-506L Manual de usuario

Sapido

Sapido GR297n Manual de usuario

Asus

Asus DSL-N55U Manual de usuario

AMTC

AMTC WR7502 Manual de usuario

Compaq

Compaq CP-2W - iPAQ Connection Point Manual de usuario

SMC Networks

SMC Networks WBR14-N2 FICHE Manual de usuario