NetComm FIBRE NF3ADV Manual de usuario
NetCommWireless
QUICK START GUIDE
NetComm
Wireless
NF3ADV
N900 Dual Band WiFi
Gigabit Modem Router
NetComm
Wireless
THANKS FOR PURCHASING NETCOMM WIRELESS
This quick start guide is designed to get you up and running quickly with your new router. For
more advanced setup instructions, refer to the user manual which can be downloaded from
the NetComm Wireless website at www.netcommwireless.com
CONNECTING THE GATEWAY
1. Align the holes on the base of the gateway with the securing pins on the gateway stand
as illustrated below and push the gateway into the stand so that the securing pins lock
into place.
2. Connect the supplied yellow Ethernet cable to one of the yellow Ethernet ports on the
back of the gateway and the other end to the network adapter on your computer.
3. Connect the supplied RJ-11 cable to the DSL port on the back of the gateway and the
other end to the wall port that provides your ADSL service.
4. Connect the supplied AC Power adapter to the power jack on the back of the gateway
and to the wall socket then press the ON/OFF button.
N900 Dual Band WiFi Gigabit Modem Router - NF3ADV
LOGGING INTO THE
WEB INTERFACE
1. Open a web browser (for example,
Mozilla Firefox, Google Chrome, or
Microsoft Internet Explorer) and type
http://192.168.1.1 into the address
bar and press Enter. The login screen
is displayed.
2. Enter admin into both the username and
password elds and click Login. The
First-time Setup Wizard is displayed.
3. Click the Yes, let’s get started with the
wizard button to begin conguring
the gateway.
4. To setup your ADSL service, use the
WAN Type drop down list to select the
ADSL connection type. Your service
provider should be able to give you this
information. If you are unsure, select PPP
over Ethernet. Enter the username and
password of your ADSL account and
click Next.
Note: For 3G/4G or NBN/Fibre connections please consult the
User Guide for setup instructions .
5. To congure a wireless network, set the
Wireless 2.4GHz (WiFi) option to On.
The SSID Broadcast option enables or
disables the gateway from showing the
wireless network name when a scan is
performed by wireless devices. In the
SSID Broadcast Name eld, enter the
wireless network name that you would
like to use. This may be a maximum of
32 characters. Click the Next button
to continue.
6. Use the Security Key Type drop down
list to select the type of wireless security
you would like to use. If you are unsure,
select WPA-PSK / WPA2-PSK. In the
Security Key eld, enter the password
you would like to use for wireless devices
to join your wireless network. This may
be a maximum of 8 characters. Click
the Next button to continue.
7. Steps 4and 5of the wizard are the same
as steps 2and 3but for the 5GHz WiFi
network. Enter the details for the 5GHz
wireless network and click Next.
NetComm
Wireless
8. Step 6of the wizard prompts you to
congure the username and password
used to log in to the gateway. We
highly recommend changing the default
username and password of the gateway
for security reasons.
In the
Desired
Username
eld, enter the username
you would like to use. In the Desired
Password and
Retype Password
elds,
enter the password that you would like to
use. Click the
Next
button to continue.
Note: Remember to write down the username and password
that you configure.
9. The wizard displays a summary of the
settings that you congured. Click the
Finish button to complete the wizard.
CONNECTING VIA WIFI
You can connect multiple computers,
laptops, tablets and smartphones to your
gateway’s wireless networks by performing
the following steps. Note that the gateway
has both a 2.4GHz and a 5GHz wireless
network. The network that you connect to
is congured on your wireless device and is
subject to the device’s compatibility.
1. Using your wireless device, perform a
scan for wireless networks and select
the wireless network name listed on
the included Wireless Security Card.
If you changed the SSID Broadcast
Name using the Setup Wizard, select the
wireless network displaying the name
that you entered.
2. Enter the wireless security key listed
on the included Wireless Security Card
and click Connect. If you changed the
wireless security password using the
Setup Wizard, enter the new password
you congured with the Wizard.
3. Wait approximately 30 seconds for the
connection to establish.
Your NetComm Wireless Dual Band
WiFi Data and VoIP Gateway is now
ready to use.
YML-NF3ADV-V7
Otros manuales para FIBRE NF3ADV
3
Tabla de contenidos
Otros manuales de Enrutador inalámbrico de NetComm
NetComm
NetComm NF7 Manual de usuario
NetComm
NetComm FIBRE NF3ADV Manual de usuario
NetComm
NetComm MyZone Manual de usuario
NetComm
NetComm NWL-25 Manual de usuario
NetComm
NetComm NB504 Manual de usuario
NetComm
NetComm LIBERTY SERIES Manual de usuario
NetComm
NetComm 3GM1WN Manual operacional
NetComm
NetComm NB304 Manual de usuario
NetComm
NetComm NB12WD Manual de usuario
NetComm
NetComm NB5580W Manual de usuario
NetComm
NetComm NB16WV Manual de usuario
NetComm
NetComm HSPA+ M2M Manual de usuario
NetComm
NetComm NB304N Manual de usuario
NetComm
NetComm HS1200N Manual de usuario
NetComm
NetComm NB604N Manual de usuario
NetComm
NetComm NB604N Manual de usuario
NetComm
NetComm 3G27WV-02 Manual de usuario
NetComm
NetComm 4G100W-01 Manual de usuario
NetComm
NetComm NetComm Gateway Series Manual de usuario
NetComm
NetComm NB16WV Manual de usuario
