NetComm Wireless NP124 Manual de usuario

What to do if you cannot open the configuration page

(NP124)

What to do if you cannot open the configuration page of the NP124

If the NP124 has been previously configured, the DHCP would be disabled and you would not be able to open

the configuration page http://192.168.20.1 automatically. This guide will take you through the steps to allow

you to open the configuration page when that happens. There are two ways of allowing you access to the

configuration page: Reset the NP124 or Set a static IP address on your computer. Ensure that your computer

is connected to the Ethernet port of the NP124 before you proceed with the guide.

Resetting the NP124

1. Ensure that the NP124 is powered on.

2. There is a reset pinhole at the side of the NP124. Use a paper clip and press inside for 15 seconds.

3. The default settings will be restored where the DHCP would be enabled. You would then be able to

navigate to http://192.168.20.1 in a web browser.

Setting a static IP address on your computer

Refer to this image for Windows Computers

Below are the instructions for setting Windows XP to set a static IP address for your ethernet connection:

1. Click on the Start Menu, and go to “Control Panel”.

2. Click on “Network Connections”.

(If you only see "Network and Internet Connections", open that first, and then click on "Network

Connections".)

3. Right click on “Local Area Connection” and select “Properties”.

4. Double-click on “Internet Protocol”.

5. Select "Use the following IP address ".

6. Type in the following information

IP address: 192.168.20.100

Subnet mask: 255.255.255.0

Default gateway: 192.168.20.1

7. Click “OK”, and then click “OK”(or “Close”).

Below are the instructions for setting Windows Vista to obtain an IP address automatically for your ethernet

connection:

1. Click on the Start Menu, and go to “Control Panel”.

2. Click on “Network and Sharing Centre”.

(If you only see "Network and Internet", open that first, and then click on "Network and Sharing Centre".)

3. Click on “Manage network connections” (on the lefthandside of the window).

4. Right click on “Local Area Connection” and select “Properties”.

5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.

6. Select "Use the following IP address ".

7. Type in the following information

IP address: 192.168.20.100

Subnet mask: 255.255.255.0

Default gateway: 192.168.20.1

8. Click “OK”, and then click “OK”(or “Close”).

Below are the instructions for setting Windows 7 to obtain an IP address automatically for your ethernet

connection:

1. Click on the Start Menu, and go to “Control Panel”.

2. Click on “Network and Sharing Centre”.

(If you only see "Network and Internet", open that first, and then click on "Network and Sharing Centre".)

3. Click on “Change adapter settings” (on the lefthandside of the window).

4. Right click on “Local Area Connection”and select “Properties”.

5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.

6. Select "Use the following IP address ".

7. Type in the following information

IP address: 192.168.20.100

Subnet mask: 255.255.255.0

Default gateway: 192.168.20.1

8. Click “OK”, and then click “OK”(or “Close”).

Refer to this image for Mac OS X Computers

Below are the instructions for setting Mac OS X to obtain an IP address automatically for your ethernet

connection:

1. Click on the Apple Menu, and go to "System Preferences".

2. Click on "Network".

3. Click on “Ethernet” or "Built-in Ethernet".

4. Click on the "Configure"drop-down box, and select "Manually”

5. Type in the following information

IP Address: 192.168.20.100

Subnet Mask: 255.255.255.0

Router: 192.168.20.1

6. Click “Apply”.

Note: If you are still unable to open the configuration page, try a different web browser (i.e. Google

Chrome, Mozilla Firefox, etc.) or a different computer.

Tabla de contenidos

Otros manuales de Enrutador de red de NetComm Wireless

NetComm Wireless

NetComm Wireless NF1ADV Manual de usuario

NetComm Wireless

NetComm Wireless NB16DG Manual de instrucciones

NetComm Wireless

NetComm Wireless NWL-12 Series Manual de usuario

NetComm Wireless

NetComm Wireless NTC-6908 Instrucciones de instalación

NetComm Wireless

NetComm Wireless NTC-140W Manual de usuario

NetComm Wireless

NetComm Wireless NB16DG Manual de instrucciones

NetComm Wireless

NetComm Wireless NF10WV Manual de usuario

NetComm Wireless

NetComm Wireless NB16DG Manual de instrucciones

NetComm Wireless

NetComm Wireless NF18ACV Manual de usuario

NetComm Wireless

NetComm Wireless NB304n Manual de usuario

NetComm Wireless

NetComm Wireless NWL-25 Guía de inicio rápido

NetComm Wireless

NetComm Wireless NF10WV Manual de usuario

NetComm Wireless

NetComm Wireless NTC-6200-01 Manual de usuario

NetComm Wireless

NetComm Wireless NF10W Manual de usuario

NetComm Wireless

NetComm Wireless NTC-140-01 Manual de usuario

NetComm Wireless

NetComm Wireless NB16DG Manual de usuario

NetComm Wireless

NetComm Wireless NTC-400 Series Manual de usuario

NetComm Wireless

NetComm Wireless 3G29WN2 Manual de usuario

NetComm Wireless

NetComm Wireless WSG-NF5 Manual de usuario

NetComm Wireless

NetComm Wireless NTC-220 Series Manual de usuario

NetComm Wireless

NetComm Wireless NB304n Manual de usuario

NetComm Wireless

NetComm Wireless NTC-225 Manual de usuario

NetComm Wireless

NetComm Wireless NTC-221 Manual de usuario

NetComm Wireless

NetComm Wireless NF15ACV Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad