If you are using fixed or manual iris lens, set AES mode to control Exposure
with the electronic shutter.
A.I AES
A.I AES If you are using an auto iris lens, set A.I mode, the shutter speed is fixed to
1/50 second.
FLOFF If camera is installed into different frequency, the flickerless function will
reduce the flicker of video. The shutter is 1/120.
Super AGC and Normal AGC Adjusting
Auto Iris , AES and Flicferless Function Adjusting
SAGC NAGC If you install the camera at low lux environment, please switch to SAGC
, it will increase the camera sensitivity.
The factory default setting is SAGC.
OFF BLC The combination of two types Backlight makes it easier to arrange Backlight
combination to match the imaging conditions and installation location.
Day and Night Adjusting
OFF The smart day and night mechanical filter removable allows changing between
color and monochrome mode, and user could define the filter to work correctly
during day time (visible light) and night time (invisible light).
DN ON
Note: The D/N should be at “ON” position and make sure the AGC at SAGC position
. If the switch is at NAGC, the filter will be stayed at day time position.
Sense UP Adjusting
ENS-UP OFF Sense up stand for frame integration that is useful for the low iux environment
, the default sense up rate is 4x similar 1/15 sec.
DAY AND NIGHT MECHANICAL FILTER REMOVABLE
DIGITAL NOISE REDUCTION COLOR VIDEO CAMERA
The digital noise reduction technology is built into the camera to eliminate any noise associated
with low night environment. Ghost and blooming effects are reduced dramatically, leaving the
Image clean and vivid.
The smart day and night mechanical filter removable allows changing between color monochrome
Mode, and user could define the filter to work correctly during day time and night time (invisible
light). And the infrared light sensing responses wavelength of invisible light from 700 to 1100nm.
CAMERA FUNCTIONS
4
