Neopost SI60 Manual de usuario
1
4103241J-1/A
4103980D/A
28/05/2001
INTRODUCTION
This folder-inserter Neopost SI60 is designed to fold your
documents, insert them into envelopes and seal the envelopes.
Smallsizedocumentsmaybeinsertedalone,withoutbeingfolded.
They may also be added to larger folded documents.
The machine operation is automatic, quick and user-friendly.
The folder-inserter can be used to send very quickly invoices,
mailshots, payrolls, daily mail, etc.
Theinformationprovidedinthismanualwillhelpyoutooptimize
the functioning and output of your machine.
Following are the folder-inserter main characteristics:
- one or two automatic feeders (at option) for large documents
(mostly A4 or “US letter” sizes),
- uptotwoautomaticfeeders(dependingon the model)forsmall
size documents (inserts smaller than the main envelopes),
- one document manual feeder,
- very high capacity of automatic feeders providing a great
machine autonomy and a significant hourly rate,
- the possibility of inserting documents into envelopes of various
sizesincludingC6/5,C5,#10.6x9",withorwithoutawindow,
2
4103241J-2/A
4103980D/A
28/05/2001
- thepossibilityofinsertingintothesame envelope various sheets
fromthesamefeeder,suchasinvoicesprintedonseveralsheets,
- themachineadjustmentsstoredintheformofjobs,sothattheuser
workingenvironmentcanbeimmediatelyretrieved,
- the automatic adjustment of the folding dimensions,
- an adjustment assistance in the form of a simple and interactive
control panel,
- the automatic detection of double documents on the automatic
feeders,
- the automatic detection of double documents, based on the
principleofelectronicmeasurementofthethicknessinsensitiveto
thepaperopaqueness,
- theeasyfeedingofthefeedersandsimplejamclearingoperations,
- a jam clearing assistance based on the control panel and the
softwarefunctions,
- compactnessandanappearancethatfitseasilyinwiththeoffice
environment.
3
4103241J-3/A
4103980D/A
28/05/2001
Neopostactivity
Neopost Company ranks among the worldwide leaders in the
supply of equipment and services related to mail processing.
Neopost is chiefly present in two market niches, namely:
- Mailfrankingaccountingforapproximately70%ofthecompany’s
turnover,includestheengineering,manufactureandmarketing
of franking systems, post office scales, as well as the supply of
otherrelatedservices.
- Documenthandlingandparcelsendingincludingtheengineering,
manufacture and marketing of equipment such as folders/
inserters,letterextractors,softwareprogramsandparcelsending
systems,aswellasthesaleofsuppliesandservicesinconnection
withsuchequipment.
This manual cannot be reproduced, registered or transmitted by
any electronic, mechanical or other means, partly or wholly,
without Neopost prior consent.
Copyright© Neopost 2000
4
4103241J-4/A
4103980D/A
28/05/2001
STANDARD
In order to comply with standards EN60950 and UL1950, this
equipment must be connected to standard installations of the
construction industry. As regards the protection of the internal
wiring, a two-pole protection is required against 5 Amp. current
surges.ThisequipmentisinaccordancewithstandardEN55022,
Class A, EN55024, and FCC part 15.
INSTALLATION
Theequipmentshouldbeinstalledveryclosetoagroundedmains
outlet easy of access and protected by a 16 Amp. fuse.
CAUTION
YOUMUST BYNO WAYTRY TOREMOVE THEMACHINE
COVERS SINCE THEY PROTECT THE ENERGIZED
COMPONENTS.
5
4103241J-5/A
4103980D/A
28/05/2001
TABLE OF CONTENTS
SECTION A: GENERAL PRESENTATION ....... 9
1. MACHINE .............................................................11
2. CONTROL PANEL .................................................. 12
3 OPENING THE MACHINE ...................................... 16
4 INSIDE VIEW.........................................................17
SECTION B : PRACTICAL FUNCTIONS....... 19
1. INSTALLATION AND PUTTING INTO SERVICE ..........21
1.1 Installation of the feeders ....................................21
1.2 Removal of the feeders........................................23
1.3 Filling the tank ..................................................23
1.4 Putting into service ............................................. 23
1.4.1User mode (access) .......................................25
1.4.2Language selection ........................................ 25
1.4.3Maintenance ................................................25
1.4.4Servicing mode (access) ................................ 25
1.4.5Supervisor mode ...........................................26
2. OPERATION.......................................................... 27
2.1 User mode ........................................................28
2.1.1Quick access job .......................................... 28
2.1.2Selection of a stored job ................................29
2.1.3Job check .................................................... 30
2.1.4 Starting the job ............................................ 31
6
4103241J-6/A
4103980D/A
28/05/2001
2.1.5Modification of a job.....................................31
2.1.6Creation of a job ..........................................32
2.1.7Counters ......................................................32
2.1.8Countdown counter ....................................... 33
2.2 Supervisor mode................................................ 34
2.2.1Length of flap moistening................................ 34
2.2.2Adjustment of the document alignment (feeders B
and C)......................................................... 35
2.3 Position of the address and adjustment of the folds..35
2.3.1Position of the address ................................... 35
2.3.2Adjustment of the folds ...................................35
2.4 Detection of double documents ............................36
2.4.1General remarks ........................................... 36
2.4.2Enabling and disabling the double document
detection......................................................36
3. DOCUMENT FEEDING............................................37
3.1 Document feeding in the manual mode (feeder A)... 37
3.2 Document feeding in the automatic mode (feeders B
and C) .............................................................37
3.3 Envelope feeding (feeder E)................................. 39
3.4 Feeding of inserts and reply envelopes (feeder F).... 41
3.5 Feeding of inserts and reply envelopes (feeder D) ... 44
SECTION C: ASSISTANCE AND
RECOMMENDATIONS.......................... 49
1. TROUBLE SHOOTING ............................................51
2. JAM CLEARING..................................................... 59
2.1 Document Path ..................................................59
2.2 Envelope path ................................................... 61
2.3 Insert path......................................................... 63
2.4 Inserting area .................................................... 66
7
4103241J-7/A
4103980D/A
28/05/2001
3 CLEANING............................................................69
3.1 Cleaning of the rollers ........................................ 69
3.1.1Cleaning Procedure ....................................... 71
3.1.2Drying......................................................... 76
3.2 Cleaning of the casing........................................ 77
SPECIFICATIONS ..................................... 78
8
4103241J-8/A
4103980D/A
28/05/2001
Symbolsused
Indicates an essential piece of information that
shouldnotbe overlooked.
Signals a delicate issue.
Indicates an interesting idea or a tip.
Illustrationthroughanexample.
9
4103241J-9/A
4103980D/A
28/05/2001
SECTION A: GENERAL PRESENTATION
1. MACHINE .........................................................11
2. CONTROL PANEL ...............................................12
3 OPENING THE MACHINE ....................................16
4 INSIDE VIEW .....................................................17
10
4103241J-10/A
4103980D/A
28/05/2001
Generalpresentation
20 22 421 5
detail of the rear view
6
7
8
9
10111213141516
17
18
19
Tabla de contenidos
Otros manuales de Máquina plegadora de Neopost
Neopost
Neopost PF-55 Manual de usuario
Neopost
Neopost SI 72 Manual de usuario
Neopost
Neopost Carat Prisma Manual de usuario
Neopost
Neopost SI30 Manual de usuario
Neopost
Neopost PF-90 Manual
Neopost
Neopost PF-75 Manual de usuario
Neopost
Neopost DS-75 Manual de usuario
Neopost
Neopost DS-85 Manual de usuario
Neopost
Neopost PF-45A Manual de usuario
Manuales populares de Máquina plegadora de otras marcas
Mathias Bauerle
Mathias Bauerle Multipli 35 Manual de usuario
Intelli-Fold
Intelli-Fold DF-304C Manual de usuario
Pitney Bowes
Pitney Bowes DI425 FastPac Manual
Hwasung
Hwasung COMPODIS HMK-830 Series Manual de usuario
KRUG+PRIESTER
KRUG+PRIESTER IDEAL 8306 Manual de usuario
XPOtool
XPOtool 61574 Manual de usuario
