NEC Flash Memory Programmer PG-FP3 Manual de usuario
User’s Manual
PG-FP3
Flash Memory Programmer
1991©
Printed in Japan
Document No. U13502EJ2V0UM00 (2nd edition)
Date Published July 1999 J CP(K)
1998
User's Manual U13502EJ2V0UM00
2
[MEMO]
User's Manual U13502EJ2V0UM00 3
SUMMARY OF CONTENTS
CHAPTER 1 GENERAL .....................................................................................................................................................17
CHAPTER 2 CONFIGURATION.........................................................................................................................................19
CHAPTER 3 STARTING AND STOPPING ........................................................................................................................27
CHAPTER 4 BASIC OPERATING PROCEDURE..............................................................................................................37
CHAPTER 5 COMMAND REFERENCE.............................................................................................................................45
CHAPTER 6 STAND-ALONE FUNCTION .........................................................................................................................67
CHAPTER 7 HARDWARE SPECIFICATIONS...................................................................................................................69
CHAPTER 8 ERROR MESSAGES AND REMEDIAL ACTIONS .......................................................................................87
APPENDIX A NOTES ON DESIGNING A TARGET............................................................................................................91
APPENDIX B REVISION HISTORY.....................................................................................................................................93
User's Manual U13502EJ2V0UM00
4
EEPROM is a trademark of NEC Corporation.
PC/AT is a trademark of International Business Machines Corporation.
Windows and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
Pentium is a trademark of Intel Corporation in the United States.
User's Manual U13502EJ2V0UM00 5
• The information in this document is subject to change without notice. Before using this document,
please confirm that this is the latest version.
• No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.
• NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a device described herein or any other liability arising
from use of such device. No license, either express, implied or otherwise, is granted under any patents,
copyrights or other intellectual property rights of NEC Corporation or of others.
• Descriptions of circuits, software, and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these circuits,
software, and information in the design of the customer's equipment shall be done under the full responsibility
of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third
parties arising from the use of these circuits, software, and information.
M7A 98.8
User's Manual U13502EJ2V0UM00
6
Regional Information
Some information contained in this document may vary from country to country. Before using any NEC
product in your application, pIease contact the NEC office in your country to obtain a list of authorized
representatives and distributors. They will verify:
•
Device availability
•
Ordering information
•
Product release schedule
•
Availability of related technical literature
•
Development environment specifications (for example, specifications for third-party tools and
components, host computers, power plugs, AC supply voltages, and so forth)
•
Network requirements
In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary
from country to country.
NEC Electronics Inc. (U.S.)
Santa Clara, California
Tel: 408-588-6000
800-366-9782
Fax: 408-588-6130
800-729-9288
NEC Electronics (Germany) GmbH
Duesseldorf, Germany
Tel: 0211-65 03 02
Fax: 0211-65 03 490
NEC Electronics (UK) Ltd.
Milton Keynes, UK
Tel: 01908-691-133
Fax: 01908-670-290
NEC Electronics Italiana s.r.l.
Milano, Italy
Tel: 02-66 75 41
Fax: 02-66 75 42 99
NEC Electronics (Germany) GmbH
Benelux Office
Eindhoven, The Netherlands
Tel: 040-2445845
Fax: 040-2444580
NEC Electronics (France) S.A.
Velizy-Villacoublay, France
Tel: 01-30-67 58 00
Fax: 01-30-67 58 99
NEC Electronics (France) S.A.
Spain Office
Madrid, Spain
Tel: 91-504-2787
Fax: 91-504-2860
NEC Electronics (Germany) GmbH
Scandinavia Office
Taeby, Sweden
Tel: 08-63 80 820
Fax: 08-63 80 388
NEC Electronics Hong Kong Ltd.
Hong Kong
Tel: 2886-9318
Fax: 2886-9022/9044
NEC Electronics Hong Kong Ltd.
Seoul Branch
Seoul, Korea
Tel: 02-528-0303
Fax: 02-528-4411
NEC Electronics Singapore Pte. Ltd.
United Square, Singapore 1130
Tel: 65-253-8311
Fax: 65-250-3583
NEC Electronics Taiwan Ltd.
Taipei, Taiwan
Tel: 02-2719-2377
Fax: 02-2719-5951
NEC do Brasil S.A.
Electron Devices Division
Rodovia Presidente Dutra, Km 214
07210-902-Guarulhos-SP Brasil
Tel: 55-11-6465-6810
Fax: 55-11-6465-6829
J99.1
User's Manual U13502EJ2V0UM00 7
Major Revisions in This Edition
Page Description
p.18 The setting of the baud rate and the capacity for downloading the user program in Table 1-1 have been
changed.
p.19 Figure 2-1 has been changed.
p.20 Figure 2-2 has been changed.
p.20 The description of EXPANSION CONNECTOR has been deleted from Section 2.2.
p.28 A description in Section 3.1 has been changed.
p.30 A description in Section 3.2 has been changed.
p.36 A description has been added to "Option setting" in Section 3.3.
p.46 A description has been added to Section 5.1.2.
p.50 A description in Section 5.2.2 has been changed.
p.58 A description in Section 5.3.2 has been changed.
p.59 A description in Section 5.3.3 has been changed.
p.61 A description in Section 5.3.4 has been changed.
p.62 A description in Section 5.3.5 has been changed and Caution has been added to Section 5.3.5.
p.62 A description in Section 5.3.6 has been changed.
p.65 A description in Section 5.4.3 has been changed.
p.72 A description in "Supported ROM specifications" in Section 7.2 has been changed.
p.73 A description has been deleted from Section 7.3.
p.77 The setting of the baud rate in Table 7-4 has been changed.
p.91 Figure A-1 has been changed.
p.92 Figure A-2 has been changed.
p.93 Appendix B has been added.
p.41 in the
first edition Section 5.3.2 has been deleted.
p.46 in the
first edition Section 5.3.7 has been deleted.
p.53 in the
first edition Section 5.4.6 has been deleted.
p.75 in the
first edition Section 7.5 has been deleted.
The mark shows major revised points.
User's Manual U13502EJ2V0UM00
8
[MEMO]
User's Manual U13502EJ2V0UM00 9
PREFACE
Readers of This Manual This manual is intended for user engineers who use the PG-FP3 to design and develop
systems with an NEC microcontroller with flash memory.
Purpose The PG-FP3 enables programs in the NEC microcontroller with flash memory to be
erased, written, or verified with the microcontroller mounted on a user-designed printed
circuit board through simple operations on a WindowsTM screen.
This manual contains the basic PG-FP3 specifications and explains how to use the
PG-FP3.
Organization This manual contains the following chapters:
General, Configuration, Starting and Stopping, Basic Operating Procedure, Command
Reference, Stand-alone Function, Hardware Specifications, and Error Messages and
Remedial Actions
How to Read This Manual To understand the basic specifications and operation of the PG-FP3, read this manual
in the order given in the table of contents. Be sure to read Chapter 3, which contains
important information on operating the PG-FP3.
It is assumed that the readers of this manual have a basic knowledge of electricity,
logic circuits, and microcontrollers. It is also assumed that, especially in the
description of applications, they have sufficient knowledge of Windows. For
information on using Windows 95 and Windows NTTM and for the related terminology,
refer to the appropriate Windows manual.
Legend Note : Explanation of the item so marked
Caution : Important information
Remark : Supplementary explanation
Numeric notation : Binary..............×××× or ××××B
Decimal ...........××××
Hexadecimal....0××××H or ××××H
User's Manual U13502EJ2V0UM00
10
Terminology PG-FP3 ................................... Flash memory programmer
FLASHPRO3 ........................... Windows application name of PG-FP3
Target ...................................... NEC microcontroller with flash memory or user board
on which such a microcontroller is mounted
Printer interface (IEEE 1284) ... Parallel interface specified by IEEE 1284-1994. Used
by the PG-FP3 as one of the host interfaces.
FA adapter ............................... Adapter board used to write programs to an NEC
microcontroller with flash memoryNote
Note The FA adapter board is a product of Naito Densei Machida Mfg. Co., Ltd.
<Telephone number>
Naito Densei Machida Mfg. Co., Ltd.: 044-822-3813
Tabla de contenidos
Otros manuales de Hardware de red de NEC
NEC
NEC 200 Manual de usuario
NEC
NEC P401-TMX4D Manual de usuario
NEC
NEC Univerge SV8100 Guía del usuario
NEC
NEC NRS Expanded Series Manual de usuario
NEC
NEC UX5000 Manual de usuario
NEC
NEC NVM Series Manual de usuario
NEC
NEC N8151-34A Manual de usuario
NEC
NEC HS3-40 Manual de usuario
NEC
NEC N8151-50 Manual de usuario
NEC
NEC Univerge SV8100 Manual de usuario
NEC
NEC SIGMABLADE N8406-019 Manual de usuario
NEC
NEC NEAX 2400 IPX Manual de usuario
NEC
NEC NE3203-153 Manual de usuario
NEC
NEC NP01LM Series Manual de usuario
NEC
NEC N8151-51A Guía de inicio rápido
NEC
NEC P/N 0893416 Manual de usuario
NEC
NEC IP8800/S2400 Series Manual de usuario
NEC
NEC N8146-28 Manual de usuario
NEC
NEC A201NE Manual de usuario
NEC
NEC ZB78K0/KF1+CC Manual de usuario
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
