NEC Conference Max Manual de usuario

To Connect NEC Conference Max

1. Connect the Cat. 5 cable from the Link Out jack on the base unit to the Link In

jack on the conferencing pod.

2. Connect the base unit to the telephone jack using the RJ-11 telephone cable.

3. Connect the power cord to the base unit and plug the power cord into an

electrical outlet.

To Connect Additional Units

1. Connect the 12' Cat. 5 cable to the Link Out jack on the first phone and the

Link In jack on the second phone.

2. Continue linking up to three additional NEC Conference Max phones in the

same fashion. A total of four units may be connected.

CONFERENCE PHONE SETUP

Guide

To Access the Programming Menus

Press and hold until appears on the LCD screen. Then press the key that

corresponds with the desired menu option and follow the instructions below.

PROGRAMMING OPTIONS

NEC Conference Max

Audio Conferencing

*Press and hold the "1" key to enter a hyphen or the "*" key to enter a space in the number. If a number has already

been programmed, use CLEAR to delete the old number before entering the new number.

Ringer Melody 1

Dialing Mode

Flash Duration 3

Local Number* 4

Conference* 5

Service* 6

Key ProgrammingMenu Option

1-5 to select a new melody. Press to save selection.

Press . The current melody selection ﬂashes. Press

1 for tone, 2 for pulse. Press to save selection.

Press . The current dialing selection ﬂashes. Press

Press . Enter the phone number that you want the

Conference key to dial. Press to save the number.

duration. 1 = 600ms, 2 = 300ms, 3 = 150ms, 4 = 100ms, 5 = 80ms.

Press . The current duration ﬂashes. Press 1-5 to select

Press to save selection.

appear on the LCD screen when the phone is in standby.

Press . Enter the phone number that you want to

Press to save selection.

Press . Enter the phone number that you want the

0key to dial. Press to save the number.

Country 7Press . Press the number key that corresponds with the

desired country. 1 = US/Canada/China/Japan/Mexico/Singapore,

2 = Europe CTR 21, 3 = Australia, 4 = S. Africa, 5 = Brazil, 6 = New Zealand,

7 = South Korea. Press to save the country setting.

Press CLEAR once to return to the previous menu level or hold to exit Programming mode

without saving changes.

CAUTION: Read the Safety Information in the user manual.

25' Cat. 5 cable

RJ-11

telephone

cable

To Link In

To Link Out

Rear of conferencing pod

Rear of base unit

12' Cat. 5 cable

From Link Out

To Link In

To Link Out on Base Unit

25' Cat. 5 cable

permission from NEC. NEC reserves specific privileges. Information in this document is subject to change without notice.

NEC Conference Max is protected by U.S. Patent No. D499,392 Part No. 800-157-251 (Rev. BETA)

NEC Conference Max

Icon Description

Phone Program

Mute

Phonebook

Ringer Off

Scroll

Icon Description

Getting Started Guide

To Make a Call

1. Press the ON/OFF key to activate

the phone. You will hear a dial tone.

2. Dial the number as you would on a

standard phone. The number appears

on the LCD screen.

You can also predial the number

while in Standby mode and press the

ON/OFF key to connect the call.

To add a pause to the number you

are predialing, press and hold the

pound (#) key.

To Answer a Call

•Press the ON/OFF key.

When there is an incoming call, the

phone rings (unless the ringer is

turned off) and the phone LEDs and

phone icon on the LCD screen flash.

To End a Call

• Press the ON/OFF key.

To Adjust Ringer Volume

•While the phone is ringing, press

VOLUME UP or VOLUME DOWN.

• While the phone is inactive, press

VOLUME UP or VOLUME DOWN.The

ringer melody will play once at the

new level.

To Turn the Ringer On/Off (In Standby)

• Press and hold the star key (*).

To Access Your Conferencing Service

• Press the CONFERENCE key. This

feature must be programmed before

use.

To Store a Number in the Phonebook

1. Enter the number while phone is in

standby (inactive) mode.

To add a pause to the phone

number, press and hold the pound

(#) key. To add a dash to the phone

number, press and hold the 1 key.

To add a space to the phone number,

press and hold the star key (*).

2. Press and hold the PHONEBOOK key

until the Phonebook and Program

icons appear.

3. Assign a Phonebook location (0–9)

by pressing the corresponding

number key.

4. Press PHONEBOOK again to save the

entry. You will hear a confirmation

tone.

5. To exit Phonebook Edit mode before

saving the entry, press CLEAR.

To Make a Call Using the Phonebook

1. Press the PHONEBOOK key.

2. Press the number (0-9) that

corresponds with the stored phone

number you want to dial. The number

will be displayed on the LCD screen.

3. Press the ON/OFF key to dial the

number.

The phone icon appears when the phone is

active.

The Phonebook and Program icons.

Ringer off icon.

USING THE PHONE

KEYPAD FUNCTIONS

LCD DISPLAY

Otros manuales de Sistema de conferencias de NEC

NEC

NEC Univerge SV9100 Manual de usuario

NEC

NEC UNIVERGE SL2100 Manual de usuario

NEC

NEC Aspila Topaz Manual del propietario

NEC

NEC Univerge SV9100 Hoja de información del producto

NEC

NEC UNIVERGE UM8700 Manual de usuario

NEC

NEC Univerge SV8100 Manual de usuario

NEC

NEC Univerge UM8000 Manual de usuario

NEC

NEC SL1100 Manual de usuario

NEC

NEC VisuaLink 384 Manual de usuario

NEC

NEC UNIVERGE SL2100 Manual de usuario

NEC

NEC UNIVERGE SL2100 Manual de usuario

NEC

NEC SOPHO 2000 IPS DM Manual de usuario

NEC

NEC Univerge SV9100 Manual del propietario

NEC

NEC Conference Max Plus Manual de usuario

NEC

NEC SV8500 Manual de usuario

NEC

NEC Aspire 16CNFU Manual de usuario

NEC

NEC Univerge SV9100 Manual de usuario

NEC

NEC ASPILA EX Manual del propietario

NEC

NEC Univerge SV8100 Manual de servicio

NEC

NEC ElectraElite IPK Instrucciones de funcionamiento e instalación

NEC

NEC UNIVERGE SL2100 Manual de usuario

NEC

NEC TOPAZ Manual de usuario

NEC

NEC Univerge UM8000 Instrucciones de funcionamiento e instalación

NEC

NEC Univerge SV 9500 Manual de usuario

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario