NEC EP-753304DU-R Manual de usuario
Document No. U12173EJ1V0UM00 (1st edition)
Date Published June 1997 N
Printed in Japan
©1997
EP-753304DU-R
EMULATION PROBE
The information in this document is subject to change without notice.
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a device described herein or any other liability arising
from use of such device. No license, either express, implied or otherwise, is granted under any patents,
copyrights or other intellectual property rights of NEC Corporation or of others.
M7A 94.11
The export of this product from Japan is prohibited without governmental license. To export or re-export this product from
a country other than Japan may also be prohibited without a license from that country. Please call an NEC sales
representative.
NEC Electronics Inc. (U.S.)
Santa Clara, California
Tel: 800-366-9782
Fax: 800-729-9288
NEC Electronics (Germany) GmbH
Duesseldorf, Germany
Tel: 0211-65 03 02
Fax: 0211-65 03 490
NEC Electronics (UK) Ltd.
Milton Keynes, UK
Tel: 01908-691-133
Fax: 01908-670-290
NEC Electronics Italiana s.r.1.
Milano, Italy
Tel: 02-66 75 41
Fax: 02-66 75 42 99
NEC Electronics Hong Kong Ltd.
Hong Kong
Tel:2886-9318
Fax: 2886-9022/9044
NEC Electronics Hong Kong Ltd.
Seoul Branch
Seoul, Korea
Tel: 02-528-0303
Fax: 02-528-4411
NEC Electronics Singapore Pte. Ltd.
United Square, Singapore 1130
Tel:253-8311
Fax: 250-3583
NEC Electronics Taiwan Ltd.
Taipei, Taiwan
Tel: 02-719-2377
Fax: 02-719-5951
NEC do Brasil S.A.
Sao Paulo-SP, Brasil
Tel: 011-889-1680
Fax: 011-889-1689
NEC Electronics (Germany) GmbH
Benelux Office
Eindhoven, The Netherlands
Tel:040-2445845
Fax: 040-2444580
NEC Electronics (France) S.A.
Velizy-Villacoublay, France
Tel:01-30-67 58 00
Fax: 01-30-67 58 99
NEC Electronics (France) S.A.
Spain Office
Madrid, Spain
Tel: 01-504-2787
Fax: 01-504-2860
NEC Electronics (Germany) GmbH
Scandinavia Office
Taeby, Sweden
Tel: 08-63 80 820
Fax: 08-63 80 388
Regional Information
Some information contained in this document may vary from country to country. Before using any NEC
product in your application, please contact the NEC office in your country to obtain a list of authorized
representatives and distributors. They will verify:
• Device availability
• Ordering information
• Product release schedule
• Availability of related technical literature
• Development environment specifications (for example, specifications for third-party tools and
components, host computers, power plugs, AC supply voltages, and so forth)
• Network requirements
In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary
from country to country.
J96. 8
PREFACE
Intended Readership
This manual is intended for users performing debugging on the
µ
PD753304 using the IE-75001-R + IE-75300-
R-EM and EP-753304DU-R.
Remark The IE-75001-R is a product equivalent to the IE-75000-R (maintenance product) with
the IE-75000-R-EM removed. The IE-75000-R can be substituted for the IE-75001-R.
Inthiscase,replacetheIE-75000-R-EMincorporatedintheIE-75000-RwiththeIE-75300-R-EM.
Purpose
This manual provides an understanding of the method for connecting the EP-75304DU-R to the IE-75001-R +
IE-75300-R-EM and methods for setting mask options.
Organization
The contents of this manual can be roughly divided under the following general headings.
General description
Methods for connecting this product
Methods for setting mask options
Using this Manual
Beforereadingthismanual,besuretoreadthemanualfortheIE-75001-RorIE-75300-R-EMandgetathorough
understanding of the configuration and functions of the debugging system.
When using the IE-75000-R as an in-circuit emulator, “IE-75001-R” should be read as “IE-75000-R”.
Unless otherwise specified, “IE-75001-R” means “IE-75001-R + IE-75300-R-EM”.
•To understand general EP-753304DU-R functions and connection methods:
→Read this manual in the order of the table of contents.
•To understand the operating environment, configuration and object devices:
→Read CHAPTER 1 GENERAL DESCRIPTION.
•To understand the connection method in detail:
→Read CHAPTER 2 CONNECTIONS.
•To understand the mask option setting method:
→Read CHAPTER 3 SETTING MASK OPTIONS.
Legend
Note: Explains important points in the text.
Caution: Contains important information that is of special importance.
Remark: Provides supplementary explanations.
Related Documents
•IE-75000-R/IE-75001-R User’s Manual (Document No.: EEU-1416)
•IE-75300-R-EM User’s Manual (Document No.: UII354E)
Confirmation of Package Contents
The following items are included in the EP-753304DU-R packing box. Check the items carefully. If any item is
missing or damaged, be sure to contact an NEC sales representative or an authorized dealer.
•Emulation Probe 1
•Adaptor Board 1
•User’s Manual (This Manual) 1
•Spacer (with 2 screws) Note 1 1
•Installation Screws Note 2 2
Notes 1. Used to connect the adapter board and the IE-75000-R-EM.
2. Used to connect the emulation probe and the IE-75001-R.
– i –
CONTENTS
CHAPTER 1 GENERAL DESCRIPTION.............................................................................................. 1
1.1 Operating Environment........................................................................................................ 1
1.2 Configuration......................................................................................................................... 2
1.3 Target Devices ...................................................................................................................... 4
CHAPTER 2 CONNECTIONS ............................................................................................................... 5
2.1 Connection of IE-75001-R and Target System ................................................................. 5
2.2 Power ON and OFF Sequence ............................................................................................ 11
2.3 Removing Emulation Probe from Target System ............................................................ 12
CHAPTER 3 SETTING PORT 3 ........................................................................................................... 13
CHAPTER 4 MASK OPTION SETTING............................................................................................... 15
4.1 Pull-up Setting of RESET Signal ........................................................................................ 15
4.2 LCD Drive Divide Registors Setting................................................................................... 16
APPENDIX EMULATION PROBE PIN CORRESPONDENCE TABLE ............................................ 17
– ii –
[MEMO]
1
CHAPTER 1 GENERAL DESCRIPTION
CHAPTER 1 GENERAL DESCRIPTION
This chapter gives an outline of the EP-753304DU.
1.1 Operating Environment
TheEP-753304DU-RisaprobesetdesignedforconnectionwiththeIE-75001-Randthetargetsystem. Byusing
the EP-753304DU-R in such connections, a debugging environment for the
µ
PD753304 is created, making
comprehensive debugging of the target system hardware and software possible. See CHAPTER 2 CONNEC-
TIONS for concerning concrete connection methods.
Figure 1-1. Connection to IE-75001-R and Target System
Note Replace the IE-75000-R-EM incorporated in the IE-75000-R with the IE-75300-R-EM.
Adapter Board Emulation Probe
+
EP-753304DU-R
Target System
IE-75300-R-EM
IE-75001-R
or
IE-75000-RNote
(Sold separately)
2
CHAPTER 1 GENERAL DESCRIPTION
1.2 Configuration
The EP-753304DU-R is a set consisting of an emulation probe and an adapter board.
(1) Emulation probe
The emulation probe is configured from the following 3 components.
•42-pin shrink DIP probe
Connects the IE-75001-R and the target system.
•Ground clip
Connectsto thetarget system’sGND.Thegroundclipmakesthe GNDpotential oftheIE-75001-Randthe
target system the same, and protects the system against static electricity and noise.
•External sense clips
Consists of 8 sense clips. These clips are used to monitor the IC pin voltage level of the target system.
(2) Adapter board
The adapter board is used to connect the emulation probe and the emulation board (IE-75300-R-EM).
Theadapterboardalsoincludesfunctionstosetmaskoptions.Fordetails,seeCHAPTER3SETTINGMASK
OPTIONS.
3
CHAPTER 1 GENERAL DESCRIPTION
Figure 1-2. Emulation Probe
Figure 1-3. Adapter Board
42-Pin Shrink DIP
Ground Clip
External Sense Clips
CN5 SW1 IC1
CN1
CN2
CN4
CN3
DP1
Tabla de contenidos
Otros manuales de Hardware de computadora de NEC
NEC
NEC N8103-179 Instrucciones de funcionamiento
NEC
NEC IE-178048-NS-EM1 Manual de usuario
NEC
NEC N8105-65 Manual de usuario
NEC
NEC Express5800/B120f Manual de usuario
NEC
NEC N8151-121 Manual de usuario
NEC
NEC NL12880BC20-05 Manual de instrucciones
NEC
NEC XN120 Vision Manual de usuario
NEC
NEC NEAX 2400 Manual de usuario
NEC
NEC MultiSync M Series Manual de usuario
NEC
NEC SIGMABLADE Series Manual de usuario
NEC
NEC IE-78K0-NS-P04 Manual de usuario
NEC
NEC 78K/0 Series Manual de usuario
NEC
NEC NEC Express5800 Series Manual de usuario
NEC
NEC N8160-85 Manual de usuario
NEC
NEC VERSA DOCK - SERVICE Manual de usuario
NEC
NEC Express 5800 120Eg Manual de usuario
NEC
NEC IE-789882-NS-EM1 Manual de usuario
NEC
NEC N8104-128 Manual de usuario
NEC
NEC NEC Express5800 Series Manual de usuario
NEC
NEC N8151-60 Manual de usuario
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
