1.PRECAUTIONS
●Storageandkeeping
1. Do not expose the monitor to excessive heat or cold. The storage temperature of this device is -30~+80℃, and the
operating temperature is -20~+70 ℃. The humidity is RH90%
2. Never use this device near a bathtub, wash basin, kitchen, damp basement, swimming pool or similar places.
3. Never use this device in environments with excessive moisture, dust or smoke.
4. Avoid dropping or striking this device.
5. Avoid using this device in enclosed spaces, areas with excessive vibration or subject to severe impacts.
6. Never puncture, scratch or use abrasive cleaning materials on this device.
7. Do not place cables where they may be pinched or stepped on.
8. Leave at least a 2" space between the monitor and walls, cabinets or other objects to allow adequate air circulation
around the device.
9. The monitor is not designed to be waterproof.
●Operatingprecautions
1. The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical system.
2. Make sure all cables are connected properly. Observe polarity. Improper cable connections may damage the
monitor. Remove the power cable connections when you do not intend to use the unit.
3. Operate the unit according to the instruction.
WARNING!
1. High voltage is present within the monitor. The opening of the case should be by professionals.
2. Do not watch the video while driving unless you are monitoring the rear view camera display.
SPECIAL NOTICE
Occasionally, a few highlights or dark spots may occur on the LCD screen. This is a very common phenomenon in active
matrix display technology, and doesn't necessarily indicate any defects or faults. Never try to repair
yourself. In case of any problems, please turn off the display at once and notify our company or authorized dealer. The
monitor is a complex device. Any disassembly or modification may lead to damage and void the warrantee.
1.855.730.5555
www.nbs-cam.com
