NavLinkz RL2-SC14 Manual de usuario

Version 09.03.2020 CAM(V31)9275&9276(V11) RL2-SC14

r.LiNK Video-inserter

RL2-SC14

Compatible with

Volvo vehicles with Sensus Connect Infotainment and internet button

with 7 inch monitor

Video-inserter for rear-view camera

and two additional video sources

Product features

Video-inserter for factory-infotainment systems

2 CVBS video-inputs for after-market devices (e.g. DVD-Player, DVB-T tuner)

FBAS Rear-view camera video-input

Automatic switching to rear-view camera input on engagement of the reverse gear

Activatable parking guide lines for rear-view camera (not for all vehicles)

Picture-in-picture (PIP) mode combining after-market rear-view camera picture

with factory parking sensor graphic (not for all vehicles)

Video-in-motion in drive mode (ONLY for connected video-sources)

Video-inputs NTSC and PAL compatible

All manuals and user guides at all-guides.com

Version 09.03.2020 CAM(V31)9275&9276(V11) RL2-SC14

Page2

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the compatibility of vehicle and accessories

1.3. Connectors –video interface

1.4. Dip-switch settings

1.4.1. Enabling the interface’s video inputs (dip 2-3)

1.4.2. Rear-view camera setting (dip 5)

1.4.3. PDC car setting (dip 8)

2. Installation

2.1. Place of installation

2.2. Connection schema

2.3. Connecting - PNP power / CAN cable

2.3.1. Exchange of Quadlock chambers

2.4. Analogue connecting - video-interface

2.5. Connection –picture signal cable

2.6. Connecting video sources

2.6.1. After-market rear-view camera

2.6.1.1. Case 1: CAN-box receives the reverse gear signal

2.6.1.2. Case 2: CAN-box does not receive the reverse gear signal

2.6.2. Audio-insertion

2.7. Connecting video-interface and keypad

2.8. Picture settings and guide lines

3. Interface operation

3.1. By infotainment buttons

3.2. By external keypad

4. Specifications

5. Frequently asked questions

6. Technical support

All manuals and user guides at all-guides.com

Version 09.03.2020 CAM(V31)9275&9276(V11) RL2-SC14

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. This product should only

be used while standing or to display fixed menus or rear-view-camera video when the

vehicle is moving, for example the MP3 menu for DVD upgrades.

Changes/updates of the vehicle’s software can cause malfunctions of the interface. We

offer free software-updates for our interfaces for one year after purchase. To receive a free

update, the interface must be sent in at own cost. Labor cost for and other expenses

involved with the software-updates will not be refunded.

1. Prior to installation

Read the manual prior to installation.

Technical knowledge is necessary for installation. The place of installation must be free of

moisture and away from heat sources.

1.1. Delivery contents

Take down the serial number of the interface and store this manual for support

purposes: ____________________

All manuals and user guides at all-guides.com

Version 09.03.2020 CAM(V31)9275&9276(V11) RL2-SC14

Page4

Requirements

Brand

Compatible vehicles

Compatible systems

Volvo

Vehicles since model year 2014

Sensus Connect with 7 inch monitor and

internet button.

Limitations

Video only The interface inserts ONLY video signals into the infotainment. For inserting

Audio signals either the possibly existing factory audio-AUX-input or a FM-

modulator can be used. If 2 audio sources shall be connected to the

infotainment, an additional electronic is necessary to switch them.

Guide lines / PDC If the CAN-box does not receive the required information from the vehicle CAN-

bus, neither guide-lines nor PDC will be supported.

Factory rear-view camera Automatically switching-back from inserted video to factory rear-view camera is

only possible while the reverse gear is engaged. To delay the switch-back an

additional electronic part is required.

1.2. Checking the compatibility of vehicle and accessories

All manuals and user guides at all-guides.com

Version 09.03.2020 CAM(V31)9275&9276(V11) RL2-SC14

Page5

1.3. Connectors –video interface

The video-interface converts the video signals of connected after-market sources in a factory

monitor compatible picture signal which is inserted in the factory monitor, by using separate

trigger options.

1.4. Dip-switch settings

Some settings must be selected by the dip-switches on the

video-interface. Dip position down is ON and position up is OFF.

After each Dip-switch-change a power-reset of the Interface-box has to be performed!

See following chapters for detailed information.

Dip

Function

ON (down)

OFF (up)

No function

set to OFF

CVBS AV1-input

enabled

disabled

CVBS AV2-input

enabled

disabled

No function

set to OFF

Rear-view cam type

after-market

factory or none

No function

set to OFF

No function

set to OFF

PDC car

enabled

disabled

All manuals and user guides at all-guides.com

Version 09.03.2020 CAM(V31)9275&9276(V11) RL2-SC14

Page6

1.4.1.1. Enabling the interface’s video inputs (dip 2-3)

Only the enabled video inputs can be accessed when switching through the interface’s video

sources. It is recommended to enable only the required inputs for the disabled will be

skipped when switching through the video-interfaces inputs.

1.4.1.2. Rear-view camera setting (dip 5)

If set to OFF, the interface switches to factory picture while the reverse gear is engaged to

display factory rear-view camera.

If set to ON, the interface switches to its rear-view camera input „Camera-IN“ while the

reverse gear is engaged.

1.4.1.3. PDC car settings (dip 8)

Dip 8 is for the PDC car representation. If set to ON while the reverse gage is enabled, the

display shows a smaller reverse picture and for that the PDC car representation additionally

appears on its right side. If set to OFF while the reverse gage is enabled, the reverse picture

will be shown in full size.

Note: Dip 1 und 4 are out of function and have to be set to OFF.

2. Installation

To install the interface, first switch off the ignition and disconnect the vehicle’s battery.

Please read the owner`s manual of the car, regarding the battery`s disconnection! If

required, enable the car`s Sleep-mode (hibernation mode)

In case the sleep-mode does not succeed, the disconnection of the battery can be done

with a resistor lead.

If the necessary stabilized power supply for the interface is not taken directly from the

battery, the chosen connection has to be checked for being constantly stabile.

The interface needs a permanent 12V source!

Note: Before a final installation, we recommend a test-run to ensure the compatibility of the

vehicle and the interface. Due to changes in the production of the vehicle manufacturer

there’s always a possibility of incompatibility.

2.1. Place of installation

The interface should be installed on the backside of the head unit.

All manuals and user guides at all-guides.com

Version 09.03.2020 CAM(V31)9275&9276(V11) RL2-SC14

Page7

2.2. Connection schema

All manuals and user guides at all-guides.com

Version 09.03.2020 CAM(V31)9275&9276(V11) RL2-SC14

Page8

2.3. Connection - PNP Power / CAN cable

Connect the female 10pin connector of the 10pin Power / CAN cable to the 10pin connector

of the video interface.

Remove the female 16pin Quadlock connector of the vehicle harness from the rear-side of

the head-unit, clip-out chamber connectors A, B and the optical leads (see left picture and

next page) and connect this Quadlock connector to the male 16pin Quadlock connector of

the PNP Power / CAN cable.

Clip-in the previously clipped-out chamber connectors in the opposite Connect the opposite

female 16pin Quadlock connector of the PNP Power / CAN cable and connect this Quadlock

connector to the previously become free male 16pin Quadlock connector at the rear-side of

the head unit.

All manuals and user guides at all-guides.com

Version 09.03.2020 CAM(V31)9275&9276(V11) RL2-SC14

Page9

2.3.1. Exchange of Quadlock chambers

All manuals and user guides at all-guides.com

Version 09.03.2020 CAM(V31)9275&9276(V11) RL2-SC14

Page10

2.4. Analogue connecting - video-interface

If the communication between the CAN box and the vehicle’s CAN bus does not succeed (not

all vehicles are compatible), an analogue connection is required by connecting the 6pin to

8pin cable without the CAN box.

Connect the female 6pin connector of the 6pin to 8pin cable to the 6pin connector

of the video interface.

Connect the yellow, the red and the black wire of the 6pin to 8pin cable to the

vehicle’s power and ground.

Note: The connection of the green wire (Reverse signal) will be described in chapter “After-

market rear-view camera”. The white wire, can be used to switch the enabled video sources,

same as the keypad (see chapter “video interface-operation”). The grey wire stays

unconnected.

All manuals and user guides at all-guides.com

Otros manuales para RL2-SC14

Tabla de contenidos

Otros manuales de Accesorios para automóviles de NavLinkz

NavLinkz

NavLinkz RL4-MIB3-E Manual de usuario

NavLinkz

NavLinkz RL4-LR17 Manual de usuario

NavLinkz

NavLinkz RL2-SC14 Manual de usuario

NavLinkz

NavLinkz RL4-LR16-8 Manual de usuario

NavLinkz

NavLinkz RL4-UCON8-LV Manual de usuario

NavLinkz

NavLinkz RL4-MZD88 Manual de usuario

NavLinkz

NavLinkz RL3-SC15 Manual de usuario

NavLinkz

NavLinkz RL2-UCON8-SM Manual de usuario

NavLinkz

NavLinkz RL3-LR17 Manual de usuario

NavLinkz

NavLinkz RL5-UCON65 Manual de usuario

NavLinkz

NavLinkz RL1-RLK Manual de usuario

NavLinkz

NavLinkz RL2-MBN45 Manual de usuario

NavLinkz

NavLinkz RL5-UCON8-CP Manual de usuario

NavLinkz

NavLinkz RL-UCON-D1 Manual de usuario

NavLinkz

NavLinkz RL4-UCON5-CP Manual de usuario

NavLinkz

NavLinkz RL4-NG4-HU Manual de usuario

NavLinkz

NavLinkz RL4-UCON12 Manual de usuario

NavLinkz

NavLinkz RL4-MIB2-E18 Manual de usuario

NavLinkz

NavLinkz RL4-MBN55 Manual de usuario

NavLinkz

NavLinkz RL4-UCON5-F Manual de usuario

NavLinkz

NavLinkz CAM-N-CV133-V Manual de usuario

NavLinkz

NavLinkz RL3-MIB-TT Manual de usuario

NavLinkz

NavLinkz VL2-MBN5-222 Manual de usuario

NavLinkz

NavLinkz RL4-R40 Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario