NavAccess E-802 Manual de usuario
1
User Manual
of
NavAccess E-802
2
Contents
Preface 4
☆Getting Started 5
1. External Components 5
1.1 Front 5
1.2 Back 6
1.3 Left 7
1.4 Top 7
1.5 Right 8
1.6 Bottom 9
2. Powering the NavAccess E-802 9
2.1 Battery Installation 9
2.2 Power On 9
2.3 Power Off 10
3. Accessories 10
3.1 AC/DC Adapter 10
3.2 Automobile Adapter 11
3.3 Mounting Accessories of NavAccess E-802 11
3.4 Installing the Cradle into the Mount 12
3.5 Mounting Instruction 12
3.6 Attaching NavAccess E-802 to Cradle 12
3.7 Dismounting the NavAccess E802 and the Mount 12
3.8 Removing the Cradle from the Mount Arm 12
☆Connecting the NavAccess E-802 to a Computer 13
1. Software Installation 13
2. Connecting to a Computer 14
3. File Format Conversion Software 15
☆Operating Instructions 16
1. Introduction 16
1.1 The Stylus 16
1.2 External Controls 17
1.3 Soft Keyboard 18
1.4 Playlist Dialog Boxes 18
1.5 Popup Menus 19
1.6 Power 20
2. Main Menu 21
3. System Setup 22
3.1 Sound Setup 23
3.2 Backlight Setup 23
3
3.3 Memory 23
3.4 Time and Date 24
3.5 Power Management 24
3.6 System Information 24
3.7 Screen Calibration 25
4. Photos 25
4.1 Browser 25
4.2 Player 26
5. Movie 28
5.1 Browser 28
5.2 Player 29
6. eBooks 30
6.1 Browser 30
6.2 Reader 31
7. Music 31
7.1 Browser 31
7.2 Player 31
8. Backlight/Volume Overlays 32
☆GPS Navigation 33
1. Usage Instructions 33
2. GPS Issues 33
3. Preventing GPS Signal Problems 34
☆Troubleshooting 35
☆Preventative Measures 37
1. General Rules 37
2. Travel Instructions 37
3. Energy-Saving Tips 38
☆Safety Precautions 39
1. Recharging 39
2. Power Adapter 39
3. Battery 39
Technical Specifications 40
PC Requirements 41
4
Preface
Precautions
For safety, we strongly recommend that you never operate the GPS navigation system
while driving.
Furthermore, attention should be paid to the following basic precautions when operating the
NavAccess E-802:
●The SD card should be removed only after you press the power button to shut down the unit.
Never pull out the SD card while the E-802 is operating.
●Never press the power button repeatedly or continuously. Otherwise, the unit could be
damaged.
●Never expose the NavAccess E-802 to strong sunlight or heat for extended periods of time.
The acceptable operating environment of the NavAccess E-802 is 0~70℃and 0~90%
humidity. The acceptable storage environment is -10~80℃and 0~90% humidity.
Also, when operating the GPS functions of the NavAccess E-802, these additional precautions
apply:
●This system functions as a reference for navigation only, and should never be used for
accurate measurements of direction, distance, location, etc.
●For GPS satellite positioning to work, stay at same location until the positioning process is
complete. It is best to stay in an open, uncovered location. This positioning process may
need more than 10 minutes.
●When the system is located in a building or a tunnel, or is close to a high obstacle, the
system may temporarily be unable to provide positioning and navigation information.
●Any radio transmitters (including mobile phones) might interfere with GPS satellite signals,
thereby resulting in incorrect positioning information.
●If your car is equipped with sheathing paper or explosion-proof plaster, these features might
interfere with the quality of the GPS signal.
●Route planning advice is for reference only. Road properties (such as one-way status and
turn restrictions) may change according to local conditions, and therefore may not be
consistent with the information given by the E-802. You should comply with all local traffic
regulations and drive as local road conditions require. When the NavAccess E-802 is placed
inside a car, it should be positioned in place by means of a car tripod. Avoid positioning the
NavAccess E-802 in the positions below
Driver’s line-of-sight Any position where it is not fixed in place
A position where an airbag is located A position where an airbag expands
5
☆Getting Started
1. External Components
1.1 Front
2
3
4
57
6
1
6
No. Component Description
(1) Zoom Out Button Decreases size of selected item (photos and maps only).
(2) Zoom In Button Increases size of selected item (photos and maps only).
(3) Back Button Returns to the previous menu.
(4) Menu Button Returns to the main menu.
(5) Navigation Buttons Used to navigate through menus, lists and other items.
The OK button is used to confirm a selection.
(6) Built-In Speakers Plays sounds when headset is not present
(7) 3.5″Touchscreen
Displays menus, lists, photos, videos and more. The
screen is touch sensitive, and the included stylus may be
used to perform the functions of many of the buttons on
the unit.
6
1.2 Back
1
2
No. Component Description
(1) Lithium-Polymer Battery [See Note 1]
(2) Reset Key Forcibly resets the NavAccess E-802 to factory default
settings
[Note 1] Specification of battery:
Dimensions 62.3mm(L)×52.5mm(H)×7.5mm(W)
Capacity 1500mAh
Weight 35g
Input voltage DC 5V
Output voltage 2.75V ~ 4.2V
Operating temperature -20°C ~ +60°C
Storage temperature -20°C ~+60°C
7
1.3 Left
2
3
1
4
No. Component Description
(1) USB Interfaces
The larger (host) interface is used to connect the
E-802 to other USB equipment.
The smaller (slave) interface is used to connect
the E-802 to a PC.
(2) Adjustment Knob Adjusts sound volume and backlight brightness
(3) Hanging Hole Used to suspend the unit
(4) Earphone Jack Connects the unit to stereo headphones
1.4 Top
1 23
No. Component Description
(1) Stylus Used to control the unit through the touch screen
(2) SD Card Slot Used to expand the memory of the unit with an SD Card
[See Note 2]
(3) Power Button Used to power the unit on and off
8
[Note 2] The NavAccess E-802 can support an SD card with a maximum capacity of 1GB.
[Inserting an SD Card]
With the card facing forward, align the card with the slot to insert it in place.
When removing the SD card, first confirm that the SD card is idle and then press its top edge
slightly to release it. Finally pull out the card.
[Notice]
●Do not place anything other than an SD card in the SD Card Slot.
●When outside the E-802, the SD card should be repacked properly to avoid dust and
humidity.
1.5 Right
1
2
No. Component Description
(1) Hold Switch Locks the touchscreen and external buttons
(2) Power Jack Connects the unit to one of its power adapters [See Note 3]
[Note 3] Specification of the AC/DC power adapter
Dimensions 71mm(L)×51mm(W)×26mm(H)
Input voltage 100V～240V
Output voltage 5V
Net weight 150 g
Gross weight 172g
Storage temperature -20°C ~ +60°C
Operating temperature 0 ~ +40°C
Relative storage humidity 45 ~ 85%
Relative working humidity 45～85%
9
1.6 Bottom
1
No. Component Description
(1) Mounting Hole Not applicable in this model
2. Powering the NavAccess E-802
2.1 Battery Installation
When using NavAccess E-802, please ensure the battery has been installed correctly.
1
2 3 4
2.2 Power On
1
To power the NavAccess E-802, press the power button (1) and wait for approximately 5
seconds. The power button will glow green. This means the unit is ready to use.
10
2.3 Power Off
1
To shut down the NavAccess E-802, press the power button (1). The unit will shut down
immediately.
3. Accessories
3.1 AC/DC Adapter
The AC/DC Adapter is used to recharge the battery of the NavAccess E-802. To use the
adapter, plug the adapter into the Power Jack of the E-802. Then plug the adapter into a
standard 100V～240V AC power outlet, as shown in the figure below.
When charging, the Power Button glows orange. Once charging starts, leave the adapter
connected until the Power Button glows green. This means that the battery is fully charged. The
charging process may need several hours.
Tabla de contenidos
