Nautilus NB 2000 Manual de usuario
Assembly Manual
NB 2000
EXERCISE BIKE
PARTS LIST
ITEM NO. DESCRIPTION QTY.
1 MAIN FRAME 1
2 REAR STABILIZER 1
3 FRONT STABILIZER 1
4 BOOT SHROUD 1
5 HANDLE BAR MAST 1
6 SEAT 1
7 SEAT POST 1
8 HANDLE BAR ASSEMBLY 1
9 COMPUTER 1
10 COMPUTER LOWER CASE 1
11 WATER BOTTLE CAGE 1
12 REMOTE CAGE CASE 1
13R PEDAL RIGHT 1
13L PEDAL LEFT 1
14R PEDAL STRAP RIGHT 1
14L PEDAL STRAP LEFT 1
15 ADAPTOR 1
16 M8 WASHER 12
17 M8 SPRING WASHER 10
18 M8x1.25x65 SOCKET HEAD CAP SCREW 4
19 COMPUTER CABLE 1
20 HEART RATE WIRE 1
21 M5x0.8x10L PAN HEAD SCREW 4
23 SENSOR CABLE 1
24 M8x1.25x40L SOCKET HEAD CAP SCREW 6
25 POP-PIN 1
26 M8x1.25x40L SOCKET HEAD CAP SCREW 2
27 M4x0.7x10L PAN HEAD SCREW 4
28 M4x0.7x12L PAN HEAD SCREW 4
TOOLS AND HARDWARE
PARTS
PARTS
ASSEMBLY INSTRUCTIONS NB 2000 UPRIGHT BIKE
STEP 1: Attaching the Rear Stabilizer
Attach the rear stabilizer (2) to the base frame rear bracket, using 2 - 65mm socket
head cap screws (18), 2 - spring washers (17) and 2- washers (16).
STEP 2: Attaching the Front Stabilizer
Attach the front stabilizer (3) to the base frame front bracket, using 2 - 65mm
socket head cap screws (18), 2 - spring washers (17) and 2 - washers (16).
ASSEMBLY INSTRUCTIONS NB 2000 UPRIGHT BIKE
STEP 3: Installing Boot Shroud and
Handlebar Mast
Slide the boot shroud (4) up the handlebar mast (5). This part will be installed last.
Plug the computer cable (19) into the sensor cable (23). Attach the handlebar mast
(5) to the main frame (1) using 6 - 15mm socket head cap screws (24), 6 - spring
washers (17) and 6 - washers (16) .
Lower the boot shroud (4) and secure with 4 - 10mm pan head screws (21).
STEP 4: Installing Seat Post and Seat
Insert seat post (7) into frame. Thread seat post locking pop pin (25) into frame to
secure seat height adjustment. Attach seat (7) and adjust to desired angle. Note:
Typically the seat should be level with the ground. After a few workouts you may
want to adjust this angle up or down for comfort. Tighten lock nut under the seat
to secure.).
ASSEMBLY INSTRUCTIONS NB 2000 UPRIGHT BIKE
STEP 5: Attaching the Handlebar
Attach the handlebar assembly (8) to the handlebar mast (5) using 2 – 40mm
socket head cap screws (26), and 2 - washers (16).
STEP 6: Installing the Computer Console
Plug in the computer cable (19), and the grip heart rate wire (20) into back of the
computer (9).
Attach the computer (9) to the handlebar assembly (8) using 4 - 10mm pan head screws
(27). Be careful not to damage or disconnect computer wires. Then attach the computer
lower case (10) to the computer (9) using 4 – 12mm pan head screws (28).
ASSEMBLY INSTRUCTIONS NB 2000 UPRIGHT BIKE
STEP 7: Installing Pedals and Pedal Straps
Thread the right pedal (13R) marked with an "R" into the right side of the crank
arm (30). Install the right pedal strap at desired length (14R)
(Important: The thread direction of the right pedal is clockwise.)
Thread the left pedal (13L) marked with an "L" into the left side of the crank arm
(30). Install the left pedal strap at desired length (14L)
(Important: The thread direction of the left pedal is counter-clockwise.)
STEP 8: Installing Adapter
Plug the 110 V adapter (15) into the plug outlet in the bike shroud. Now plug the
adapter into the wall outlet. Note: There is not a power switch on the machine.
Simply begin pedaling to activate computer. The bike will go into Sleep Mode
when not in use and does not need to be unplugged.
ASSEMBLY INSTRUCTIONS NB 2000 UPRIGHT BIKE
Final Check
Assembly of your Nautilus bike is now complete. Check again to insure that all parts
are properly installed and that all nuts and bolts are completely secured. Get on the
bike and check to see that the computer console and resistance system are working
properly.
Please be sure to read through your Nautilus owner’s manual completely before
using your bike. It will describe in detail how to operate the product safely and cor-
rectly.
Should you experience any problems or have any additional questions about your
Nautilus bike, please contact your Authorized Nautilus Fitness Retailer from where
your equipment was purchased.
We hope you enjoy your new Nautilus equipment for many years to come!
The Nautilus Group
1886 Prairie Way
Louisville, Colorado 80027
1.888.471.0014
www.nautilus.com
© 2002 Nautilus, Inc. rev. B
Tabla de contenidos
Otros manuales de Bicicleta estática de Nautilus
Nautilus
Nautilus U614 Manual de usuario
Nautilus
Nautilus Schwinn IC3 Manual de usuario
Nautilus
Nautilus U618 Manual de usuario
Nautilus
Nautilus R514 Manual de usuario
Nautilus
Nautilus Be Strong Commercial R916 Manual de usuario
Nautilus
Nautilus R618 Manual de usuario
Nautilus
Nautilus R514 Manual de usuario
Nautilus
Nautilus U514 Manual de usuario
Nautilus
Nautilus U616 Manual de usuario
Nautilus
Nautilus U616 Manual de usuario
Nautilus
Nautilus Be Strong Commercial R916 Manual de usuario
Nautilus
Nautilus R514 Manual de usuario
Nautilus
Nautilus U514 Manual de programación
Nautilus
Nautilus NB 3000 Manual de usuario
Nautilus
Nautilus Bowflex C7 Manual de usuario
Nautilus
Nautilus U614 Manual de usuario
Nautilus
Nautilus E616 Manual de usuario
Nautilus
Nautilus NB 1000 Manual de usuario
Nautilus
Nautilus Be Strong Commercial R916 Manual de usuario
Nautilus
Nautilus Be Strong Commercial Series U916 Manual de usuario
