National Instruments GPIB-BUF Manual de usuario

GPIB-BUF

User Manual

February 1994 Edition

Part Number 320125-01

National Instruments Corporate Headquarters

6504 Bridge Point Parkway

Austin, TX 78730-5039

(512) 794-0100

Technical support fax: (800) 328-2203

(512) 794-5678

Branch Offices:

Australia (03) 879 9422, Austria (0662) 435986, Belgium 02/757.00.20,

Canada (Ontario) (519) 622-9310, Canada (Québec) (514) 694-8521,

Denmark 45 76 26 00, Finland (90) 527 2321, France (1) 48 14 24 24,

Germany 089/741 31 30, Italy 02/48301892, Japan (03) 3788-1921,

Netherlands 03480-33466, Norway 32-848400, Spain (91) 640 0085,

Sweden 08-730 49 70, Switzerland 056/20 51 51, U.K. 0635 523545

MicroGPIB Products

National Instruments has developed the MicroGPIB product line to offer a

series of high performance, low cost IEEE 488 support items that are

packaged in small all-metal cases, capable of being rack mounted.

Limited Warranty

The GPIB-BUF is warranted against defects in materials and workmanship

for a period of two years from the date of shipment, as evidenced by

receipts or other documentation. National Instruments will, at its option,

repair or replace equipment that proves to be defective during the warranty

period. This warranty includes parts and labor.

A Return Material Authorization (RMA) number must be obtained from the

factory and clearly marked on the outside of the package before any

equipment will be accepted for warranty work. National Instruments will

pay the shipping costs of returning to the owner parts which are covered by

warranty.

National Instruments believes that the information in this manual is

accurate. The document has been carefully reviewed for technical accuracy.

In the event that technical or typographical errors exist, National

Instruments reserves the right to make changes to subsequent editions of

this document without prior notice to holders of this edition. The reader

should consult National Instruments if errors are suspected. In no event

shall National Instruments be liable for any damages arising out of or

related to this document or the information contained in it.

EXCEPT AS SPECIFIED HEREIN, NATIONAL INSTRUMENTS MAKES NO

WARRANTIES, EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIMS

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. CUSTOMER’S RIGHT TO RECOVER DAMAGES

CAUSED BY FAULT OR NEGLIGENCE ON THE PART OF NATIONAL

INSTRUMENTS SHALL BE LIMITED TO THE AMOUNT THERETOFORE

PAID BY THE CUSTOMER. NATIONAL INSTRUMENTS WILL NOT BE

LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA, PROFITS,

USE OF PRODUCTS, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES,

EVEN IF ADVISED OF THE POSSIBILITY THEREOF. This limitation of the

liability of National Instruments will apply regardless of the form of action,

whether in contract or tort, including negligence. Any action against

National Instruments must be brought within one year after the cause of

action accrues. National Instruments shall not be liable for any delay in

performance due to causes beyond its reasonable control. The warranty

provided herein does not cover damages, defects, malfunctions, or service

failures caused by owner’s failure to follow the National Instruments

installation, operation, or maintenance instructions; owner’s modification of

the product; owner’s abuse, misuse, or negligent acts; and power failure or

surges, fire, flood, accident, actions of third parties, or other events outside

reasonable control.

Under the copyright laws, this publication may not be reproduced or

transmitted in any form, electronic or mechanical, including photocopying,

recording, storing in an information retrieval system, or translating, in

whole or in part, without the prior written consent of National Instruments

Corporation.

Trademarks

MicroGPIB® is a trademark of National Instruments Corporation.

Product and company names listed are trademarks or trade names of their

respective companies.

Warning Regarding Medical and Clinical Use

of National Instruments Products

National Instruments products are not designed with components and testing

intended to ensure a level of reliability suitable for use in treatment and

diagnosis of humans. Applications of National Instruments products

involving medical or clinical treatment can create a potential for accidental

injury caused by product failure, or by errors on the part of the user or

application designer. Any use or application of National Instruments

products for or involving medical or clinical treatment must be performed by

properly trained and qualified medical personnel, and all traditional medical

safeguards, equipment, and procedures that are appropriate in the particular

situation to prevent serious injury or death should always continue to be

used when National Instruments products are being used. National

Instruments products are NOT intended to be a substitute for any form of

established process, procedure, or equipment used to monitor or safeguard

human health and safety in medical or clinical treatment.

FCC/DOC Radio Frequency

Interference Compliance

This equipment generates and uses radio frequency energy and, if not

installed and used in strict accordance with the instructions in this manual,

may cause interference to radio and television reception. This equipment

has been tested and found to comply with the following two regulatory

agencies:

Federal Communications Commission

This device complies with Part 15 of the Federal Communications

Commission (FCC) Rules for a Class A digital device. Operation is subject

to the following two conditions:

1. This device may not cause harmful interference in commercial

environments.

2. This device must accept any interference received, including

interference that may cause undesired operation.

Canadian Department of Communications

This device complies with the limits for radio noise emissions from digital

apparatus set out in the Radio Interference Regulations of the Canadian

Department of Communications (DOC).

Le présent appareil numérique n’émet pas de bruits radioélectriques

dépassant les limites applicables aux appareils numériques de classe A

prescrites dans le règlement sur le brouillage radioélectrique édicté par le

ministère des communications du Canada.

Instructions to Users

These regulations are designed to provide reasonable protection against

harmful interference from the equipment to radio reception in commercial

areas. Operation of this equipment in a residential area is likely to cause

harmful interference, in which case the user will be required to correct the

interference at his own expense.

There is no guarantee that interference will not occur in a particular

installation. However, the chances of interference are much less if the

equipment is installed and used according to this instruction manual.

If the equipment does cause interference to radio or television reception,

which can be determined by turning the equipment on and off, one or more

of the following suggestions may reduce or eliminate the problem.

• Operate the equipment and the receiver on different branches of your

AC electrical system.

• Move the equipment away from the receiver with which it is interfering.

• Reorient or relocate the receiver’s antenna.

• Be sure that the equipment is plugged into a grounded outlet and that

the grounding has not been defeated with a cheater plug.

Notice to user: Changes or modifications not expressly approved by

National Instruments could void the user’s authority to

operate the equipment under the FCC Rules.

If necessary, consult National Instruments or an experienced radio/television

technician for additional suggestions. The following booklet prepared by

the FCC may also be helpful: How to Identify and Resolve Radio-TV

Interference Problems. This booklet is available from the U.S. Government

Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4.

Contents

About This Manual ..........................................................................ix

Introduction to the GPIB-BUF ...................................................ix

Organization of This Manual......................................................ix

Conventions Used in This Manual .............................................x

Related Documentation ..............................................................x

Customer Communication ..........................................................x

Chapter 1

Description of the GPIB-BUF......................................................1-1

Introduction.................................................................................1-1

What Your Kit Contains.............................................................1-2

Optional Equipment....................................................................1-2

The GPIB-BUF Front Panel .......................................................1-3

The GPIB-BUF Rear Panel ........................................................1-4

The GPIB Connectors.................................................................1-4

Chapter 2

Installation and Operation .................................................2-1

Installation ..................................................................................2-2

Step 1. Inspect the GPIB-BUF...................................2-2

Step 2. Verify the Voltage Requirement....................2-2

Step 3. Configure the Operating Parameters .............2-3

Set Configuration Switches ...........................2-4

Step 4. Connect the Cables ........................................2-6

Step 5. Power on the Unit ..........................................2-7

Operation ....................................................................................2-7

Chapter 3

Technical Information ....................................................................3-1

Power Up ....................................................................................3-1

Addressing ..................................................................................3-2

Data Transfers.............................................................................3-2

EOI .............................................................................................3-3

IFC ..............................................................................................3-4

REN ............................................................................................3-4

Polling the GPIB-BUF ...............................................................3-5

Special Note About Timeouts.....................................................3-8

Multiline Command Group.........................................................3-8

Contents

GPIB-BUF User Manual viii © National Instruments Corp.

Appendix A

Hardware Specifications..............................................................A-1

Appendix B

Customer Communication..........................................................B-1

Glossary...............................................................................................G-1

Figures

Figure 1-1. The GPIB-BUF ...................................................................1-1

Figure 1-2. The GPIB-BUF Front Panel ................................................1-3

Figure 1-3. The GPIB-BUF Rear Panel .................................................1-4

Figure 1-4. The GPIB Connector and Signal Designations ...................1-5

Figure 2-1. GPIB-BUF System Setup Example.....................................2-1

Figure 2-2. Factory Default Switch Settings..........................................2-4

Figure 3-1. Serial Poll Status Byte.........................................................3-5

Tables

Table 1-1. LED Descriptions ................................................................1-3

Table 2-1. Configuration Parameters for Switches 1 through 3 ...........2-4

Table 2-2. Configuration Parameters for Switches 4 through 8 ...........2-5

Table 3-1. Parallel Poll Responses .......................................................3-7

Table A-1. Electrical Characteristics.....................................................A-1

Table A-2. Environmental Characteristics.............................................A-1

Table A-3. Physical Characteristics.......................................................A-2

About This Manual

Introduction to the GPIB-BUF

The GPIB-BUF is one of National Instruments family of MicroGPIB

products. These products are high-performance, low-cost IEEE 488

support items, packaged in small all-metal cases, capable of being rack

mounted.

Organization of This Manual

This manual is organized as follows:

• Chapter 1, Description of the GPIB-BUF, contains general information

about the National Instruments GPIB-BUF and lists components and

accessories.

• Chapter 2, Installation and Operation, describes the procedures for

installing and operating the GPIB-BUF.

• Chapter 3, Technical Information, contains a more detailed description

of the operation of the GPIB-BUF. The timing characteristics of the

parallel port are provided in this chapter.

• Appendix A, Hardware Specifications, contains tables which specify

the electrical, environmental, and physical characteristics of the

GPIB-BUF.

• Appendix B, Customer Communication, contains forms you can use to

request help from National Instruments or to comment on our products

and manuals.

• The Glossary contains an alphabetical list and a description of terms

used in this manual, including abbreviations, acronyms, metric

prefixes, mnemonics, and symbols.

About This Manual

Conventions Used in This Manual

The following conventions are used in this manual.

italic Italic text denotes emphasis, a cross reference,

or an introduction to a key concept.

bold italic Bold italic text denotes a note, caution, or

warning.

bold Bold text denotes the name of light-emitting

diode (LED).

Abbreviations, acronyms, metric prefixes, mnemonics, symbols, and terms

are listed in the Glossary.

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario