National Instruments PXIe-5663E Manual de usuario

PXIe-5663E

Getting Started

2022-07-01

Contents

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Electromagnetic Compatibility Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Verifying the System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Unpacking the Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Verifying the Kit Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Preparing the Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Choosing and Installing the Soware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Soware Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing the Soware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing the NI 5663E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Interconnecting the NI 5663E Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Configuring the NI 5663E in MAX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Locating the Soware and Examples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Soware Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Programming Examples Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

NI Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

ni.com

PXIe-5663E Getting Started

Note Before you begin, install and configure your chassis and controller.

This document explains how to install, configure, and test the NI 5663E. The

NI 5663E is a modular 6.6 GHz RF vector signal analyzer (VSA) with digital

downconversion. The NI 5663E ships with the NI-RFSA instrument driver, which you

use to program the device. You can also use NI-RFmx, available at ni.com/

downloads, to program the device.

The NI 5663E comprises the following devices:

■NI PXIe-5601 (NI 5601) RF downconverter module

■NI PXIe-5622 (NI 5622) IF digitizer module

■NI PXIe-5652 (NI 5652) LO source module

Caution The protection provided by this product may be impaired if it is

used in a manner not described in this document.

Hot Surface If the NI 5663E has been in use, it may exceed safe handling

temperatures and cause burns. Allow the NI 5663E to cool before removing

it from the chassis.

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits

for electromagnetic compatibility (EMC) stated in the product specifications. These

requirements and limits provide reasonable protection against harmful interference

when the product is operated in the intended operational electromagnetic

environment.

This product is intended for use in industrial locations. However, harmful

interference may occur in some installations, when the product is connected to a

peripheral device or test object, or if the product is used in residential or

commercial areas. To minimize interference with radio and television reception and

PXIe-5663E Getting Started

prevent unacceptable performance degradation, install and use this product in strict

accordance with the instructions in the product documentation.

Furthermore, any changes or modifications to the product not expressly approved

by NI could void your authority to operate it under your local regulatory rules.

Caution To ensure the specified EMC performance, operate this product

only with shielded cables and accessories.

Caution To ensure the specified EMC performance, operate this product

only with cables less than 3 meters in length.

Verifying the System Requirements

To use the NI 5663E, your system must meet certain requirements. For more

information about minimum system requirements, recommended system, and

supported application development environments (ADEs), refer to the readme,

which is available on the soware media or online at ni.com/updates.

Unpacking the Kit

Caution To prevent electrostatic discharge (ESD) from damaging the

device, ground yourself using a grounding strap or by holding a grounded

object, such as your computer chassis.

1. Touch the antistatic package to a metal part of the computer chassis.

2. Remove the device from the package and inspect the device for loose

components or any other sign of damage.

Caution Never touch the exposed pins of connectors.

Note Do not install a device if it appears damaged in any way.

3. Unpack any other items and documentation from the kit.

ni.com

PXIe-5663E Getting Started

Store the device in the antistatic package when the device is not in use.

PXIe-5663E Getting Started

Verifying the Kit Contents

Figure 1. NI 5663E Kit Contents

D D

C C

87 9

123

Ω

IN:

5 Vp-p

MAX

OUT:

1 Vp-p

NI PXIe-5652

500 kHz - 6.6 GHz

REF IN/OUT

RF OUT

REF

OUT2

Ω

1 Vp-p

Ω

0.5 W

MAX

Reverse

Power

RF Signal Generator

ACCESS ACTIVE

10 11 12 13

1. NI 5601 RF Downconverter Module

2. NI 5622 IF Digitizer Module

3. NI 5652 LO Source Module

4. Short, Semi-Rigid SMA-to-SMA Cable, Labeled D, Part Number 198776A-01

5. Medium, Semi-Rigid SMA-to-SMA Cable, Labeled C, Part Number 198775A-01

6. Flexible SMA-to-SMA Cable, Part Number 190412B-03

7. SMA Driver Bit, Part Number 190487A-01

8. Screwdriver, Part Number 772006-01

9. 50 Ω Termination Load, Part Number 778353-01, Connected to the NI 5601 LO

OUT Terminal

10. Read Me First: Safety and Electromagnetic Compatibility

11. Maintain Forced-Air Cooling Note to Users

12. NI PXIe-5663E Getting Started Guide (This Document)

13. Driver Soware DVD

ni.com

PXIe-5663E Getting Started

Other Equipment

There are several required items not included in your device kit that you need to

install or operate the NI 5663E.

Required Items

■A PXI Express chassis and chassis documentation. The NI PXIe-1075 chassis

is one available option for your device. For more information about

compatible chassis options, refer to ni.com.

■A PXI Express embedded controller or MXI controller system that meets the

system requirements specified in this guide and chassis documentation.

Optional Items

■A 1 N · m standard SMA torque wrench (NI part number 780487-01).

Preparing the Environment

Ensure that the environment you are using the NI 5663E in meets the following

specifications.

Operating ambient temperature

(IEC 60068-2-1, IEC 60068-2-2)

0 °C to 55 °C

Operating relative humidity (IEC 60068-2-56) 10% to 90%, noncondensing

Maximum altitude 2,000 m (800 mbar) (at 25 °C ambient

temperature)

Pollution Degree 2

Indoor use only.

Caution Clean the hardware with a so, nonmetallic brush or lint free

cloth. Make sure that the hardware is completely dry and free from

contaminants before returning it to service.

PXIe-5663E Getting Started

Note Refer to the NI PXIe-5663E Specifications at ni.com/manuals for

complete specifications.

Soware Options

NI provides several soware options for the NI 5663E—NI-RFmx, the NI-RFSA

instrument driver soware, and the NI-RFSA So Front Panel (SFP).

Table 1. NI 5663E Soware Options

Soware

Option

Description Use Case

NI-RFmx Provides a single-handle instrument

driver with built-in measurements.

Use NI-RFmx SpecAn to perform spectral

measurements.

Use NI-RFmx Demod to perform

modulation quality measurements, such

as EVM.

Use NI-RFmx cellular personalities to

perform physical layer measurement

analysis on supported cellular signals.

NI-RFSA

instrument

driver

The NI-RFSA APIs each provide a fixed

API for interacting with your NI 5663E

device.

NI-RFSA provides standard IVI-based

functionality needed for most vector

signal analyzer applications.

Use NI-RFSA to create custom

measurements or applications that

require I/Q data.

Use NI-RFSA along with the

NI Modulation Toolkit to analyze

modulated signals to test receivers.

NI-RFSA SFP Controls, analyzes, and presents data

similar to stand-alone RF vector signal

analyzers. The NI-RFSA SFP operates on

the PC, so it provides processing,

storage, and display capabilities.

Use the NI-RFSA SFP to interactively

acquire data.

Installing the Soware

You must be an Administrator to install NI soware on your computer.

1. Install an ADE, such as LabVIEW or LabWindows™/CVI™.

2. Insert the driver soware media into your computer. The installer should open

automatically.

ni.com

PXIe-5663E Getting Started

If the installation window does not appear, navigate to the drive, double-click

it, and double-click autorun.exe.

3. Follow the instructions in the installation prompts.

Note Windows users may see access and security messages during

installation. Accept the prompts to complete the installation.

4. When the installer completes, select Restart in the dialog box that prompts

you to restart, shut down, or restart later.

Installing the NI 5663E

Caution To prevent damage to the NI 5663E caused by ESD or

contamination, handle the module using the edges or the metal bracket.

1. Ensure the AC power source is connected to the chassis before installing the

module.

The AC power cord grounds the chassis and protects it from electrical damage

while you install the module.

2. Power o the chassis.

3. Inspect the slot pins on the chassis backplane for any bends or damage prior

to installation. Do not install a module if the backplane is damaged.

4. Remove the black plastic covers from all the captive screws on the module

front panel.

5. Identify a supported slot in the chassis. The following figure shows the

symbols that indicate the slot types.

PXIe-5663E Getting Started

Figure 2. Chassis Compatibility Symbols

NI PXIe-1062Q

12 3 45

1. PXI Express System Controller Slot

2. PXI Peripheral Slot

3. PXI Express Hybrid Peripheral Slot

4. PXI Express System Timing Slot

5. PXI Express Peripheral Slot

6. Touch any metal part of the chassis to discharge static electricity.

7. Ensure that the ejector handle is in the downward (unlatched) position.

8. Place the module edges into the module guides at the top and bottom of the

chassis. Slide the module into the slot until it is fully inserted.

9. Latch the module in place by pulling up on the ejector handle.

10. Secure the module front panel to the chassis using the front-panel mounting

screws.

Note Tightening the top and bottom mounting screws increases

mechanical stability and also electrically connects the front panel to

the chassis, which can improve the signal quality and

electromagnetic performance.

11. Cover all empty slots using filler panels or fill using slot blockers to maximize

cooling air flow.

12. Power on the chassis.

Interconnecting the NI 5663E Modules

Caution The signal pins of this product's input/output ports can be

damaged if subjected to ESD. To prevent damage, remove power from the

ni.com

PXIe-5663E Getting Started

Otros manuales para PXIe-5663E

Tabla de contenidos

Otros manuales de Hardware de red de National Instruments

National Instruments

National Instruments NI PXI-7831R Manual de usuario

National Instruments

National Instruments GPIB-100A Manual de usuario

National Instruments

National Instruments Compact FieldPoint cFP-21 Series Manual de usuario

National Instruments

National Instruments R Series Manual de usuario

National Instruments

National Instruments ISM-7413 Manual de usuario

National Instruments

National Instruments PC-DIO-96 Manual de usuario

National Instruments

National Instruments GPIB-100 Manual de usuario

National Instruments

National Instruments DAQ SCXI-1161 Manual de usuario

National Instruments

National Instruments FIELDPOINT cFP-DO-403 Manual de usuario

National Instruments

National Instruments SCXI-1121 Manual de usuario

National Instruments

National Instruments NI Vision CVS-1456 Manual de usuario

National Instruments

National Instruments NI WAP-3701 Manual de usuario

National Instruments

National Instruments PXI Terminal Block NI TB-2709 Manual de usuario

National Instruments

National Instruments FIELDPOINT FP-1600 Manual de usuario

National Instruments

National Instruments GPIB GPIB-ENET/100 Manual de usuario

National Instruments

National Instruments FieldPoint FP-2000 Manual de usuario

National Instruments

National Instruments 6023E Manual de usuario

National Instruments

National Instruments NI 9203 Manual de usuario

National Instruments

National Instruments AT-232/2 Manual de usuario

National Instruments

National Instruments NI ELVIS III Manual de usuario

National Instruments

National Instruments NI Vision CVS-1454 Manual de usuario

National Instruments

National Instruments SCB-68 Manual de usuario

National Instruments

National Instruments GPIB-120A Manual de usuario

National Instruments

National Instruments PXI Terminal Block NI TB-2708 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario