National Instruments GPIB-100A Manual de usuario

GPIB-100A

User Manual

March 1990 Edition

Part Number 320063-01

National Instruments Corporation

6504 Bridge Point Parkway

Austin, TX 78730-5039

(512) 794-0100

(800) IEEE-488 (toll-free U.S. and Canada)

Technical support fax: (512) 794-5678

Limited Warranty

The GPIB-100A is warranted against defects in materials and workmanship for a period of two years from the

date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option,

repair or replace equipment that proves to be defective during the warranty period. This warranty includes

parts and labor.

A Return Material Authorization (RMA) number must be obtained from the factory and clearly marked on the

outside of the package before any equipment will be accepted for warranty work. National Instruments will

pay the shipping costs of returning to the owner parts which are covered by warranty.

National Instruments believes that the information in this manual is accurate. The document has been

carefully reviewed for technical accuracy. In the event that technical or typographical errors exist, National

Instruments reserves the right to make changes to subsequent editions of this document without prior notice to

holders of this edition. The reader should consult National Instruments if errors are suspected. In no event

shall National Instruments be liable for any damages arising out of or related to this document or the

information contained in it.

EXCEPT AS SPECIFIED HEREIN, NATIONAL INSTRUMENTS MAKES NO WARRANTIES, EXPRESS OR

IMPLIED, AND SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. CUSTOMER'S RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR NEGLIGENCE

ON THE PART OF NATIONAL INSTRUMENTS SHALL BE LIMITED TO THE AMOUNT THERETOFORE PAID BY

THE CUSTOMER. NATIONAL INSTRUMENTS WILL NOT BE LIABLE FOR DAMAGES RESULTING FROM LOSS

OF DATA, PROFITS, USE OF PRODUCTS, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED

OF THE POSSIBILITY THEREOF. This limitation of the liability of National Instruments will apply regardless of

the form of action, whether in contract or tort, including negligence. Any action against National Instrument

must be brought within one year after the cause of action accrues. National Instruments shall not be liable for

any delay in performance due to causes beyond its reasonable control. The warranty provided herein does not

cover damages, defects, malfunctions, or service failures caused by owner's failure to follow the National

Instruments installation, operation, or maintenance instructions; owner's modification of the product; owner's

abuse, misuse, or negligent acts; and power failure or surges, fire, flood, accident, actions of third parties, or

other events outside reasonable control.

Under the copyright laws, this book may not be copied, photocopied, reproduced, or translated, in whole or in

part, without the prior written consent of National Instruments Corporation.

Trademarks

Product names listed are trademarks of their respective manufacturers. Company names listed are trademarks

or trade names of their respective companies.

FCC/DOC Radio Frequency Interference Compliance

This equipment generates and uses radio frequency energy and, if not installed and used in strict

accordance with the instructions in this manual, may cause interference to radio and television

reception. This equipment has been tested and found to comply with (1) the limits for a Class A

computing device, in accordance with the specifications in Subpart J of Part 15 of U.S. Federal

Communications Commission (FCC) Rules, and (2) the limits for radio noise emissions from

digital apparatus set out in the Radio Interference Regulations of the Canadian Department of

Communication (DOC). These regulations are designed to provide reasonable protection against

interference from the equipment to radio and television reception in commercial areas.

There is no guarantee that interference will not occur in a particular installation. However, the

chances of interference are much less if the equipment is used according to this instruction manual.

If the equipment does cause interference to radio or television reception, which can be determined

by turning the equipment on and off, one or more of the following suggestions may reduce or

eliminate the problem.

• Operate the equipment and the receiver on different branches of your AC electrical system.

• Move the equipment away from the receiver with which it is interfering.

• Relocate the equipment with respect to the receiver.

• Reorient the receiver's antenna.

• Be sure that the equipment is plugged into a grounded outlet and that the grounding has not

been defeated with a cheater plug.

If necessary, consult National Instruments or an experienced radio/television technician for

additional suggestions. The following booklet prepared by the FCC may also be helpful: How to

Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S.

Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4.

Preface

Organization of the Manual

This manual is divided into the following chapters:

Chapter 1, Description of the GPIB-100A, contains a brief description of the GPIB-100A Bus

Extender and how it is used. This section also lists all components and accessories. In addition, it

provides system configuration, performance, operating, electrical, environmental, and physical

specifications for the GPIB-100A.

Chapter 2, Installation, contains instructions for configuring and connecting the GPIB-100A into

your system at your operating voltage.

Chapter 3, Configuration and Operation, describes how to configure and operate a GPIB-100A

system.

Chapter 4, Theory of Operation, contains descriptions of how the GPIB-100A circuitry operates.

Appendix A, Operation of the GPIB, describes GPIB terminology and protocol for users

unfamiliar with the GPIB.

Appendix B, Schematic Diagram, contains a detailed schematic diagram of the GPIB-100A.

Appendix C, GPIB-100A Parts Locator Diagram, contains the parts locator diagram for the

GPIB-100A.

Appendix D, Cable Assembly Wire List, contains the listing of wire connections for the

GPIB-100A transmission cable.

Appendix E, Multiline Interface Messages, contains an ASCII chart and a list of the corresponding

GPIB messages.

Appendix F, Mnemonics Key, contains a mnemonics key that defines the mnemonics used

throughout the manual.

Related Document

The following document is a reference that covers in greater detail specific topics introduced in this

manual:

•ANSI/IEEE Standard 488-1978, IEEE Standard Digital Interface for Programmable

Instrumentation.

Preface

GPIB-100A User Manual vi © National Instruments Corporation

Abbreviations Used in the Manual

The following abbreviations are used in the text of this manual.

C centigrade

F Fahrenheit

Hz hertz

in. inch

kbytes thousand bytes

m meter

mA milliamperes

Mbytes million bytes

mm millimeter

µsec microsecond

nsec nanosecond

sec second

V volts

VAC Volts Alternating Current

W watt

Contents

Chapter 1

Description of the GPIB-100A.......................................................................................1-1

Introduction......................................................................................................................1-1

GPIB-100A Specifications.............................................................................................. 1-3

Chapter 2

Installation.............................................................................................................................2-1

Inspection.........................................................................................................................2-1

Power Connection............................................................................................................ 2-1

Grounding Configuration.................................................................................................2-2

Disassembly........................................................................................................2-2

Mounting.........................................................................................................................2-2

Connecting to Hewlett-Packard Controllers.....................................................................2-2

Chapter 3

Configuration and Operation..........................................................................................3-1

Operating Modes.............................................................................................................3-1

Talker/Listener/Controller (TLC) Mode............................................................... 3-1

Talker/Listener (TL) Mode................................................................................... 3-2

Setting the Operating Mode................................................................................. 3-2

Parallel Poll Response (PPR) Modes............................................................................... 3-2

Buffered PPR Mode (Approach 1)......................................................................3-3

Unbuffered PPR Mode (Approach 2)..................................................................3-3

Mixed Mode Operation....................................................................................................3-4

Operating the GPIB-100A System.................................................................................. 3-4

Chapter 4

Theory of Operation........................................................................................................... 4-1

Diagrams.........................................................................................................................4-1

Power-On........................................................................................................................4-1

System Controller Detection............................................................................................ 4-2

Active Controller Detection.............................................................................................. 4-2

Source Handshake Detection........................................................................................... 4-2

Parallel Polling.....................................................................................................4-3

Data Direction Control......................................................................................... 4-4

EOI..................................................................................................................................4-4

Contents

GPIB-100A User Manual viii © National Instruments Corporation

Appendix A

Operation of the GPIB....................................................................................................... A-1

History of the GPIB.........................................................................................................A-1

Types of Messages..........................................................................................................A-1

Talkers, Listeners, and Controllers...................................................................................A-1

System Controller and Active Controller.........................................................................A-2

GPIB Signals................................................................................................................... A-2

Data Lines........................................................................................................................A-3

Handshake Lines.............................................................................................................. A-3

NRFD (not ready for data)................................................................................... A-3

NDAC (not data accepted)................................................................................... A-4

DAV (data valid)................................................................................................. A-4

Interface Management Lines............................................................................................ A-4

ATN (attention)....................................................................................................A-4

IFC (interface clear).............................................................................................A-4

REN (remote enable)........................................................................................... A-4

SRQ (service request).......................................................................................... A-4

EOI (end or identify)........................................................................................... A-4

Physical and Electrical Characteristics.............................................................................A-5

Configuration Restrictions............................................................................................... A-7

Appendix B

Schematic Diagram............................................................................................................B-1

Appendix C

GPIB-100A Parts Locator Diagram.............................................................................C-1

Appendix D

Cable Assembly Wire List...............................................................................................D-1

Appendix E

Multiline Interface Messages.........................................................................................E-1

Appendix F

Mnemonics Key....................................................................................................................F-1

Contents

Figures

Figure 1-1. The Model GPIB-100A Bus Extender..................................................................1-1

Figure 1-2. Typical GPIB-100A Extension System (Physical Configuration)........................1-2

Figure 1-3. Typical GPIB-100A Extension System (Logical Configuration).......................... 1-2

Figure 2-1. Voltage Selection....................................................................................................2-1

Figure 3-1. Switch Settings for Operating Mode......................................................................3-2

Figure 3-2. Switch Settings for Parallel Poll Response Mode...................................................3-4

Figure 4-1. GPIB-100A Block Diagram...................................................................................4-1

Figure A-1. GPIB Cable Connector..........................................................................................A-3

Figure A-2. Linear Configuration of the GPIB Devices............................................................A-5

Figure A-3. Star Configuration of GPIB Devices.....................................................................A-6

Figure C-1. GPIB-100A Parts Locator Diagram...................................................................... C-1

Tables

Table 1-1. System Configuration Characteristics......................................................................1-3

Table 1-2. Performance Characteristics.....................................................................................1-4

Table 1-3. Operating Characteristics.........................................................................................1-4

Table 1-4. Electrical Characteristics..........................................................................................1-5

Table 1-5. Environmental Characteristics.................................................................................1-5

Table 1-6. Physical Characteristics............................................................................................1-6

Table 1-7. Components and Accessories..................................................................................1-6

Table D-1. Cable Assembly Wire List......................................................................................D-1

Chapter 1

Description of the GPIB-100A

Introduction

The high-speed GPIB-100A Bus Extender (Figure 1-1) is used in pairs with a special parallel data

transmission cable to connect two separate GPIB or IEEE-488 bus systems in a functionally

transparent manner.

Figure 1-1. The Model GPIB-100A Bus Extender

While the two bus systems are physically separate, as shown in Figure 1-2, devices logically

appear to be located on the same bus as shown in Figure 1-3. Thus, with the GPIB-100A it is

possible to overcome two configuration restrictions imposed by ANSI/IEEE Standard 488-l978,

namely:

• Cable length limit of 20 m total per contiguous bus or 2 m times the number of devices on the

bus, whichever is smaller.

• Electrical loading limit of 15 devices per contiguous bus.

Each GPIB-100A system extends the distance limit by 300 m and the loading limit to 30 devices

including the extenders, without sacrificing speed or performance. These point-to-point extender

systems can be connected in series for longer distances or in star patterns for additional loading.

At short distances, the data transfer rate over the extension can exceed 250 kbytes/sec, degrading

with distance only by the propagation delay along the cable. Furthermore, regardless of the

distance, there is no speed degradation at all for transfers between devices on the same side of the

Tabla de contenidos

Otros manuales de Hardware de red de National Instruments

National Instruments

National Instruments FIELDPOINT FP-1600 Manual de usuario

National Instruments

National Instruments NI Vision CVS-1450 Series Manual de usuario

National Instruments

National Instruments FIELDPOINT cFP-PWM-520 Manual de usuario

National Instruments

National Instruments PXI-1000 Manual de usuario

National Instruments

National Instruments Compact FieldPoint cFP-21 Series Manual de usuario

National Instruments

National Instruments NI Vision CVS-1454 Manual de usuario

National Instruments

National Instruments GPIB GPIB-ENET/100 Manual de usuario

National Instruments

National Instruments Fieldbus Manual de usuario

National Instruments

National Instruments RM-4339 Manual

National Instruments

National Instruments NI-9206 Manual de usuario

National Instruments

National Instruments PXI PXITM -1000 Manual de usuario

National Instruments

National Instruments SCXI-1163 Manual de usuario

National Instruments

National Instruments SCB-68 Manual de usuario

National Instruments

National Instruments PXIe-5663E Manual de usuario

National Instruments

National Instruments PXI Terminal Block NI TB-2708 Manual de usuario

National Instruments

National Instruments NI 9203 Manual de usuario

National Instruments

National Instruments 2806 Manual de usuario

National Instruments

National Instruments FieldPoint cFP-20 Series Manual de usuario

National Instruments

National Instruments SCXI-1120 Manual de usuario

National Instruments

National Instruments GPIB-120A Manual de usuario

National Instruments

National Instruments NI PXI-7831R Manual de usuario

National Instruments

National Instruments FieldPoint cFP-RTD-122 Manual de usuario

National Instruments

National Instruments USB Digitizers NI USB-5132 Manual de usuario

National Instruments

National Instruments VXI-1394 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario