National Instruments M Series Manual de usuario

USER GUIDE

NI USB-621xOEM

M Series USB-6211/6212/6216/6218 OEM Devices

This document provides information about the dimensions, mounting

options, connectors, and other components of the National Instruments

USB-6211 OEM, USB-6212 OEM, USB-6216 OEM, and USB-6218 OEM

devices. It also explains how to modify the USB device name in Microsoft

Windows.

Caution There are no product safety, electromagnetic compatibility (EMC), or

CE marking compliance claims made for the USB-6211/6212/6216/6218 OEM devices.

Conformity to any and all compliance requirements rests with the end product supplier.

Figure 1 shows the USB-6211 OEM and USB-6212/6216/6218 OEM

devices.

Figure 1. USB-621xOEM Devices

Refer to the NI USB-621x Specifications document for

USB-6211/6212/6216/6218 specifications and the NI USB-621x User

Manual for more information about USB-6211/6212/6216/6218 devices.

You can find all documentation at ni.com/manuals.

USB-6211 USB-6212/6216/6218

NI USB-621x OEM User Guide 2 ni.com

Dimensions

Figure 2 shows the dimensions of the USB-6211 OEM device.

Figure 2. USB-6211 OEM Dimensions in Inches (Millimeters)

0.000 (0.00)

0.373 (9.47)

0.000 (0.00)

0.420 (10.66)

1.321 (33.54)

3.022 (76.75)

3.441 (87.40)

2.582 (65.58)

5.372 (136.45)

5.877 (149.28)

6.250 (158.75)

0.373 (9.47)

0.489 (12.42)

Ø 0.130 (3.30)

3X Ø 0.142 (3.61)

3.441 (87.40)

3.101 (78.77)

1.958 (49.72)

0.420 (10.66)

3.022 (76.75)

1.484 (37.68)

1.321 (33.54)

Ø 0.144 (Drill Size 27) Recommended

Front Panel Hole Cutout for LED

0.091 (2.31)

0.000 (0.00)

0.433 (11.00)

0.063 (1.60)

0.516 (13.11)

©National Instruments Corporation 3 NI USB-621x OEM User Guide

Figure 3 shows the dimensions of the USB-6212/6216/6218 OEM device.

Figure 3. USB-6212/6216/6218 OEM Dimensions in Inches (Millimeters)

0.091 (2.31)

0.000 (0.00)

0.373 (9.47)

0.000 (0.00) 0.000 (0.00)

0.420 (10.66)

1.321 (33.54)

3.022 (76.75)

3.441 (87.40)

0.433 (11.00)

2.582 (65.58)

5.372 (136.45)

5.877 (149.28)

6.250 (158.75)

0.063 (1.60) 0.516 (13.11)

0.373 (9.47)

0.489 (12.42)

Ø 0.130 (3.30)

3X Ø 0.142 (3.61)

3.441 (87.40)

3.101 (78.77)

1.958 (49.72)

0.420 (10.66)

3.022 (76.75)

1.484 (37.68)

1.321 (33.54)

0.340 (8.64)

Ø 0.144 (Drill Size 27) Recommended

Front Panel Hole Cutout for LED

NI USB-621x OEM User Guide 4 ni.com

I/O Connector Pinouts

Refer to the NI USB-621x User Manual at ni.com/manuals for more

information about USB-6211/6212/6216/6218 signals and how to connect

them.

Figure 4 shows the connector pinout on the USB-6211 OEM device.

Figure 4. USB-6211 OEM Connector Pinout

AI GND

AI 7

AI 14

AI GND

AI 5

AI 12

AI GND

AI 3

AI 10

AI GND

AI 1

AI 8

AI GND

AO 1

AO 0

D GND

+5 V

AI 15

AI 6

AI 13

AI 4

AI 11

AI GND

AI 2

AI GND

AI 9

AI GND

AI 0

AI SENSE

AI GND

AO GND

PFI 7/P1.3 (Out)

PFI 6/P1.2 (Out)

PFI 5/P1.1 (Out)

PFI 4/P1.0 (Out)

PFI 3/P0.3 (In)

PFI 2/P0.2 (In)

PFI 1/P0.1 (In)

PFI 0/P0.0 (In)

+5 V

NC = No Connect

©National Instruments Corporation 5 NI USB-621x OEM User Guide

Figure 5 shows the connector pinouts on the USB-6212 OEM and

USB-6216 OEM devices.

Figure 5. USB-6212/6216 OEM Connector Pinout

D GND

+5 V

P0.15

P0.13

P0.12

P0.10

P0.9

P0.8

P0.7

P0.14

P0.11

P0.6

P0.5

P0.4

P0.3

P0.2

P0.1

P0.0

PFI 15/P2.7

PFI 14/P2.6

PFI 13/P2.5

PFI 11/P2.3

PFI 10/P2.2

PFI 9/P2.1

PFI 8/P2.0

+5 V

AI GND

AI 7

AI 14

AI GND

AI 5

AI 12

AI GND

AI 3

AI 10

AI GND

AI 1

AI 8

AI GND

AO 1

AO 0

D GND

+5 V

AI 15

AI 6

AI 13

AI 4

AI 11

AI GND

AI 2

AI GND

AI 9

AI GND

AI 0

AI SENSE

AI GND

AO GND

PFI 7/P1.7

PFI 6/P1.6

PFI 5/P1.5

PFI 4/P1.4

PFI 3/P1.3

PFI 2/P1.2

PFI 1/P1.1

PFI 0/P1.0

+5 V

NC = No Connect

PFI 12/P2.4

NI USB-621x OEM User Guide 6 ni.com

Figure 5 shows the connector pinouts on the USB-6218 OEM device.

Figure 6. USB-6218 OEM Connector Pinout

Note In non-referenced single-ended (NRSE) mode, the USB-6218 OEM device

measures AI <0..15> relative to the AI SENSE input, and AI <16..35> relative to

AI SENSE 2.

AI GND

AI 23

AI 30

AI GND

AI 21

AI 28

AI GND

AI 19

AI 26

AI GND

AI 17

AI 24

AI GND

D GND

+5 V

AI 31

AI 22

AI 29

AI 20

AI 27

AI GND

AI 18

AI GND

AI 25

AI GND

AI 16

AI SENSE 2

AI GND

PFI 15/P1.7 (Out)

PFI 14/P1.6 (Out)

PFI 13/P1.5 (Out)

PFI 11/P0.7 (In)

PFI 10/P0.6 (In)

PFI 9/P0.5 (In)

PFI 8/P0.4 (In)

+5 V

NC = No Connect

AI GND

AI 7

AI 14

AI GND

AI 5

AI 12

AI GND

AI 3

AI 10

AI GND

AI 1

AI 8

AI GND

AO 1

AO 0

D GND

+5 V

AI 15

AI 6

AI 13

AI 4

AI 11

AI GND

AI 2

AI GND

AI 9

AI GND

AI 0

AI SENSE

AI GND

AO GND

PFI 7/P1.3 (Out)

PFI 6/P1.2 (Out)

PFI 5/P1.1 (Out)

PFI 4/P1.0 (Out)

PFI 3/P0.3 (In)

PFI 2/P0.2 (In)

PFI 1/P0.1 (In)

PFI 0/P0.0 (In)

+5 V

NC = No Connect

PFI 12/P1.4 (Out)

©National Instruments Corporation 7 NI USB-621x OEM User Guide

Board Mounting the USB-621xOEM

The USB-621xOEM device can be mounted on a motherboard using the

50-pin connector(s) and board mount socket(s), as shown in Figures 7

and 8.

Note You can use either one or both 50-pin connectors to board mount the

USB-6212/6216/6218 OEM device.

Figure 7. USB-621xOEM Mounting Using 50-Pin Connectors

(USB-6218 OEM Device Shown)

Figure 8. USB-621xOEM Device Installed on Motherboard

(USB-6218 OEM Device Shown)

Refer to the Device Components section for more information about

mounting components.

1Mounting Standoff

2Board Mount Socket

350-Pin Connector

4USB-6218OEM Device

5Mounting Screws

NI USB-621x OEM User Guide 8 ni.com

Device Components

Table 1 contains information about the components used for interfacing

and interacting with the USB-621xOEM device.

Modifying the USB Device Name in Microsoft Windows

You can change how the USB-621xOEM device name appears when users

install the device in both the Found New Hardware Wizard that appears

when the device is initially installed and in the Windows Device Manager.

Windows Vista/XP Users

Figure 9 depicts how a USB-6211 (OEM) device name appears in the

Found New Hardware Wizard and Windows Device Manager.

Table 1. USB-621xOEM Components

Component

Reference

Designator(s)

on PCB Manufacturer

Manufacturer

Part Number

50-pin connector J6*, J7 3M N2550-6002UB

USB connector J5 AMP 787780-1

50-pin board mount socket†— 3M 8550-4500PL (or equivalent)

Mounting standoff,

using board mount socket

—RAF Electronic

Hardware

M1261-3005-SS‡

with M3 ×0.5 screw

Mounting standoff,

using ribbon cable

—RAF Electronic

Hardware

2053-440-SS**

with 4-40 screw

*J6 is available on USB-6212/6216/6218 OEM devices only.

†You can use either one or both 50-pin connectors to board mount the USB-6212/6216/6218 OEM device.

‡3/16 in. HEX female-to-female, 14 mm long.

** 3/16 in. HEX female-to-female, 1/4 in. long.

©National Instruments Corporation 9 NI USB-621x OEM User Guide

Figure 9. USB-6211 OEM Device in the Found New Hardware Wizard

and Device Manager (Windows Vista/XP)

To modify the device name in the Found New Hardware Wizard and

Windows Device Manager in Microsoft Windows Vista/XP, complete the

following steps.

Note You must have NI-DAQmx 8.6 or later installed on your PC.

1. Locate the OEM

.inf file in the

:\WINDOWS\inf\ directory, where

is the random number assigned to the INF file by Windows, and

:\ is the root directory where Windows is installed.

Note New security updates to Microsoft Vista and NI-DAQ 8.6 create random INF files

for NI hardware. Windows assigns random file numbers to all INF files, which causes the

user to search through several INF files until the correct file is located.

If you want to revert back, save a copy of this file as

OEM

_original.inf in a different location.

NI USB-621x OEM User Guide 10 ni.com

2. Edit the device INF file by opening OEM

.inf with a text editor.

At the bottom of this file are the descriptors where Windows looks to

identify the device. Locate the two lines of text that contain in quotes

the descriptors for the device name you are modifying. Change the

descriptor on both lines to the new device name, as shown in Figure 10.

Figure 10. INF File Descriptors Changed to “My Device” (Windows Vista/XP)

3. Save and close the INF file.

4. Go to the Windows Device Manager.

(Windows Vista) In the Device Manager, notice that the OEM device

now appears as My Device, as shown in Figure 11.

(Windows XP) In the Device Manager, right-click the OEM device under

Data Acquisition Devices, and select Uninstall. Disconnect the USB

cable from your PC.

When you reconnect the device, it appears as My Device in the Found New

Hardware Wizard and Windows Device Manager, as shown in Figure 11.

Note When the device is initially installed, the Windows alert message may display the

following: Found New Hardware: M Series USB 621

(OEM). This message appears

for a few seconds until the custom name appears and the Found New Hardware Wizard is

launched. This alert message device name cannot be changed.

Original File

Modified File

Otros manuales para M Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de E/S de National Instruments

National Instruments

National Instruments NI USB-6008 Manual de usuario

National Instruments

National Instruments NI 9269 Manual

National Instruments

National Instruments 9753 Manual de usuario

National Instruments

National Instruments PCIe-7856 Manual de usuario

National Instruments

National Instruments PXIe-7865 Manual

National Instruments

National Instruments PXIe-7862R Manual de usuario

National Instruments

National Instruments NI 9375 Manual de usuario

National Instruments

National Instruments USB-9265 Manual de usuario

National Instruments

National Instruments NI USB-6008 Manual de usuario

National Instruments

National Instruments 9229 Manual de usuario

National Instruments

National Instruments sbRIO-9218 Manual de usuario

National Instruments

National Instruments PXIe-7822 Manual de usuario

National Instruments

National Instruments PXI-8211 Manual de usuario

National Instruments

National Instruments PXI-7830R Manual de usuario

National Instruments

National Instruments NI 9226 Manual

National Instruments

National Instruments NI 9411 Manual de usuario

National Instruments

National Instruments FieldPoint FP-AI-112 Manual de usuario

National Instruments

National Instruments NI-9232 Manual de usuario

National Instruments

National Instruments sbRIO-9229 Manual de usuario

National Instruments

National Instruments AT-MIO-16 Manual de usuario

National Instruments

National Instruments cRIO-9075 Manual de usuario

National Instruments

National Instruments NI 6115 Manual de usuario

National Instruments

National Instruments R Series Manual de usuario

National Instruments

National Instruments FieldPoint FP-1300 Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario