National Instruments PXI-8109 Manual de usuario

INSTALLATION GUIDE

NI PXI-8109 and NI PXIe-8133

Flex Cable Replacement

This guide describes how to install the flex cable replacement for the

NI PXI-8109 and NI PXIe-8133 embedded controllers. For more detail and

a video demonstration of the cable replacement, please visit ni.com/info

and enter the Info Code 8133FlexReplace.

The flex cable can be replaced by hand. No tools are needed and the

controller does not need to be disassembled. Perform the following steps

for installation and removal instructions.

1. Locate the single-ended board to board flex cable on your

NI PXI-8109 or NI PXIe-8133 embedded controller as shown below in

Figure 1.

Figure 1. View of the Controller Back End with Board to Board Flex Cable

Caution Touch the metal part of the case to discharge any static electricity that might be

on your clothes or body.

1 Board to Board Flex Cable

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle

logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at

ni.com/trademarks for other National Instruments trademarks. Other product and company

names mentioned herein are trademarks or trade names of their respective companies. For patents

covering National Instruments products/technology, refer to the appropriate location: Help»Patents

in your software, the patents.txt file on your media, or the National Instruments Patent Notice

at ni.com/patents. Refer to the Export Compliance Information at ni.com/legal/

export-compliance for the National Instruments global trade compliance policy and how to

obtain relevant HTS codes, ECCNs, and other import/export data.

*325798A-01*

2. Remove the existing cable by completing steps a and b below.

Caution Do not put pressure on additional components near the connector or scrape the

connector against components while removing the cable.

a. Gently remove by hand (no tools necessary) both sides of the

cable from the mating connectors on the two boards of the

controller.

1. Disconnect one side of the flex cable from its mating

connector.

2. Straighten the cable after disconnecting the first side.

3. Disconnect the second side of the flex cable from its mating

connector.

b. Discard the old cable.

3. Install the new cable.

a. The replacement cable will be flattened when it arrives.

b. Each connector is keyed in a way to prevent improper installation.

c. Connect one side of the new flex cable to the appropriate keyed

connector on the controller.

d. Slowly bend the cable using large angles such that the second flex

cable connector is above the mating connector on the controller,

and make the connection.

Caution Tight bends or creases in the cable will damage its functionality.

e. Once both sides of the cable are in place apply moderate pressure

on both sides to ensure a good connection. Do not push on other

components in the process. You may need to gently push the

middle of the cable toward the inside of the controller to square up

the connectors on the board.

4. Verify the cable is installed correctly.

a. Install the controller into a chassis.

b. Power on the chassis.

c. Verify the controller boots properly.

Otros manuales para PXI-8109

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Controladores de National Instruments

National Instruments

National Instruments sbRIO-9637 Manual de usuario

National Instruments

National Instruments AT-GPIB/TNT Manual de usuario

National Instruments

National Instruments VXIpc 600 Series Manual de usuario

National Instruments

National Instruments IC-3121 Manual de usuario

National Instruments

National Instruments NI cRIO-9036 Manual de usuario

National Instruments

National Instruments cRIO-9030 Manual de usuario

National Instruments

National Instruments sbRIO-9638 Manual de usuario

National Instruments

National Instruments NI SCXI 1357 Manual de usuario

National Instruments

National Instruments sbRIO-9628 Manual de usuario

National Instruments

National Instruments NI PXI-8104 Manual de usuario

National Instruments

National Instruments IC-3120 Manual de usuario

National Instruments

National Instruments CompactRIO cRIO-9072 Manual de usuario

National Instruments

National Instruments NI PXIe-8840 Manual de usuario

National Instruments

National Instruments GPIB-232CT-A IBCL EPROM Manual de usuario

National Instruments

National Instruments CompactRIO cRIO-9066 Manual de usuario

National Instruments

National Instruments PXI-8231 Manual de usuario

National Instruments

National Instruments IC-3173 Manual de usuario

National Instruments

National Instruments NI 9514 Manual de usuario

National Instruments

National Instruments PCI-7342 Manual de usuario

National Instruments

National Instruments CMS-9068 Instrucciones de montaje

National Instruments

National Instruments NI-488.2M Manual de usuario

National Instruments

National Instruments IC-3120 Manual de usuario

National Instruments

National Instruments RT Series Manual de usuario

National Instruments

National Instruments FlexRIO NI-7931R Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario