Nat ASM73 Manual de usuario
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
SM73
AA30-0xx
Expansion Switches
INSTALLATION AND OPERATION MANUAL
REV 4.00 September 18, 2006
Northern Airborne Technology Ltd.
1925 Kirschner Road
Kelowna, BC, Canada.
V1Y 4N7
Telephone (250) 763-2232
Facsimile (250) 762-3374
Copyright 2006 by Northern Airborne Technology
SM73 Rev. 4.00 AA30-0xx Expansion Switches Manual
Sep 18, 2006 Page ii
ENG-FORM: 820-0110.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
Periodically NAT will release manual amendments. In order to maintain the most
accurate and up to date manual these amendments should be carried out immediately
upon receipt and recorded on the following amendment record.
AMENDMENT RECORD
Amendment
Number
Amendment
Date
Section(s)
Changed
Date
Entered
Entered By
Note: Revision 4.00 is the first public release of this document
Insert any Amendment Instruction sheets after this page.
SM73 Rev. 4.00 AA30-0xx Expansion Switches Manual
Sep 18, 2006 Page iii
ENG-FORM: 820-0110.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
Table of Contents
Section Title Page
1 Description
1.1 Introduction 1-1
1.2 Purpose of Equipment 1-1
1.3 Features 1-1
1.4 Specifications 1-1
1.4.1 Electrical Specifications 1-1
1.4.2 Physical Specifications 1-2
2 Installation
2.1 Introduction 2-1
2.2 Unpacking and Inspection 2-1
2.2.1 Warranty 2-1
2.3 Installation Procedures 2-1
2.3.1 Warnings 2-1
2.3.2 Cautions 2-2
2.3.3 Cabling and Wiring 2-2
2.3.4 Post-Installation Checks 2-2
2.3.5 Adjustments 2-3
2.4 Continued Airworthiness 2-3
2.5 Accessories Required But Not Supplied 2-3
2.6 Installation Drawings 2-4
3 Operation
3.1 Introduction 3-1
3.2 General 3-1
3.3 Controls and Indicators 3-1
3.3.1 Transmit Selector 3-1
3.3.2 Receive Audio Switches 3-1
SM73 Rev. 4.00 AA30-0xx Expansion Switches Manual
Section 1 Description
1.1 Introduction
This manual contains general information on the AA30-0xx Expansion Switches. There
are many different variants of the AA30-0xx available; in this manual the AA30-013 is
described as an example of a single user unit, and the AA30-014 as an example of a
dual user unit. All derivative products will be covered by manual supplements, which
can be obtained from NAT as required.
Information in this section consists of purpose of equipment, features and specifications.
1.2 Purpose of Equipment
The AA30-013 is a single-position expansion switch, and the AA30-014 is a dual-
position expansion switch. Both provide transmit capability.
1.3 Features
The AA30-013 is a compact Dzus mounted switch expansion unit that provides
expansion for one user and contains only one board. The AA30-014 is a compact Dzus
mounted switch expansion unit that provides independent expansion for two users,
using two identical circuit boards.
The transmit function allows each user to select one of three transceivers (or two
transceivers and intercom). Receive audio can be selected regardless of the transmit
selector switch position.
1.4 Specifications
1.4.1 Electrical Specifications
Power Supply No internal power supply
Input Signals
+28 Vdc Power (AA30-014 only)
Operating Voltage Nominal 27.5 Vdc
Minimum 17.0 Vdc
Maximum 35.5 Vdc
Input Current 50 mA Max @ 27.5 Vdc
Backlight Power (may be connected to one or both connectors on AA30-014)
Sep 18, 2006 Page 1-1
ENG-FORM: 800-0108.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
AA30-0xx Expansion Switches Manual SM73 Rev. 4.00
Voltage 28 Vdc
Return Lights Ground
Mic: Quantity 1 per user
Circuitry Type Single Ended
Keyline: Quantity 1 per user
Active State Low (A/C ground)
RX Audio: Quantity 3 per user
Circuitry Type Single Ended
Output Signals
Mic: Quantity 3 per user
Circuitry Type Single Ended
Keyline: Quantity 3 per user
Active State Low (A/C ground)
Phones: Quantity 1 per user
Circuitry Type Single Ended
1.4.2 Physical Specifications
Height 1.14" (29.0 mm) max
Depth behind panel 5.82" (147.8 mm) max (including connectors)
Width behind panel 4.92" (125.0 mm) max wide
Weight AA30-013 0.70 lbs (0.32 kg) max
AA30-014 0.95 lbs (0.43 kg) max
Mounting Dzus rail
Faceplate Acrylic edge-lit panel
Material/Finish Chassis and cover are 5052-H32 brushed
aluminum with chromate conversion finish.
Connectors One (AA30-013) or two (AA30-014) male 25-pin
D-subminiature connectors with jackposts.
End of section 1
Page 1-2 Sep 18, 2006
ENG-FORM: 800-0108.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
SM73 Rev. 4.00 AA30-0xx Expansion Switches Manual
Section 2 Installation
2.1 Introduction
Information in this section consists of: unpacking and inspection procedures, installation
procedures, post-installation checks, and installation drawings.
2.2 Unpacking and Inspection
Unpack the equipment carefully and locate the warranty card. Inspect the unit visually
for damage due to shipping and report all such claims immediately to the carrier
involved. Note that each unit should have the following:
- AA30-0xx Expansion Switch
- Warranty Card
- Operator’s Manual
- Release certification
Verify that all items are present before proceeding and report any shortage immediately
to your supplier.
2.2.1 Warranty
Complete the warranty card information and send it to NAT when the installation is
complete. If you fail to complete the warranty card, the warranty will be activated on
date of shipment from NAT.
Note: An appropriately rated facility, e.g. Certified Aircraft Repair Station, must install
this equipment in accordance with applicable regulations. NAT Ltd’s warranty is
not valid unless the equipment is installed by an authorized NAT Dealer. Failure
to follow any of the installation instructions, or installation by a non-certified
individual or agency will void the warranty, and may result in a non-airworthy
installation.
2.3 Installation Procedures
2.3.1 Warnings
Do not bundle any lines from this unit with transmitter coax lines. Do not bundle any
audio or DC power lines from this unit with 400 Hz synchro wiring or AC power lines. Do
not position this unit or wiring from this unit next to any device with a strong alternating
magnetic field such as an inverter, or significant audio interference will result.
Sep 18, 2006 Page 2-1
ENG-FORM: 805-0107.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
AA30-0xx Expansion Switches Manual SM73 Rev. 4.00
2.3.2 Cautions
In all installations, use shielded cable exactly as shown and ground as indicated.
Significant ground loop and noise problems may result from not following these
guidelines.
The shielding and routing of the MIC LINES used in the AA30-0xx installation is very
critical and poor performance of the aircraft audio system will result if these issues are
not handled properly.
2.3.3 Cabling and Wiring
All unshielded wire shall be selected in accordance with AC43.13-1B Change 1,
Paragraphs 11-76 through 11-78. Wire types should be to MIL-W-22759 as specified in
AC43.13-1B Change 1, Paragraphs 11-85, 11-86, and listed in Table 11-11. For
shielded wire applications, use Tefzel MIL-C-27500 shielded wire with solder sleeves
(for shield terminations) to make the most compact and easily terminated interconnect.
Follow the wiring diagrams in Section 2.6 as required.
Allow 3 inches from the end of the wire to the shield termination to allow the hood to be
easily installed. Note that the hood is a ‘clamshell’ hood, and is installed after the wiring
is complete.
All wiring should be at least 22 AWG, except power and ground lines, which should be
at least 20 AWG. Ensure that all ground connections are clean and well secured.
2.3.4 Post-Installation Checks
2.3.4.1 AA30-013 Voltage/Resistance Checks
Check the following:
a) P101 pin <9> for +28 Vdc lighting buss voltage.
b) P101 pin <22> and <24> for continuity to ground.
2.3.4.2 AA30-014 Voltage/Resistance Checks
Check the following:
a) P101 and P102 pins <7> for +28 Vdc avionics buss voltage.
b) P101 and P102 pins <9> for +28 Vdc lighting buss voltage (only one required).
c) P101 and P102 pins <22> and <24> for continuity to ground.
d) P101 and P102 pins <11> for continuity to ground when keyed.
Page 2-2 Sep 18, 2006
ENG-FORM: 805-0107.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cambiar de Nat
