Mychway HARI Manual de usuario

HARI REMOVAL BEAUTY MACHINE

----- manual

Product Description

This machine is Semi conductor Hair removal series ,which used the TEC and Cooling

Technology of Sapphire Epidermis.The laser beam is based on high performance

patented light shaping technology,which can be applied to white skin to light brown

skin with dark black hair.

Before operating ,Please carefully read and strictly operate the machine according to

guidelines in manual .

Working Theory

Process:808nm laser acting on Skin - Melain of follicle absorbs laser caused heat

increased sharptly to distroy follicle - Achieving the effect of permanent Hair removal

Hair follicles and hair shafts are rich in melanin, which is distributed between hair

bulb stromal cells. 。Sem iconductor laser hair removal applicates specific

wavelength laser,of 808nm ,a the target of melanin, selectively acting on the hair

follicle, causing its temperature to rise sharply, destroying the hair follicle and its

surrounding tissues, thereby destroying the hair growth center on which the hair

grows.After absorption of laser light, melanin selectively destroys hairy cells due

to photothermal effect, fundamentally terminates hair growth and achieves

permanent hair loss reduction effect, not only avoiding damage to surrounding

normal tissues, but also shrinkd the pore which always worrying people.. Making

skin become smooth and flawless

The effective penetration depth of 808nm wavelength can reach the target tissue

(hair nipple). The appropriate pulse duration ensures that the target tissue

produces enough thermal damage and the surrounding tissue is almost

unaffected; the proper amount of energy density guarantees sufficient time in a

suitable time. The energy output is sufficient to damage the target tissue and the

normal tissue is almost unaffected; suitable epidermal protection measures

ensure adequate damage to the target tissue, while the epidermis is almost

unaffected, thus ensuring the safety of treatment;

On the basis of meeting the above design requirement ,808nm lase hair removal

used the multi-pulse laser by special design to heat hair follicle to 48℃under the

lower energy desity pattern,and keeping a period time(10Hz state) by sliding of

treatment tool ,which makes stem cells lost their growth actvity,thus achieving

permanent hair removal.

755+1064NM+808NM Diode laser

Note: 755/1064 NM (Optional)

Treatment range

Hair of various parts of the body, such as: the hairline of the face, lip hair; beard

and body hair, chest hair; limb hair, bikini hair, etc.;

Steps

1. Clean the treatment site, take photos before surgery, shave the hair with long

hair, leave a little hair root, do not completely scrape it;

2. Select the appropriate wavelength and treatment head according to the

treatment item, and select appropriate parameters according to the color depth

of the customer's lesion tissue and the skin condition of the customer;

3. Select the corresponding skin color according to the customer's skin color on

the operation interface, and then select the energy parameter according to the

customer's pain and hair thickness, apply a gel at the treatment site, and operate

with a sliding method;

4, the clinical end point is recommended: smell the hair burnt, the hair is rolled up,

part of the hair roots are reddish;

5, after the treatment is completed, postoperative attention.

Excellent

Cooling system

Parameter setting:

Parameter setting reference

Part

Intensity

Frequency

upper lip

20-30

1-2

Underarm

20-30

1-2

Limbs

30-45

Bikini

20-30

1-2

hairline

18-25

1-2

beard

18-25

1-2

Note:it is also based on skin color

Technical parameter

Laser heat dissipation form

semiconductor refrigeration + water + air

cooling

constant temperature cooling

Laser type

Triple wavelenth diode laser

755nm+808nm+1064nm mixed

wavelength

Laser wavelength

755nm+808nm+1064nm

Pulse width

0-600ms

Frequency

1Hz-10Hz

Max power

100J/ cm²

Light outlet

10mm*10mm/

15mm*15mm,20mm*20mm

Cooling temperature:

-10°C to 10°C by cooled sapphire

Water flow

8L/min

LCD screen

10.4’ Touch LCD

water tank

Built-in water tank

Input voltage

220VAC / 50-60Hz(110VAC can be

customized )

lWith Macro Channel

Handle Power

300W,500W, 600W,1000W

Machine power

1500W

Handle shots

20,000,000 shots

Languages

With 8 languages optional.

Safety considerations

According to the air transportation regulations, the water in the instrument must

be emptied, and the user should add water after receiving theinstrument;

Make sure the tank is filled with distilled water.It is forbidden to turn on the

machine without water, so the damaged bald head should be borne by the user.

Mineral water or tap water is prohibited and deionized water (distilled water) is

required.

Regular replacement of cooling water every week （According to the quality of

water quality, the water exchange period can be extended or shortened as

appropriate.）；

Check that the handle is good and check the protective sleeve of the handle to

make sure the sleeve is not bent or pressed.If the casing is seriously compressed,

it will cause water blockage or insufficient water flow, which is not conducive to

the cooling of the instrument, and may cause problems.

Before using, first check if the line is connected correctly;

Make sure rated voltage conform to the voltage in yourcountry

Treatment bald head should be placed on bald fixture when not in use. Hand-held

operation should pay attention to protection, so as to avoid bald head falling.

After the machine starts, the water system will be circulated for one minute

before operation, so that the water system can be completelycirculated.

Treatment of the bald head is strictly prohibited to directly illuminate eyes

Cold gel must be added during operation. The treatment head must be lightly

applied to the skin. Do not leave the skin during treatment to avoid burning the

skin.

[Warning instructions]

The strong light hazard prompt refers to the treatment of strong light emitted

from the front of the bald head to illuminate the eyes, which is prone to danger;

the operator is required to wear a protective goggle during operation and protect

the operator from direct exposure to the human eye.

The instrument water tank must be filled with water before use.

When different functions need to be replaced or different parameter options

need to be adjusted, the machine should be in standby state, and the function or

parameter options can not be replaced in the ready state.

[Declaration]: Low temperature area below 0℃

If the instrument is not used for a long time or needs to change the site, the water

in the interior (handle and main engine) must be emptied.

Try not to place the instrument for more than 3 hours in an environment below

0℃.It has been found that water below 0℃will appear to be tumbling up when

moving.It is realized that the liquid water is below 0 ℃, and there will be rapid

freezing during the movement.After the liquid water turns into solid ice, the

volume increases rapidly, causing certain damage to components such as water

pipes, cooling water pipes, and laser waterways.

After the customer receives the instrument, it needs to be stationary for 24 hours

in the room temperature of 23-26 ℃before it can be used.if the equipment is not

operated as required,and it is damaged due to the customer's own reasons, the

company will only provide paid maintenance services. Because

of the influence of temperature, we hope that customers will pay attention to it.

And follow the requirements for routine maintenance.

Operation instructions

Instrument assembly

（Remarks: It is required to change the water once every 15 days. Clean the water

tank when changing water, and ask to replace Watson's distilled water.，The seriously

consumption caused by water quality and changing the water not frequently）

1、Handle installation：Align the joints first by the wire column，Then press the red

buttons on the both sides to insert the connector ，Finally, buckle the upper and

lower locks.

2、Add distilled water：Add distilled water from the injection port until there is

water flowing out from the overflow port.

Water in

Over follow

port

Water out

Donot close the

water in hole during

treatment

Change the water per

month

3、Power Wire Installation：connect it well with the machine power port。

Screen introduction

一、1、connect well the power supply，Rotate the emergency stop

switch clockwise to bouncing ，Rotate the key clockwise

，Startthe animation automatically.Automatically jump

to the input password interface after playing the starter animation, as shown in

the figure:

755nm for white skin (fine/ golden hair) hair removal. 808nm for

yellow (natural) skin hair removal.

1064nm for black skin (black hair) hair removal.

Enter the correct password 000000 and press enter button to enter the operation

interface.

Tabla de contenidos

Otros manuales de Producto de cuidado personal de mychway

mychway

mychway MS-1161 Manual de usuario

mychway

mychway MS-21Y4 Manual de usuario

mychway

mychway LT-110D Manual de usuario

mychway

mychway SR-MV5 Manual de usuario

mychway

mychway MS-54W1S Manual de usuario

mychway

mychway MS-54D1S Manual de usuario

mychway

mychway MS-3361 Manual de usuario

mychway

mychway Infrared Body Slimming Wrap Manual de usuario

mychway

mychway OT-AC019F Manual de usuario

mychway

mychway LY-54K3S Manual de usuario

mychway

mychway MS-4481 Manual de usuario

mychway

mychway MS-33J6 Manual de usuario

mychway

mychway SR-M51713 Manual de usuario

mychway

mychway MS-V8008 Manual de usuario

mychway

mychway MS-56S2 Manual de usuario

mychway

mychway HR-BX001 Manual de usuario

mychway

mychway SR-RF52 Manual de usuario

mychway

mychway MS-2173 Manual de usuario

mychway

mychway MS-22P2 Manual de usuario

mychway

mychway MS-1150C Manual de usuario

mychway

mychway MS-54D4S Manual de usuario

mychway

mychway MS-54D1 Manual de usuario

mychway

mychway LS-45D2SB Manual de usuario

mychway

mychway MS-34S1 Manual de usuario

Manuales populares de Producto de cuidado personal de otras marcas

Pretika

Pretika ST102 Manual de instrucciones

Beurer

Beurer FC 76 Manual de usuario

Pebble Grey

Pebble Grey 500.40.70-75 Manual de usuario

PUSH

PUSH ortho Manual de usuario

Dermlite

Dermlite DL3N Manual de usuario

DERMAPEN

DERMAPEN SEMI Manual de usuario

HiB

HiB Spectre 50 Manual de usuario

Carex

Carex SunLite Manual de usuario

Roper Rhodes

Roper Rhodes Intense Manual de lista de piezas

Interacoustics

Interacoustics Titan IMP440 Instrucciones de funcionamiento y seguridad

ReTrak

ReTrak VS001 Manual de usuario

LED Technologies

LED Technologies dpl PAIN RELIEF Joint Wrap Manual de usuario

Casa Lusso

Casa Lusso MVL1000x450PR Manual de usuario

Quoizel

Quoizel QR3326 Instrucciones de montaje

Beurer

Beurer EM 37 Manual de usuario

BERTSCHAT

BERTSCHAT HEATED HOODIE PRO - DUAL HEATING Manual de usuario

ACP

ACP OMNISTAND Manual de usuario

Scarlett

Scarlett VitaSpa SC-CA304PS11 Manual de usuario

mychway HARI Manual de usuario

Manuales populares de Producto de cuidado personal de otras marcas