MyBinding MBM BC12 Manual de usuario

MBM BC12 Twelve Up

Business Card Cutter

Instruction Manual

MULTI CARD CUTTER

Operation Manual

＊Be sure to read this manual to operate the machine safty and properly.

＊Keep the manual in handy place for further reference.

＊Be sure to include this manual with the machine when transferring or

leasing it to another person.

＊The manual is supposed to be changed or renewed without prior notice.

Operation Manual

V.1.0

October 2009

BC-12

MULTI CARD CUTTER

BC-12 Operation Manual

Contents

Introduction······················································································································2

Explanation of Symbols ································································································2

Safety Instructions ·······································································································3-5

Main Specifications ·······································································································6

Accessories ····················································································································6

1. Installation Precautions ···························································································7-8

2. Part Names ·············································································································9-10

3. Composition and Imposition ··············································································11-16

4. Preparations for Operation ··················································································17-18

5. Howto Use ··········································································································19-30

6. Handling of the Trash Box ·····················································································31

7. Power Off ·················································································································31

8. Maintenance ·········································································································32-33

9．Option ·······················································································································34

10. Troubleshooting Q&A ······················································································35-36

Explanation of Symbols

The following safety symbols are used in this operation manual and on the labels attached to the

machine body. Understand each symboland its associated instruction.

Introduction

Thank you for purchasingBC-12.

BC-12 is an automatic cutter that accurately cuts letter-size paper to produce various sizes

of individual cards such as business cards imposed and printed in advance.

This operation manual describes how to obtain the best performance from the machine

and to use it safely without troubles.

Be sure to read this manual before installation and operation, then keep the manual

carefully in a handy place for further reference.

When transferring or leasing this machine to another person, be sure to include this

manual with it.

Prohibited

Must be groundedUnplug

General instruction

Do not expose to

wet conditions

Do not touch

with wet hands

Do not

disassemble

WARNING

Misuse of the machine could cause major injuryor death to the

operator.

Misuse of the machine could cause injury to the operator or damage to

property.

CAUTION

Safety Instructions

Connect the power plug into an outlet rated at 120V.

It is prohibited to connect it to an outlet with manyother plugs connected or to

an auxiliary power outlet. Doing so may generate heat and cause fire or an

electric shock.

It is prohibited to usepower other than the designated one (AC120V).

Doing so could causefireor an electric shock.

Handle the power plug carefully.

1. Do not connect the power plug if foreign matter such as dust is attached.

2. Make sure the plug isproperly inserted into theoutlet.

It is prohibited to use power cords other than the one provided with the

machine.

Do notuse theprovided power cord for other purposes.

Do notdamage the power cord. Doing so could cause fire or an electric shock.

Do notputheavy objects on it, pull it, bend it forcibly, or modify it.

Do notoperate the machine without grounding. Doing so could cause fireor an

electric shock. Be sure to ground the machine.If the outlet is not triplex

(three-pins), be sure to ground it securely using the ground adapter.

Never disassemble the cutter unit.

It is prohibited to connect or disconnect the power plug with wet hands.

Doing so could causean electric shock.

WARNING

Before removing jammed paper,first turn off thepower switch.

To remove a sheet of paper caught in the cutter unit, first release the error, press

the Start Key to disengage the cutter, turn off the power switch, then remove

the sheet.

Do notremove the transparent cover of the trash box. This transparent cover is

part of the cover of the slitter unit.

Do notwet the machinewith water.

Doing so could causefireor an electric shock.

If you notice a strange sound or smell, turn off thepower switch immediately,

disconnect the power plug, then call your dealer for repair.

Otherwise, fire or an electric shock could result.

Never disassemble the slitter unit.

When lifting the machine body, securely hold the bottom plate with both of your

hands. If you grab part of the plastic cover, it may damage the cover and the

machine could fall and cause an injury.

Do notrub your hands on the edges of cutpaper.

Doing so could injure your hands.

Do notuse the machine in dusty or damp conditions.

Doing so could causefireor an electric shock.

CAUTION

Remove the power plug from the outlet when the machine will not beused for a

long time.

When moving the machine, first turn off the power switch and disconnect the

power plug from the outlet.

When installing or removing an optional device, carefully follow the

instructions in the relevant operation manual.

Regularly disconnect the power plug from the outlet and clean the area around

the pins. If the plug is kept connected for a long time, the area around the pins

may become dusty, which could cause a short-circuit and result in fire.

Do notplace the machineon an unstable place.

It may fall down, resulting in an injury.

When disconnecting the power plug, hold the plug and pull it out. Do not pull

on the cord.

Main Specifications

Supported paper size letter-size 11”×8.5” (279.4215.9mm, within ±0.5mm from each side)

Paper thickness 0.13–0.35mm

Paper weight 120–350g/m2

For range 321-350g/m2and 0.31-0.35mm thick, subject to

no-continuous and light-duty use.

Paper feed tray capacity 50 sheets (for 0.2mm-thick paper)

Finished size For the dimensions of paper that can be cut into, see pages 14, 15 and 16.

Card receiving capacity 500 sheets for business cards (for 0.2mm-thick paper)

Product receiving capacity 120 sheets for business cards (for 0.2mm-thick paper)

(50–100 sheets for other types of card)

(It varies depending on the dimensions and type of paper to be cut)

Cutting speed 1 min. 18 sec. for 100 business cards (based on 10-up and single cutting)

Dimensions 750mm (W) 435mm (D) 290mm (H)

Net weight 24kg

Power requirements AC120V, 60Hz

Power input 0.7A max.

Accessories

After unpacking, make sure that the followingaccessories are present.

Other accessories

• Power cord

• Operation manual

• Slitter Cartridge v.s. Cut Mode

Paper feed tray

Product receiver

Trash box

Paper feed tray

fixing thumbscrew

(2 locations)

Machine body

Card receiver

1. Installation Precautions

Recommended operating temperature

range: 10–40°C

It is preferable to use the machine at a

humidity of 50% or higher.

Do not put the

machine on an

unstable surface.

Avoid areas with high moisture, excessive dust,

oily smokeor steam.

Keepthe machine

away from fire or

heatingequipment.

Do not leave the

machine exposed to

direct sunlight for

many hours.

Do not drop the machineor

hit it against something.

Tabla de contenidos

Otros manuales de Cortador de MyBinding

MyBinding

MyBinding DC-545HC Manual de usuario

MyBinding

MyBinding Standard APC45 Programmable Manual de usuario

MyBinding

MyBinding Standard PC II- Manual de usuario

MyBinding

MyBinding Swingline ClassicCut Ingento Manual de usuario

MyBinding

MyBinding IDEAL 4850-95 EP Manual de usuario

MyBinding

MyBinding IDEAL 5221-95EP Manual de usuario

Manuales populares de Cortador de otras marcas

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Manual de usuario

Makita

Makita DCS552 Manual de usuario

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Manual de usuario

Makita

Makita 4112HS Manual de usuario

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Manual de usuario

Hitachi

Hitachi CM 4SB2 Guía de solución de problemas

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Manual de usuario

GCC Technologies

GCC Technologies AFJ-24S Manual de usuario

DeWalt

DeWalt XR LI-ION DCS350N Manual de usuario

Baudat

Baudat ES1 Manual de usuario

Mafell

Mafell ZAF 200 Guía

Makita

Makita 4100NH Manual de usuario

Formax

Formax FD 574 Manual de usuario

EINHELL

EINHELL TE-MA 1500 Manual de usuario

Husqvarna

Husqvarna Cut-n-Break K 760 Manual de usuario

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Manual de usuario

TRI tool

TRI tool 301A Manual de usuario

Roller

Roller King 1 1/4 Manual de usuario