© Munters Corporation , May 2017
4QM1044r5
1.1 Parts List
Unpacking the Equipment1.
Before beginning installation, check the overall condition of the equipment. Remove packing materials, and examine all
components for signs of shipping damage. Any shipping damage is the customer's responsibility and should be reported
immediately to your freight carrier.
1.2 Inlet Dimensions
Each PIxxxx Inlet includes:
1 - Hardware Package (HP1222)
" 8
48
12
71⁄2" H. x 47" W.
111⁄2” H. x 47” W
141⁄2” H. x 47” W
WALL OPENING
(I.D., framed)
!
"
HP1222 for PB Inlets
ID Qty. Cat. No. Description
[A] 1 FA1199-2 Lift Bracket
[B] 2 KS1066 1⁄4”x21⁄4” Hex Bolt, SS
[C] 2 KN0702 1⁄4" Flange Nut, SS
[D] 2 KW3002 1⁄4” Flat Washer, SS
Optional Latch Kits (AC1558)
[E] 1 KS2465 1⁄4” x 3.5” Lag Screw, SS
[F] 1 KS2125 #10 x 3.5” Deck Screw, Ceramic CTD
[G] 1 FH2732 Latch Arm
[H] 1 KX1256 3⁄4” O.D. x 1”L. Spacer
[J] 2 KX1257 3⁄4” O.D. x 3⁄4”L. Spacers
Optional Lift Kits (FA1500)
[K] 1 AC0211/AC0212 Azuma Bolt and Nut
[L] 1 KS2601 6 GA. x 1.875” Open Eye Lag Screw, ZP
[M] 1 AC1054 Nylon Guide Link
[N] 1 AC1039 3⁄16” Dia. Cable Clamp, ZP
