MSI MS-6309 Manual de usuario

CHAPTER 1 INTRODUCTION

1-1

Chapter 1

INTRODUCTION

The 694 Master (MS-6309 ver 3.0) ATX mainboard is a high-performance

computer mainboard based on VIA®VT82C694X chipset. The 694 Master

(MS-6309 ver 3.0) is designed for the Intel®CeleronTM or Coppermine (FC-

PGA) processor for inexpensive business/personal desktop markets.

TheApolloPro133A(VT82C694X)isaSocket-370systemlogicnorthbridge

with the addition of 133 MHz capability for both the CPU and SDRAM

interfaces. Apollo Pro133A may be used to implement both desktop and

notebook personal computer systems from 66MHz to 133MHz based on

Socket-370. The primary features of the Apollo Pro133A-North Bridge are:

Slot-1orSocket-370CPU(FrontSideBus)Interface(66 / 100 / 133MHz),

DRAMMemory Interface (66 / 100/133MHz), AGP Bus Interface(66MHz),

PCIBusInterface(33MHz), Mobile Power Management.

TheVT82C686B PSIPC (PCI Super-I/OIntegratedPeripheral Controller) is a

high integration, high performance, power-efficient, and high compatibility

device that supports Intel and non-Intel based processor to PCI bus bridge

functionality to make a complete Microsoft PC99-compliant PCI/ISA system.

CHAPTER 1 INTRODUCTION

1-2

Mainboard Features

CPU

lSocket 370 for Intel®CeleronTM/ Coppermine processor.

lSupports233MHz,266MHz, 300MHz,333MHz,350MHz, 400MHz,

450MHz,500MHZ,533MHzto1GHz.

Chipset

lVIA®694Xchipset (510BGA)

-AGP 4x and PCI plus Advanced ECC Memory Controller

-SupportPC100/133 SDRAM, VCM technology

lVIA®VT82C686Bchipset(352BGA)

- Advanced Power Management Features

-IntegratedSuperI/O(FDC,LPT,COM 1/2, and IR)

- DirectSound AC97 Audio

-DualbusMasterIDEUltraDMA33/66/100

-ACPI

ClockGenerator

l66.6MHz,100MHz and133MHzclocks are supported.

MainMemory

lSupport eight memory banks using four 168-pin unbuffered DIMM.

lSupporta maximummemory sizeof 2GB (32Mx8).

lSupportECC(1-bitErrorCodeCorrect)function.

lSupport 3.3v SDRAM DIMM.

Slots

lOne AGP (Accelerated Graphics Port) slot.

- AGP specification compliant

- AGP66MHz 3.3v/1.5v for 2x/4x device support

lOne CNR (Communication Network Riser) slot which support Modem

only.

lSix 32-bit Master PCI Bus slots.

lSupports 3.3v/5v PCI bus Interface.

CHAPTER 1 INTRODUCTION

1-3

On-BoardIDE

lAnIDEcontrolleron the VIA®VT82C686BChipsetprovidesIDE HDD/

CD-ROM with PIO, Bus Master and Ultra DMA 33/66/100 operation

modes.

lCan connect up to four IDE devices.

On-BoardPeripherals

lOn-BoardPeripherals include:

-1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes.

-2 serial ports (COMA + COMB)

- 1 parallel port supports SPP/EPP/ECP mode

- 4 USB ports

- 1 IrDA/HP connector for SIR

-1394 (optional)

Audio

lChip Integrated (Software Audio)

-AC’97Compliant

BIOS

lThe mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

lThe mainboard provides a Desktop Management Interface (DMI)

function which records your mainboard specifications.

Dimension

lATXFormFactor : 30.5cm (L)x21cm (W) x4 layers PCB

Mounting

l6 mounting holes.

CHAPTER 1 INTRODUCTION

1-4

PCI SLOT 3

PCI SLOT 2

PCI SLOT 1

ATX

Power Supply

VIA

694X

chipset

Socket 370

DIMM 2

Top: mouse

Bottom:

keyboard

Top:Port 1

USB

DIMM 3

IDE1

Bottom:

Port2

IDE2 FDD

VT82C686B

JMDM1

JFP1

JGS1

JGL1

JBAT1

JWOL1

JPH

JAUX

CPUFAN

BATT

Top: LPT

Bottom:

COMA

COMB

Top: Midi/

GamePort

Bottom:

Line-Out

Line-In

Mic

694 Master (MS-6309 ver 3.0) Mainboard

JCD

USB2

JRMS1

CNR1

AGP Slot

SYSFAN

JVTT

DIMM 1

PCI SLOT 4

PCI SLOT 5

BIOS

Mainboard Layout

VT1611A

DIMM 4

PCI SLOT 6

JFSH1

DiagnosticLED

JSPK1

J601

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-1

+27

Chapter 2

HARDWARE INSTALLATION

Central Processing Unit: CPU

The mainboard operates with Intel® CeleronTM/Pentium® III (FC-PGA)

processor. The mainboard uses a CPU socket called Socket 370 for easy

CPU installation. The CPU should always have a eat Sink and a cooling

fan attached to prevent overheating.

3. Press the lever down to

complete the installation.

2. Locate Pin 1 in the socket

and look for the white dot or

cut edge in the CPU. Match

Pin 1 with the white dot/cut

edge. Then, insert the CPU.

It should insert easily.

Open Lever

Pin 1

Sliding

Plate

White dot/

Cut edge

Lever

1. Pull the lever sideways away

from the socket. Then, raise

the lever up to a 90-degree

angle.

Pin 1

••

• CPU Installation Procedures

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-2

The BIOS can be used to set the CPU ost Bus Frequency Clock.

If CPU Clock = 66M z

Core/Bus ratio = 3.5

then CPU core speed = ost Clock x Core/Bus ratio

= 66M z x 3.5

= 233M z

• CPU Core Speed Derivation Procedure

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-3

• Fan Power Connectors: CPUFAN & SYSFAN

These connectors support system cooling fan with + 12V. It sup-

ports three pin head connector. When connecting the wire to the

connector, always take note that the red wire is the positive and

should be connected to the +12V, the black wire is Ground and

should be connected to GND. If your mainboard has System ard-

ware Monitor chipset on-board, you must use a specially designed

fan with speed sensor to take advantage of this function.

For fans with fan speed sensor, every rotation of the fan will send out 2

pulses. System ardware Monitor will count and report the fan rotation

speed.

Note: Always consult your reseller for proper CPU cooling fan.

CPUFAN

CPUFAN: Processor Fan

SYSFAN: System Fan

+12V

GND

SENSOR

SYSFAN

+12V

GND

SENSOR

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

Clear CMOS Jumper: JBAClear CMOS Jumper: JBA

Clear CMOS Jumper: JBAT1T1

T1T1

A battery must be used to retain the mainboard configuration in CMOS

RAM. Short 1-2 pins of JBAT1 to store the CMOS data.

Keep Data Clear Data

Note: You can clear CMOS by shorting 2-3 pin, while the system is off.

Then, return to 1-2 pin position. Avoid clearing the CMOS while

the system is on, it will damage the mainboard. Always unplug

the power cord from the wall socket.

JBAT1

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-5

Memory InstallationMemory Installation

Memory Installation

••

• Memory ank Configuration

The mainboard supports a maximum memory size of 2GB (256-bit

technology) SDRAM: It provides four 168-pin unbuffered DIMMs (Double

In-Line Memory Module) sockets. It supports 8 MB to 512 Mbytes DIMM

memory module.

DIMM1(Bank0+ Bank1)

DIMM2(Bank2+ Bank3)

DIMM3(Bank4+ Bank5)

DIMM4(Bank6+ Bank7)

There are three kinds of DIMM specification supported

by this mainboard: PC133, PC100 and PC66 If you

use 66MHz CPU Bus Frequency, these four DIMM

Specs is supported If you use 100 MHz CPU Bus

Frequency, only PC100 DIMM Specs is supported If

you use 133 MHz CPU Bus Frequency, only PC133

DIMM Specs is supported



WARNING!

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-6

A. How to install a DIMM Module

1. The DIMM slot has 2 Notch Keys VOLT and DRAM, so the

DIMM memory module can only fit in one direction.

2. Insert the DIMM memory module vertically into the DIMM slot.

Then push it in.

3. The plastic clip at the side of the DIMM slot will automatically

close.

Single Sided DIMM

Double Sided DIMM

VOLTDRA

••

• Memory Installation Procedures

Otros manuales para MS-6309

Tabla de contenidos

Otros manuales de Placa madre de MSI

MSI

MSI K8NGM-V Series Manual de usuario

MSI

MSI MS-7304 Manual de usuario

MSI

MSI X99A WORKSTATION Manual de usuario

MSI

MSI B550M PRO-VDH WIFI Manual de usuario

MSI

MSI D3050 Manual de usuario

MSI

MSI 945G Neo Manual de usuario

MSI

MSI H55M-E33 series Manual de usuario

MSI

MSI H61I-E35 V2/W8 Series Manual de usuario

MSI

MSI MS-7238 Manual de usuario

MSI

MSI MPG X570S EDGE MAX WIFI Manual de usuario

MSI

MSI MS-7199 Manual de usuario

MSI

MSI 7D96-003R Manual de usuario

MSI

MSI K7N2GM2-ILSR Manual de usuario

MSI

MSI B75A-G43 series Manual de usuario

MSI

MSI H170A PC MATE Manual de usuario

MSI

MSI Z170A-G43 PLUS Manual de instrucciones

MSI

MSI Creator X299 Manual de usuario

MSI

MSI H67A-G43 (B3) Manual de usuario

MSI

MSI MAG Z590 TORPEDO Manual de usuario

MSI

MSI MPG Z390I GAMING EDGE AC Manual de usuario

MSI

MSI MPG B550 GAMING CARBON WIFI Manual de usuario

MSI

MSI MS-6391 Manual de usuario

MSI

MSI MS-6558/G Manual de usuario

MSI

MSI X99A GAMING 7 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario