MSI MS-5191 Manual de usuario
CHAPTER 1 INTRODUCTION
1-1
Chapter 1
INTRODUCTION
The MICRO ATX AL14 mainboard is a high-performance personal computer
mainboard. This mainboard supports Intel® Pentium® processor/Pentium®
processor with MMXTM technology, AMD®K6/K6-2/K6-III, and Cyrix®
6x86L/6x86MX/MII processors. This mainboard combines leading edge
AGPATI®3D 128VRtechnologyingraphicsandCreative®ES1373PCI
Enhanced technology in audio. The mainboard also supports three 32-bit
PCI (Peripheral Component Interconnect) Local Bus standard slots.
The mainboard uses the highly integrated Aladdin® 5 chipset to support the
PCI/ISA and Green standards, and to provide the Host/AGP bridge. The
Aladdin® 5 chipset integrates all system control functions such as ACPI
(Advanced Configuration and Power Interface). The ACPI provides more
Energy Saving Features for the OSPM(OS Direct Power Management)
function. The Aladdin® 5 chipset also improves the IDE transfer rate by
supporting Ultra DMA/33 IDE that transfer data at the rate of 33MB/s.
CHAPTER 1 INTRODUCTION
1-2
1.1 Mainboard Features
CPU
lSocket 7 supports Intel®Pentium®processor with MMXTM technology.
lCyrix®6x86L/6x86MX/MIIaresupported.
lAMD®K6/K6-2/K6-III processors are supported.
Chipset
lAladdin® 5M1541/M1543Cchipset.
FSB (Front Side Bus)
l100/95/83.3/75/66MHzclocksare supported.
Cache Memory
lSupports 512K or 1MB Pipelined Burst cache memory.
Switching Regulator
lProvidesCPUwithvoltageranging from 1.3V to 3.5V
lSupport VI/O 3.45 for AMD K6 300 processor
Main Memory
lSupports four memory banks using two 168-pin unbuffered DIMM.
lSupportsa maximum memorysizeof 256MB.
Slots
lThree 32-bit Master PCI Bus slots and one 16-bit ISA bus slots(wherein
one PCI/ISA is shared).
lSupports 3.3v/5v PCI bus Interface.
On-Board IDE
lAn IDE controller on the Aladdin®M1543C PCI Chipset provides IDE
HDD/CD-ROMwithPIO,DMAandUltraDMA/33operationmodes.
lConnect up to four IDE devices.
CHAPTER 1 INTRODUCTION
1-3
Video
lATI®3D 128 VR
-RunningonAGPBUS.
-Onboard16MB SGRAM.
- 3D Acceleration.
Audio
lCreative®ES1373
-RunningonPCIBUS.
-64Voiceand AC3 Capable
- Support Direct Sound and Direct Sound 3D
-AC97’ Compliant
On-Board Peripherals
lOn-BoardPeripheralsinclude:
- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
- 1 serial ports (COMA)
- 1 parallel port supports SPP/EPP/ECP mode
- 2 USB ports
-1IrDAconnectorforSIR/FIR.
-1VGA port
BIOS
lThe mainboard BIOS provides “Plug & Play” BIOS which detects the
peripheral devices and expansion cards of the board automatically.
lThe mainboard provides a Desktop Management Interface(DMI) function
which records your mainboard specifications.
Dimension
lMicro-ATXform factor : 24.4cm(L)x 24.5cm(W)x4 layersPCB
Mounting
l7 mounting holes.
CHAPTER 1 INTRODUCTION
1-4
Remote Control
lMeet ACPI specifications.
lPower ON/OFF switch connector on-board.
lSoftPower-Off.
lSupport modem ring wake-up .
lSupportalarmwake-up.
lSupport LAN wake-up.
CHAPTER 1 INTRODUCTION
1-5
1.2 Mainboard Layout
MS-5191 MICRO ATX AL14 Mainboard
Socket 7
DIMM
DIMM 2 FDD1
IDE 1
PCISlot
BIOS
IDE 2
PCISlot
PCISlot
ATX
PowerSupply
Aladdin® 5
chipset
T:Mouse
B:
Keyboard
T:PrinterPort
B:SerialPort/
VGAPort
USB
Ports
Batt
DIMM 1
SW
CPUFAN
Socket 7
ATI® 3D
RAGE
128VR
Creative
ES1373
JTAD1
JAUX1
CHSFAN
JFP1
Aladdin®
M1543C
chipset
SGRAM
Top: Midi/
GamePort
Bottom:
Line-In
Line-Out
Mic
SGRAM
SGRAM
SGRAM
JCD1
JV1 1
5
JSCL1
JBAT1
ISA Slot
CHAPTER 2 HARDWARE INSTALLATION
2-1
CPU
CPU
Chapter 2
HARDWARE INSTALLATION
2.1 Central Processing Unit: CPU
TheMICROATXAL14mainboard operateswithIntel®Pentium® processor
withMMXTM technology,AMD®K6/K6-2/K6-III,andCyrix®6x86L/
6x86MX/MIIprocessors. It could operate with 2.0V to 1.3V processors.
The mainboard provides a 321-pin ZIF Socket 7 for easy CPU installation, a
DIP switch (SW1) to set the proper speed for the CPU and (JV1) for setting
the CPU voltage. It is recommended that the processor should have a
cooling fan attached to prevent from overheating.
3. Press the lever down to
complete the installation.
2. Locate Pin 1 in the socket
and look for the white dot or
cut edge in the CPU. Match
Pin 1 with the white dot/cut
edge. Then, insert the CPU.
It should insert easily.
OpenLever
Pin1
Sliding
Plate
White dot/
Cut edge
Close
Lever
1. Pull the lever sideways away
from the socket. Then, raise
the lever up to a 90-degree
angle.
2.1-1 CPU Installation Procedure
CHAPTER 2 HARDWARE INSTALLATION
2-2
2.1-2 CPU Core Speed Derivation Procedure
4 5 6 Clock
OFF OFF OFF 100MHz
ON OFF OFF 95MHz
OFF ON OFF 83MHz
OFF OFF ON 75MHz
OFF ON ON 66MHz
ON ON ON 60MHz
ON OFF ON 68MHz
SW1 CPU
1. The DIP Switch SW1 (4, 5, & 6) is used to adjust the CPU clock frequency.
2. The DIP Switch SW1 (1, 2, and 3) is used to set the Core/Bus (Fraction)
ratio of the CPU. The actual core speed of the CPU is the Host Clock
Frequency multiplied by the Core/Bus ratio. For example:
If CPUClock = 66MHz
Core/Busratio = 3/2
then CPUcore speed = Host Clock x Core/Bus ratio
= 66MHz x 3/2
= 100MHz
SW1 CPU
1 2 3 Core/Bus Ratio
OFF OFF ON 5.5x
OFF ON ON 5x
ON ON ON 4.5x
ON OFF ON 4x
OFF OFF OFF 3.5x
OFF ON OFF 3x
ON ON OFF 2.5x
ON OFF OFF 2x
CHAPTER 2 HARDWARE INSTALLATION
2-3
2.1-3 CPU Voltage Setting: JV1
JV1
1
2
3
4
5
Vcore
V I/O
3.4 3.4
3.4 3.3
3.4 3.2
3.4 2.9
JV1 VcoreV I/O
3.4 2.8
3.4 2.3
3.4 2.2
JV1
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
CHAPTER 2 HARDWARE INSTALLATION
2-4
1 2 3 4 5 VI/O VCore
OFF OFF OFF OFF ON 3.45 1.3
ON OFF OFF OFF ON 3.45 1.35
OFF ON OFF OFF ON 3.45 1.4
ON ON OFF OFF ON 3.45 1.45
OFF OFF ON OFF ON 3.45 1.5
ON OFF ON OFF ON 3.45 1.55
OFF ON ON OFF ON 3.45 1.6
ON ON ON OFF ON 3.45 1.65
OFF OFF OFF ON ON 3.45 1.7
ON OFF OFF ON ON 3.45 1.75
OFF ON OFF ON ON 3.45 1.8
ON ON OFF ON ON 3.45 1.85
OFF OFF ON ON ON 3.45 1.9
ON OFF ON ON ON 3.45 1.95
ON ON ON ON ON 3.45 2.0
ON OFF OFF OFF OFF 3.45 2.1
OFF ON OFF OFF OFF 3.45 2.2
ON ON OFF OFF OFF 3.45 2.3
OFF OFF ON OFF OFF 3.45 2.4
ON OFF ON OFF OFF 3.45 2.5
OFF ON ON OFF OFF 3.45 2.6
ON ON ON OFF OFF 3.45 2.7
OFF OFF OFF ON OFF 3.45 2.8
ON OFF OFF ON OFF 3.45 2.9
OFF ON OFF ON OFF 3.45 3.0
ON ON OFF ON OFF 3.45 3.1
OFF OFF ON ON OFF 3.45 3.2
ON OFF ON ON OFF 3.45 3.3
OFF ON ON ON OFF 3.45 3.4
ON ON ON ON OFF 3.45 3.5
Other CPU Voltage Setting
CHAPTER 2 HARDWARE INSTALLATION
2-5
To set the proper speed and voltage of the CPU, you must know the specifi-
cations of your CPU (always ask the vendor for CPU specifications).
Then refer to Table 2.1 (Intel®Processor), Table 2.2 (Cyrix®
Processor), and Table 2.3 (AMD®Processor) for proper setting.
2.1-4 CPU Speed and Voltage Setting: SW1 and JV1
SW1
JV1
1
2
3
4
5
ON
OFF
1234
ON
65
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Placa madre de MSI
MSI
MSI MS-5148 Manual de usuario
MSI
MSI MS-6137 v5.X Manual de usuario
MSI
MSI MAG Z690 TOMAHAWK Manual de usuario
MSI
MSI Z790 GAMING PRO WIFI Manual de usuario
MSI
MSI H8M-P32 Manual de usuario
MSI
MSI MAG B660 TOMAHAWK WIFI DDR4 Manual de usuario
MSI
MSI MPG GAMING PLUS Z390 Manual de usuario
MSI
MSI Z77A-G45 GAMING series Manual de usuario
MSI
MSI Wind Board 330 Manual de usuario
MSI
MSI H67A-G43 B3 series Manual de usuario
MSI
MSI MS-6137 Manual de usuario
MSI
MSI K9AGM Series Manual de usuario
MSI
MSI MS-6182 Manual de usuario
MSI
MSI 661FM Series Manual de usuario
MSI
MSI 760GA-P43 FX Manual de usuario
MSI
MSI MEG Z590 UNIFY-X Manual de usuario
MSI
MSI RS480M Manual de usuario
MSI
MSI K7T266 Pro-R Manual de usuario
MSI
MSI 915G Neo2-FR Manual de usuario
MSI
MSI MS-6309 Manual
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
