MSI D3050 Manual de usuario
D3050
MS-S3261
Server Motherboard
User Guide
2Contents
Revision
V1.1, 2023/08
Contents
Regulatory Notices....................................................................................................... 4
Safety Information ......................................................................................................... 6
Specifications................................................................................................................ 7
Overview of Components ............................................................................................. 9
Rear I/O Panel............................................................................................................. 10
UID LED Button..................................................................................................... 10
COM Port............................................................................................................... 10
VGA Port................................................................................................................ 10
Connector ...................................................................................... 10
USB 3.2 Gen 1 Port (USB 3.2 Gen 1/ USB 2.0)...................................................... 10
GbE RJ45 Port (for mgmt.) ................................................................................... 11
GbE RJ45 Port....................................................................................................... 11
CPU Socket ................................................................................................................. 13
Introduction to the AM5 CPU......................................................................... 13
CPU & Heatsink Installation................................................................................. 14
Memory ....................................................................................................................... 15
DIMMA1~2, DIMMB1~2: DDR5 DIMM Slots................................................... 15
Recommended Memory Population.............................................................. 15
Installing Memory Modules.................................................................................. 16
Storage........................................................................................................................ 17
SATA5_6, SATA1~4: SATA 3.0 6Gb/s Ports................................................... 17
M2_1~2: M.2 Slots (M Key, PCIe 4.0, 22110/ 2280) ....................................... 18
Installing M.2 SSD ......................................................................................... 18
Expansion Slots .......................................................................................................... 19
PCIE_1~2: PCIe Expansion Slots .................................................................. 19
3
Contents
Connectors.................................................................................................................. 20
Power Connectors ................................................................................................ 20
JATX12V1: 12PIN ATX Power Connector....................................................... 20
ATX4PIN1: 4PIN ATX Power Connector........................................................ 20
SATAPWR1: SATA Power Connector............................................................ 21
JSDOMPWR1: SATA DOM Power Connector................................................. 21
Cooling Connectors .............................................................................................. 22
FAN1~8, PUMP1: Fan Power Connectors..................................................... 22
Other Connectors ................................................................................................. 23
JFP1: Front Panel Connector........................................................................ 23
JTPM1: SPI TPM Module Box Header ........................................................... 24
JGPIO1: GPIO Header .................................................................................... 25
JPMBUS1: PMBUS Box Header .................................................................... 25
JCHASSIS: Chassis Intrusion Header ........................................................... 26
JIPMB1: IPMB Box Header........................................................................... 26
JUSB1: USB 3.2 Port Box Header ................................................................. 27
JUSB2: USB 3.2 Gen 1 Type-A Connector (USB 3.2 Gen 1/ USB 2.0) ........... 27
FP_I2C_1, RBP_I2C_1~2: I2C Box Headers ................................................. 28
JCOM1: COM Port Box Header...................................................................... 28
Jumpers ...................................................................................................................... 29
Onboard LEDs............................................................................................................. 30
BMC_LED1: BMC Heartbeat LED.................................................................. 30
LED_H1, LED_L1: Port 80 Debug LEDs ........................................................ 30
4Regulatory Notices
Regulatory Notices
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2012/19/EU, products of “electrical and
electronic equipment” cannot be discarded as municipal waste anymore
and manufacturers of covered electronic equipment will be obligated to
take back such products at the end of their useful life.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
https://csr.msi.com/global/index
CE Conformity
Hereby, Micro-Star International CO., LTD declares that this device is in
compliance with the essential safety requirements and other relevant
provisions set out in the European Directive.
FCC-A Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
∙This device may not cause harmful interference, and
∙This device must accept any interference received, including interference that may
cause undesired operation.
5
Regulatory Notices
Battery Information
Please take special precautions if this product comes with a battery.
∙Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer.
∙Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, which can result in an explosion.
∙Avoid leaving a battery in an extremely high temperature or extremely low air
pressure environment that can result in an explosion or the leakage of flammable
liquid or gas.
∙Do not ingest battery. If the coin/button cell battery is swallowed, it can cause
severe internal burns and can lead to death. Keep new and used batteries away
from children.
European Union:
Batteries, battery packs, and accumulators should not be disposed of as
unsorted household waste. Please use the public collection system to
return, recycle, or treat them in compliance with the local regulations.
BSMI:
廢電池請回收
For better environmental protection, waste batteries should be collected
separately for recycling or special disposal.
California, USA:
The button cell battery may contain perchlorate material and requires
special handling when recycled or disposed of in California.
For further information please visit:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is
a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names
mentioned may be trademarks of their respective owners. No warranty as to accuracy
or completeness is expressed or implied. MSI reserves the right to make changes to
this document without prior notice.
The terms HDMI™, HDMI™ High-Definition Multimedia Interface, HDMI™ Trade dress
and the HDMI™ Logos are trademarks or registered trademarks of HDMI™ Licensing
Administrator, Inc.
Technical Support
If a problem arises with your product and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor. Alternatively,
please visit https://eps.msi.com/support for further guidance.
6Safety Information
Safety Information
∙Always read the safety instructions carefully.
∙Keep this User’s Manual for future reference.
∙Keep this equipment away from humidity.
∙Lay this equipment on a reliable flat surface before setting it up.
∙The openings on the enclosure are for air convection hence protects the equipment
from overheating. Do not cover the openings.
∙Make sure the voltage of the power source and adjust properly before connecting
the equipment to the power inlet.
∙Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
∙Always unplug the power cord before inserting any add-on card or module.
∙All cautions and warnings on the equipment should be noted.
∙Never pour any liquid into the opening that could damage or cause electrical shock.
∙If any of the following situations arises, get the equipment checked by service
personnel:
∙The power cord or plug is damaged.
∙Liquid has penetrated into the equipment.
∙The equipment has been exposed to moisture.
∙The equipment does not work well or you can not get it work according to User’s
Manual.
∙The equipment has dropped and damaged.
∙The equipment has obvious sign of breakage.
∙Do not leave this equipment in an environment unconditioned, storage
temperature above 60°C (140°F), it may damage the equipment.
7
Specifications
Specifications
Model MS-S3261
Form factor Micro-ATX
Dimensions 243.84mm (9.6”) x 243.84mm (9.6”)
Processor ∙1 x AMD® Ryzen™ 7000 Series Processor, TDP up to 170W
-Processor socket AM5
Chipset AMD B-Class Chipset
Memory ∙4 x DDR5 memory slots, supporting up to 128GB
-Supports UDIMM 5200MT/s (2DPC), ECC/ non-ECC
Networking ∙4 x GbE RJ45 ports
-Intel® Ethernet controller I210-AT
-JLANCONN1 (L) support shared NIC
Server
Management
∙Aspeed AST2600 IPMI 2.0 with iKVM support
∙1 x GbE RJ45 port for Mgmt. (Realtek® RTL8211FD-CG HF)
Storage ∙6 x SATA 3.0 ports (w/ 1 x VCC)
∙2 x M.2 M-Key (PCIe 4.0, 22110/ 2280)
-Option 1: PCIe 4.0 x4x0
-Option 2: PCIe 4.0 x2x2
Internal I/O ∙1 x Front panel connector
∙1 x Chassis intrusion header
∙1 x USB 3.2 Gen 1 Type-A connector (USB 3.2 Gen 1/ USB 2.0)
∙1 x USB 3.2 port box connector
∙2 x SPI TPM module box headers
∙1 x GPIO connector
∙3 x I2C box headers
∙1 x IPMB box header
∙1x PMbus box header
∙1 x COM port box header
8Specifications
Model MS-S3261
Rear I/O ∙4 x USB 3.2 Gen 1 Type-A ports (USB 3.2 Gen 1/ USB 2.0)
∙4 x 1GbE RJ45 ports
∙1 x GbE RJ45 ports (Mgmt.)
∙1 x COM port
∙1 x HDMI™ Connector
∙1 x VGA port
∙1 x UID LED button
Expansion Slot ∙1 x PCIe 5.0 x 16 slot (Gen 5 x 16 signal from CPU) (Slot 7)
∙1 x PCIe 4.0 x 8 slot (Gen 4 x 4 signal from CPU) (Slot 6)
Security 1 x TPM header
Cooling 9 x 4-pin fan headers (1 x for liquid cooling only, PUMP1)
Power Supply ∙1 x 12-pin ATX power connector
∙1x 4-pin ATX power connector
∙1 x 4-pin SATA power connector
∙1 x 2-pin SATA DOM power connector
Environmental ∙Operating Temperature: 0°C to 45°C
∙Operating Humidity: 0% to 85% (non-condensing)
Certifications CE, FCC (Class A)
9
Overview of Components
Overview of Components
JCHASSIS
JIPMB1
JSEL_M2
JSEL_BMC1 JRTC_CLR1
JBMC_DBG1
M2_2
PCIE_1
PCIE_2
JCOM1
BZ1
M2_1
BAT1
JGPIO1
JFP1
JBTN1
JRST1
JUSB1
JUSB2
RBP_I2C_2
RBP_I2C_1
SATA1
SATA5_6
SATA4
JTPM1
FAN1 FAN2 FAN3 FAN4 FAN5 FAN6 FAN7
SATAPWR1
ATX4PIN1
JATX12V1
DIMMA1
DIMMA2
DIMMB1
DIMMB2
SATA3
JSDOMPWR1
SATA2
FP_I2C_1
FAN8 PUMP1 JPMBUS1
ID_BTN1
JVGA1 (L)
COM1 (U)
JHDMI1
JLANCONN2
JLANCONN1
MLAN_USB1
REAR_USB1
LED_L1
LED_H1 BMC_LED1
10 Rear I/O Panel
Rear I/O Panel
UID LED
Button
GbE RJ45 Port
(for mgmt.)
VGA Port
COM Port
GbE RJ45 Port
USB 3.2 Gen 1 Port
(USB 3.2 Gen 1/ 2.0)
UID LED Button
The UID (Unit Identification) button help users identify and locate a system, especially
in high-density rack environments.
COM Port
A COM port, also called a serial port or DB9 connector, is a communication interface
for transferring data between a computer and external devices such as barcode
scanners, printers, and credit card machines. It’s commonly used for initial system
configuration and diagnostics on server boards and for connecting legacy devices
that lack modern interfaces. Users can connect a specially configured serial cable to
establish a serial connection.
VGA Port
The DB15-pin female connector is provided for monitors.
Connector
The High-Definition Multimedia Interface (HDMI™) is an all-digital audio/ video
interface capable of transmitting uncompressed streams. HDMI™ supports all TV
format, including standard, enhanced, or high-definition video, plus multi-channel
digital audio on a single cable.
USB 3.2 Gen 1 Port (USB 3.2 Gen 1/ USB 2.0)
The USB (Universal Serial Bus) port is for attaching USB devices such as keyboards,
mouse, or other USB-compatible devices. USB 3.2 Gen 1 supports data transfer
rates up to 5 Gbit/s (SuperSpeed), while USB 2.0 supports data transfer rates up to
480Mbit/s (Hi-Speed).
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Placa madre de MSI
MSI
MSI MAG B660M BAZOOKA Manual de usuario
MSI
MSI K9N SLI V2 Series Manual de usuario
MSI
MSI B350M MORTAR Manual de usuario
MSI
MSI MPG Z390M GAMING EDGE AC Manual de usuario
MSI
MSI PRO Z690-A WIFI DDR4 Manual de usuario
MSI
MSI K9N6PGM2-V - Motherboard - Micro ATX Manual de usuario
MSI
MSI Z370I GAMING PRO CARBON AC Manual de usuario
MSI
MSI MEG X570 GODLIKE Manual de usuario
MSI
MSI A55M-P25 Series Manual de usuario
MSI
MSI Z68A-GD65 series Manual de usuario
MSI
MSI A320M PRO-VD Manual de usuario
MSI
MSI 955X Platinum Manual de usuario
MSI
MSI Z97U GAMING 9 ACK Manual de usuario
MSI
MSI Z68A-GD65 B3 series Manual de usuario
MSI
MSI MS-98H5 Manual de usuario
MSI
MSI B360M BAZOOKA Manual de usuario
MSI
MSI B450-A PRO Manual de usuario
MSI
MSI A88XI AC Manual de usuario
MSI
MSI B85M GAMING Manual de usuario
MSI
MSI K8N Neo2-F Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
