MSI MS-1035 Manual de usuario
Index
Overview
Step 1: Installing CPU
Step 2: Installing CPU Heat Sink and Fan
Step 3: Installing Notebook Memory
Step 4: Installing Mini PCI WLAN Card
Step 5: Installing Notebook Hard Drive (HDD)
Step 6: Installing the Battery
Step 7: Final Check
Step 8: Entering BIOS
p. 1
p. 3
p. 3
p. 5
p. 6
p. 7
p. 9
p. 10
p. 11
Installation Guide
Copyright®2006 MSI Computer Corp.
Overview
MS-1035 is shipped out as a bare bone. Some of the components are
equipped while some are not. This installation guide provides you with the
information of notebook hardware setup. Before assembling your Notebook,
please prepare for the installation tools and appropriate items. If you are not
clear about the items, please contact your dealer for more information.
Package check list
Optional Hardware Devices:
HDD, Mini PCI WLAN card, CPU, Memory
Before you install your Notebook
•
•
•
Warning!
•
•
•
•
The peripheral devices contained herein depend on your actual system
configuration.
Third-party trademarks and names are the properties of their respective
owners.
The information contained herein relevant to software and hardware are for
reference only and in accordance with actual system configuration. All
information are subject to change without notice.
Ensure power is turned off and Notebook Battery is removed before you
install any hardware devices.
Use a grounded wrist strap before handling computer components such as
CPU, Memory, HDD, mini-PCI Card, etc.
Place components (CPU, Memory, HDD, mini-PCI Card, etc) on a grounded
antistatic pad or on the bed that came with the components whenever the
components are separated from the Notebook.
If there are any difficulties installing hardware devices, please contact your
dealer for further information.
Open View
1. Cover latch
2. Display Panel
3. Quick Launch Buttons and Power button
4. Status LEDs
5. Keyboard
6. Touchpad
7. Stereo Speakers
Front View Rear View
Right View Left View
Bottom View
1. CPU Compartment
2. Mini PCI Drive Compartment
3. Memory Compartment
4. Hard Disk Drive Compartment
5. Battery Unlock Button
6. Battery Pack
p. 1 p. 2
2-2 Slide the CPU Heat Sink and Fan assembly over the CPU !! Be sure that there are
no wires underneath the Heat Sink !!
2-3 a.b.c.d. Align the four screws with the screw holes next to the CPU. May need to
slide the Heat Sink to the side to align. Tighten the four screws in a diagonal
direction. !! Improper connection of the CPU heat sink will damage the notebook
and CPU !!
2-4 Plug the CPU fan connector before positioning the fan. !! Connect the wires
correctly. There is only one way to connect. DO NOT force in !! Warning: failure to
connect the fan may cause damage to the notebook and CPU !!
Step 1 : Installing CPU
1-1 Prepare a proper size flat head screw driver. Un-screw the screw until it can not
go any further
1-2 Locate the golden cut edge on the CPU’s upper right-hand corner. Then insert the
CPU into the socket. !! The CPU will only fit in the coorect orientation !!
1-3 Adjust the CPU socket by turning the screw. Make sure the CPU is properly
installed. Then press the CPU evenly by hand and turn the screw using a flat head
screw driver to lock the CPU in place. !! Please make sure the golden cut edge
location is aligned with the notch of the CPU socket. If the CPU does not align with
the CPU socket, it will damage the CPU !!
Step 2 : Installing CPU Heat Sink and Fan
2-1 Use the Heat Sink and Fan that is provided
p. 3 p. 4
a. b.
c. d.
Step 4 : Installing Mini PCI WLAN Card
4-1 Align the Mini PCI Card to the Mini PCI socket.
4-2 Adjust the attached antennas and push down the Mini PCI Card gently until the
metal-locking levers aside from the Mini PCI socket is fastened. !! Mini PCI Card
can only fit in one direction due to the keyed notch. Wrong orientation will cause
improper installation and may damage the Mini PCI card or Mini PCI socket !!
4-3 Connect the Black wire to the Main Connector.
4-4 After connecting the black wire, connect the Gray wire to the AUX connector.
Step 3 : Installing Notebook Memory
3-1 Align the memory module to the DIMM socket 1. !! Memory module can only fit in
one direction due to the keyed notch. Wrong orientation will cause improper
installation and may damage the memory modules or DIMM sockets !!
3-2 Push down the memory module gently until the metal-locking levers aside from
the DIMM socket 1 is fastened.
3-3 If you have more than one memory module, please align the 2nd memory module
to the DIMM socket 2. !! Memory module can only fit in one direction due to the
keyed notch. Wrong orientation will cause improper installation and may damage
the memory modules or DIMM sockets !!
3-4 Push down the memory module gently until the metal-locking levers aside from
the DIMM socket 2 is fastened.
p. 5 p. 6
4-5 a.b.c.d.e. After installing the CPU, Memory, and Mini PCI Card, gently slide the
cover until it locks into position. Lock down the cover by spplying 4 screws.
Step 5 : Installing Notebook Hard Drive (HDD)
5-1 a.b. Please use the given HDD shielding tray. !! Hard Drive may not be included !!
p. 7
a
bc
de
ab
5-2 a.b. Insert the HDD into the given HDD shielding tray. !! Make sure that the screw
holes to attachHDD to Notebook are on the opposite side of the HDD Pins !!
Improper aligment will cause damage to the HDD and the Notebook !!
5-3 a.b.c.d. After inserting the shield over the HDD, fasten the screw that are provided.
5-4 After installing the shield, slide the HDD into the HDD bay. Gently push the HDD
towards the side until HDD can go no further. !! Be sure to have HDD Plastic puller
face up !!
a. b.
c. d.
a. b.
p. 8
5-5 a.b. Push HDD down into the HDD Bay. Tighten the two screws that are provided
to secure the HDD in place. !! Failure to apply 2 screws may cause HDD assembly
to fall off in Notebook HDD area and will damage the HDD and Notebook !!
5-6 a.b.c. After installing the HDD, slide the cover then gently press down. Lock down
the cover by applying 2 screws.
p. 9 p. 10
a. b.
a.
c.
b.
Step 6 : Installing the Battery
6-1 a.b.c. Align battery to the battery slot and push down the battery gently.
Hint: If you wish to remove the battery, make sure the battery locking mechanism
is in “Unlock” position.
Step 7 : Final Check
7-1 Check all steps and make sure to fasten all the components and screws before
powering on your notebook. !! Improper installtion of any device(s) adn loosen
screws may damage teh notebook after powering on teh notebook !! Hint: If you
are unable to power on your notebook after following the above procedures, or if
there are any other issues, please contact your local retailer or national distributor
for help.
a.
c.
b.
Step 8 : Entering BIOS
Before powering on the notebook, plug in notebook power adapter into the notebook.
After pressing the power button, press <Del> immediately which will take you to the
BIOS CMOS Setup Screen.
8-1 Adjust proper TIME by pressing <Enter>. Use <+> or <-> to configure System
Time.
8-2 Under “BOOT” menu in the BIOS Setup Utility, press <Enter> to select the first
boot device. Have the first boot device as “CD/DVD.”
p. 11 p. 12
8-3 Insert a Bootable OS CD into the OSD tray.
8-4 To save/exit the BIOS Setup Screen, go under the “Exit” menu press <Enter>
under “Save Changes and Exit.” Press <Enter> under the window that pops up to
save/exit.
8-5 After seeing the Intel Logo, immediately press “Enter” in order to install OS and
follow the given setup messages.
8-6 After installing OS, insert the given Driver CD to install the appropriate drivers in
order. Hint: If you have any questions related to the BIOS Setup procedure or if
there are any other issues, please contact your local retailers or national
distributors for further support.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Computadora portátil de MSI
MSI
MSI 11UG-631IT Manual de usuario
MSI
MSI FX420 Manual de usuario
MSI
MSI C13M Manual de usuario
MSI
MSI 12VE-445IT Manual de usuario
MSI
MSI Modern 14 Manual de usuario
MSI
MSI MEGA Book L610 Manual de usuario
MSI
MSI Stealth 14 Studio A13V Manual de usuario
MSI
MSI E7405 Manual de usuario
MSI
MSI GX630 - 001US - Athlon X2 2 GHz Manual de usuario
MSI
MSI MEGA BOOK S250 Manual de usuario
MSI
MSI VR705 Manual de usuario
MSI
MSI GE600 Manual de usuario
MSI
MSI Modern 15 Manual de referencia
MSI
MSI GT76 Titan DT 9SF-077IT Manual de usuario
MSI
MSI 9SC-472FR Manual de usuario
MSI
MSI CR610 Manual de usuario
MSI
MSI Raider GE78HX 13VI-242NL Manual de usuario
MSI
MSI GE60 Manual de usuario
MSI
MSI GF63 Thin 11SC-498XIT Manual de usuario
MSI
MSI FX610 Manual de usuario
