MSE PSE-308R Manual de usuario
USER’S MANUAL
PSE-308R/316R/324R
Power Source Equipment
(AC+DC Input, Gigabit PoE Midspan)
User’s Manual
PSE-308R/316R/324R
2
Contents
1. Introduction...........................................................................
Features................................................................................................
Package Contents.................................................................................
2. Hardware Description...........................................................
Physical Dimension...............................................................................
Front Panel............................................................................................
LED Indicators.......................................................................................
Rear Panel............................................................................................
Power On..............................................................................................
Network A lication...............................................................................
RJ-45 Remote Control Port...................................................................
3. Software Utility Installation..................................................
4. GUI Management...................................................................
Dis lay and Illustration..........................................................................
System Login........................................................................................
Modify Password…...............................................................................
Edit Station TCP/IP...............................................................................
Edit Remote PoE IP.............................................................................
GUI Connect All....................................................................................
Single Station Connect/Disconnect……………………………………..
Station and Status Window Select …...................................................
Edit Port Name…………………………………………………………….
Configuration.........................................................................................
Factory Setting…………........................................................................
Board Status…………………………………………………………………
Port Status…………………………………………………………………...
GUI Version………………………………………………………………….
GUI Disconnect All…………..…………………………………………......
File O en and Save…………………………………………………………
. Technical Specification........................................................
3
3
4
4
4
4
5
5
6
6
7
14
1
15
16
17
18
20
21
23
24
25
26
27
29
30
31
32
33
3
4
User’s Manual
PSE-308R/316R/324R
3
1. Introduction
PSE-308R/316R/ 324R (Power Sourcing Equipment ), is n AC+DC input, gig bit PoE
Midsp n which injects power over d t -c rrying Ethernet c bling. The
PSE-308R/316R/324R, support 8, 16 nd 24 ports respectively in
10/100/1000B seT Ethernet network, over TIA/EIA-568 C tegory 5/5e/6 c bling. DC
oper ting power, for d t termin l units, is fed over d t p irs C (4/5) nd D (7/8) of the
c bling. Remote m n gement of up to 24 units vi TCP/IP protocol is fe tured, which
llows gre ter flexibility in the loc ting of network devices nd signific ntly decre sing
inst ll tion costs in m ny c ses.
The PSE-308R/316R/324R follows the IEEE 802.3 f st nd rd nd is completely
comp tible with existing Ethernet switches nd networked devices. This device
norm lly powers PDs (Powered Devices) th t re Power over Ethernet en bled or re
equipped to receive power over Ethernet. The PSE tests whether networked device
is PoE-c p ble nd power is never tr nsmitted unless Powered Device is t other
end of the c ble. It lso continues to monitor the ch nnel. If the Powered Device does
not dr w minimum current, bec use it h s been unplugged or physic lly turned off,
the PSE shuts down the power to th t port. Devices which re not equipped to receive
power over Ethernet m y require n extern l splitter in order to be powered. Cont ct
Mstronic for such splitter.
Features
8/16/24 port Power Sourcing Equipment (PoE midsp n)
Support 8/16/24 ports full lo d, m x. 134W/268W/403W
IEEE802.3 f compli nce
Remote power feeding of Ethernet termin ls up to 100 meters
Auto detect PD, nd support m nu l detect PD
Centr lized power distribution for PoE powered Device (PD)
Independent overlo d nd short-circuit protection per ch nnel
Supports IEEE 802.3 f non-st nd rd device
Auto refresh port st tus nd support Plug nd Pl y fe ture for PD
St nd rd 19” or 23” r ck mount ble
DIY upgr de from 8 port to 24 port v il ble
Remote m n ge up to 24 units vi TCP/IP protocol
DC input v il ble, c n work with b ttery, non-interrupt perform nce.
User’s Manual
PSE-308R/316R/324R
4
Package Contents
Unpack the contents of the PSE-308R/316R/324R
and verify the against the
checklist below.
PSE-308R/316R/324R x 1
Power Cord x 1
Br cket x 2 (for 19” r ck mounted)
CD-ROM x 1 (Softw re Utility + User M nu l)
Comp re the contents of your PSE-308R/316R/324R p ck ge with the st nd rd
checklist bove. IF ny item is missing or d m ged, ple se cont ct your loc l de ler
for service.
2. Hardware Description
This Section m inly describes the h rdw re of the PSE-308R/316R/324R nd gives
physic l nd function l overview.
Physical Dimension
PSE-308R/316R/324R physic l dimension is: 430mm x 290mm x 44mm (Lx W x H)
(1U,19” or 23” R ck mount ble)
Front Panel
Figure 2-1. The Front panel of PSE-308R/316R/324R
User’s Manual
PSE-308R/316R/324R
5
The Front P nel of the PSE-308R/316R/324R consists of 8/16/24 x RJ-45 Ethernet
ports (d t ), 8/16/24 x RJ-45 PoE ports (d t + power), 8/16/24 x LED port indic tors,
one LED power indic tor nd one RJ-45 remote control port (include one LED).
LED Indicators
The LED Indic tors gives re l-time inform tion of system tic oper tion st tus. The
following t ble provides descriptions of LED st tus nd their me ning.
LED St tus Color Description
RJ45
On Green
A network device is
detected(10/100/1000 Mbps)
but no communic tion ctivity is
detected
Blinking Green
The Ethernet port is tr nsmitting
to, or receiving p ck ge from
nother device
Off -- No device is detected
Power
On Green Power feeding norm lly
On Red Power or f n l rm
Off -- Power off
Ports
On Green Power feeding
Blinking Or nge Detecting
On Or nge The port h s been shutdown
No power feeding
On Red Al rm
No power feeding
Off -- Unknown device tt ched
No power feeding
Table 2-1. The escription of LE Indicators
User’s Manual
PSE-308R/316R/324R
6
Rear Panel
Figure 2-2. The Re r P nel of PSE-308R/316R/324R
The AC inlet, DC input termin l nd 4 Ventil tion f n re loc ted t the re r p nel of
the PSE-316R/324R, (PSE-308R only 2 f ns). The device will work with AC in the
r nge 100-240V AC, 50-60Hz. Or work with DC -56V(-42V~-57V).
Power On
Connect the power cord to the power socket on the re r p nel of the PSE. The other
side of power cord connects to the power outlet. The intern l power supply of the PSE
works with the volt ge r nge of 100V-240VAC, frequency 50~60Hz, or with volt ge
r nge of DC -42V~-57V. Check the port, the power indic tor will self-test on the front
p nel to see if power is properly supplied.
Network Application
The PSE c n provide power to the PD which follow the IEEE 802.3 f st nd rd in the
network. It c n solve the problem of position limit tion. The network device c n be
inst lled in more ppropri te position for better perform nce. The following figure is
n ex mple of network pplic tion for PSE
User’s Manual
PSE-308R/316R/324R
7
RJ-4 Remote Control Port
PSE-308R/316R/324R c n remotely m n ge the PoE vi the network. To m n ge
PSE-308R/316R/324R, you must to set the PSE-308R/316R/324R TCP/IP p r meter.
PSE-308R/316R/324R llowed you to use st nd rd Web-browser such s Microsoft
Internet Explorer or Mozil , to set the TCP/IP p r meter.
Before you use the web interf ce to set the PoE TCP/IP, verify th t
PSE-308R/316R/324R is properly inst lled on your network nd PC on the network
c n ccess PoE vi the web-browser.
1. Verify th t PC network interf ce c rd (NIC) is oper tion l on the TCP/IP protocol.
2. Supply power to PSE-308R/316R/324R.
3. Use RJ45 c ble, connect PSE308R/316R/324R direct to your PC.
4. M ke sure the PSE-308R/316R/324R def ult IP is 192.168.1.10.
5. Set your PC IP to 192.168.1.2 or other IP ddress which is loc ted in the
192.168.1.x subnet.
6. M ke sure the connector is OK (Ping 192.168.1.10 on the DOS mode).
7. St rt the web-browser nd type http://192.168.1.10 (or used PoE IP setting icon in
User’s Manual
PSE-308R/316R/324R
8
the PoE m n gement softw re).
8. The login in screen will ppe r next.
9. Key in ID (user n me) nd p ssword to enter PoE TCP/IP p r meter setting. Def ult
ID nd p ssword is dmin nd system.
10. PSE-308R/316R/324R TCP/IP p r meter h s 4 p ges interf ce ( dministr tor
setting, TCP Mode, UDP Mode nd UART). You must ch nge the dministr tor & TCP
mode to fit your network.
User’s Manual
PSE-308R/316R/324R
9
11. Administr tor setting: you c n ssign nickn me, IP setting, user n me, p ssword
nd view system inform tion.
Nickn me: You c n ssign n me to the device.
IP Address: You must ssign the IP ddress reserved by your network. The def ult IP
is 192.168.1.10.
Subnet M sk: You c n ssign the subnet m sk for the IP ddress. The def ult subnet
m sk is 255.255.255.0.
G tew y: You c n ssign the g tew y here. The def ult g tew y is 192.168.1.1.
IP Configure: You must ssign to St tic for PoE serve oper tion. The def ult IP
configure is St tic.
Usern me: You c n ssign new user n me. The def ult setting is dmin.
P ssword/Confirm: You c n type in new p ssword here. The def ult setting is system.
When you h ve finished the set up, click on Upd te to upd te your setting.
User’s Manual
PSE-308R/316R/324R
10
12. TCP Mode: You c n upd te the TCP control p r meter here.
Telnet Server/Client: Set to Server for PoE m n gement oper tion.
Port Number: You c n ssign port number for TCP/IP oper tion. The def ult Port
Number is 23.
Remote Server IP Address: Unused.
Clint mode in ctive timeout: Unused.
Server mode protect timeout: Set to 0(Dis ble) for norm l oper tion.
When you h ve finished the set up, click on Upd te to upd te your setting.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
