MRC LX-1108 Manual de usuario

Your purchase of this LIGHT METER marks a step forward for

you into the field of precision measurement. Although this LIGHT

METER is a complex and delicate instrument, its durable structure

developed. Please read the following instructions carefully and

always keep this manual within easy reach.

OPERATION MANUAL

4 light type

LIGHT METER

Model : LX-1108

Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 [email protected]

MRC.7.22

TABLE OF CONTENTS

1. FEATURES...............................................................

2. SPECIFICATIONS.....................................................

2-1 General Specifications.........................................1

2-2 Electrical Specifications....................................... 4

2-3 Spectrum for Li

ht Sensor.........................................5

3. FRONT PANEL DESCRIPTION.................................... 6

3-1 Display.............................................................

3-2 Power Button.................................................... 6

3-3 Hold Button......................................................

3-4 REC ( Max/Min ) Button..................................... 6

3-5 Lux/Fc ( Ft-cd ) Button......................................

3-6 Range Button....................................................6

3-7 Zero Button......................................................

3-8 Light Source Button...........................................6

3-9 Light Sensor Input Socket.................................. 6

3-10 Stand...................................................................

3-11 Battery Compartment/Cover................................... 6

3-12 RS-232 Output.................................................

3-13 Light Sensor..................................................... 6

3-14 Sensor Cover....................................................6

3-15 Light Sensor Plug.............................................

3-16 LCD display contrast adjust VR.......................... 6

4. MEASURING PROCEDURE......................................... 7

5. AUTO POWER OFF DISABLE.....................................

6. RS232 PC SERIAL INTERFACE...................................10

7. BATTERY REPLACEMENT.......................................... 11

1. FEATURES

* 5 ranges : 40.00/400.0/4,000/40,000/400,000 Lux, wide

measuring range.

* High resolution : 0.01 Lux to 100 Lux, 0.001 Ft-cd to

10 Ft-cd.

*Selection of lighting type ( Tungsten, Fluorescent,

Sodium or Mercury ).

* Sensor used the exclusive photo diode & color correction

filter, spectrum meet C.I.E. photopic.

* Sensor cosine correction factor meet standard.

* Separate Light Sensor allows user to measure the light at

an optimum position.

* Lux & Foot-candle unit selection.

* Large LCD display with bar graph and indicator.

* Water resistance front panel

* Use the rubber key for the function select.

* Microprocessor circuit ensure high accuracy, and also

and also provides special functions and features.

*LSI circuit provides high reliability and durability.

* Zero adjusting button.

* Data hold, to freeze the desired reading value.

* Peak hold measurement.

* Memory function to display the max. & min. display value

with Recall.

* Auto power auto off or manual power off.

* Compact size and excellent operation.

* Built-in low battery indicator.

* RS-232 computer serial data output.

IFI

ATI

2-1 General Specifications

Display Large LCD display.

LCD size 52 x 38 mm, 4 digits.

with bar graph indicator.

Measurement 5 ranges : 40.00 Lux, 400.0 Lux,

& ranges 4,000 Lux, 40,000 Lux, 400,000 Lux.

Unit Lux, Foot-candle ( Ft-cd ).

Lighting Type Tungsten lamp, Fluorescent lamp,

Selection Sodium lamp, Mercury lamp.

Sensor The exclusive photo diode & color

correction filter, spectrum meet C.I.E.

Cosine correction factor meet standard.

Zero Adjustment External adjustment by pushing button,

( 40.00 Lux range only )

Peak Hold To hold the peak display.

Data Hold To freeze the display value.

Memory Save the max. & min. value with Recall.

Power Off Auto or manual power off.

Over and Over range indicator : " - - - - "

Under Range Under range indicator : " _ _ _ _ "

Indication

Data Output RS-232 serial data output.

Operating 0 蚓to 50 蚓( 32 蚌to 122 蚌).

Temperature

Operating Less than 80% RH.

Humidity

Power Supply DC 9V battery. 006P, MN1604 ( PP3 )

or equivalent.

Power Approx. DC 8 mA.

Consumption

Weight 220 g/0.48 LB.

Dimension

Main instrument :

200 x 68 x 30 mm

( 7.9 x 2.7 x 1.2 inch ).

Light Sensor probe :

82 x 55 x 7 mm

( 3.2 x 2.2 x 0.3 inch ).

Accessories Instruction Manual..................

1 PC.

Light Sensor with protection cover

.............................................

1 PC.

2-2 Electrical Specifications (23 5 蚓)

Uni

Ran

In-ran

e Displa

Resolutio

40.00 Lux 0 to 40.00 Lux 0.01 Lux

Lux 400.0 Lux 36.0 to 400.0 Lux 0.1 Lux

4,000 Lux 360 to 4,000 Lux 1 Lux

40,000 Lux 3,600 to 40,000 Lux 10 Lux

400,000 Lux 10,000 to 400,000 Lux 100 Lux

4.000 Fc 0 to 3.720 Fc 0.001 Fc

Foot- 40.00 Fc 3.35 to 37.20 Fc 0.01 Fc

candle 400.0 Fc 33.5 to 372.0 Fc 0.1 Fc

( Ft-cd ) 4,000 Fc 335 to 3,720 Fc 1 Fc

40,000 Fc 930 to 37,200 Fc 10 Fc

Foot-candle = Ft-cd = F

Uni

Ran

Accurac

40.00 Lux

Lux 400.0 Lux ( 3% rd

+ 0.5 % F.S. )

4,000 Lux

40,000 Lux

400,000 Lux < 100,000 Lux :

( 3% rd

+ 0.5 % F.S. )

100,000 Lux :

@ for reference onl

4.000 Fc

Foot- 40.00 Fc ( 3% rd

+ 0.5 % F.S. )

candle 400.0 Fc

( Fc ) 4,000 Fc

40,000 Fc < 9,300 Fc :

( 3% rd

+ 0.5 % F.S. )

9,300 Fc :

@ for reference onl

Note : Accuracy tested by a standard parallel light

tungsten lamp of 2856 袁temperature.

2-3 Spectrum for Light Sensor

3. FRONT PANEL DESCRIPTION

3-1 Display 3-9 Light Sensor Input Socket

3-2 Power Button 3-10 Stand

3-3 Hold Button 3-11 Battery Compartment/Cover

3-4 REC ( Max/Min ) Button 3-12 RS-232 Output

3-5 Lux/Fc ( Ft-cd ) Button 3-13 Light Sensor

3-6 Range Button 3-14 Sensor Cover

3-7 Zero Button 3-15 Light Sensor Plug

3-8 Light Source Button 3-16 LCD display contrast adjust VR.

MEASURING PROCEDURE

1)Push the " Power Button " ( 3-2, Fig. 1 ) to switch the

instrument on.

2)Select the desired measuring unit by pressing the " Lux/Fc

Button " ( 3-5, Fig. 1 ). The display will indicate the

selected unit of " Lux " or " Ft-cd ".

3)Determine the lighting type ( Tungsten, Fluorescent,

Sodium or Mercury lamp) by pressing the " Light

Source Select Button " ( 3-8, Fig. 1 )

Note :

a. For the different lighting type, the LCD will indicate

the following symbols :

Tungsten : Fluorescent :

Mercury : Sodium :

b. For the unknown light type, then please select the

" Tungsten Light " type.

4) Select the max. range by using the " Range Button " ( 3-6,

Fig. 1 ).

a. If the main display shows " - - - - ", it indicates

overload condition, select the next higher range.

b. If the main display shows "_ _ _ _ ", it indicates

out-of-range, select the next lower range.

c. As intend to get more accuracy reading, try to select

the range that it have the high resolution

5) Position the " Light Sensor " ( 3-13, Fig. 1 ) directly

under the light source. 7

6)Zero adjustment

a. Cover the " Light Sensor " ( 3-13, Fig, 1 ) using the

"Sensor Cover " ( 3-14, Fig. 1 ).

b. Set to 40.00 Lux range.

c. Pushing the " Zero Button " ( 3-7, Fig. 1 ), LCD will reach

to zero values.

d. Upon completion, remove the sensor cover.

Note :

For precision measurement, only the 40.00 Lux

range need to make Zero Adjustment.

7) Data Hold

a. During the measurement, pushing the " Hold Button "

( 3-3, Fig. 1 ) will hold the measured value & the LCD

will indicate " HOLD " symbol.

b. Push the " Hold Button " again to release the data hold

function.

8)Peak Hold

a. During the measurement, pushing the " Hold Button "

( 3-3, Fig. 1 ) at least 2 to 3 seconds continuously, the

meter will execute the Peak Hold function and at the

same time LCD display will show the " Peak HOLD "

indicator.

b. During execute the Peak Hold function, pushing the

" Hold Button " ( 3-3 , Fig. 1 ) once a while will clear

the Peak Value from the display and enter the new

Peak Value again.

c. When execute the Peak Hold function, pushing the

"Hold Button " ( 3-3 , Fig. 1 ) at least 2 seconds

continuously will cancel the Peak Hold function, the

the " Peak HOLD " indicator will be disappeared.

Tabla de contenidos

Otros manuales de Instrumento de medición de MRC

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario