.
!
SAFETY INSTRUCTIONS
Only process materials that Mr Beam Lasers
has classified as harmless. A current list of
materials can be found at mr-beam.org
Never process PVC, Vinyl, ABS, coated carbon
fiber, fiberglass or other materials containing
chlorine!
Processing these materials with your
Mr Beam II will produce extremely toxic
vapours, which can cause machine damage
and health hazard.
Before using your Mr Beam II, read and
understand the user manual and the
safety instructions.
You can find the latest manual and safety
instructions in the menu of your Mr Beam II
user interface and on mr-beam.org
You will find the latest update of this
Quickstart Guides and some other informa-
tions about your Mr Beam II at the following
QR Code.
At mr-beam.org/faq you will also find
answers to many questions around the
Mr Beam II.
