Moxa Technologies OnCell G3111 Manual de usuario

P/N: 1802031010012

*1802031010012*

OnCell G3101/G3201 Series

Quick Installation Guide

Edition 2.1, August 2016

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

There are currently four models in the OnCell G3101/G3201 series of

IP-modems: the OnCell G3111, OnCell G3151, OnCell G3211, and OnCell

G3251. The main difference between the models is the serial interface

type and number of ports. The OnCell G3101/G3201 industrial RS-232,

RS-232/422/485 GSM/GPRS IP modems are some of the most affordable,

and versatile products available in the cellular networking market today.

These modems also provide remote access and TCP/IP support, and can

be configured over a network.

Package Checklist

Moxa’s OnCell G3101/G3201 Series is shipped with the following items. If

any of these items is missing or damaged, please contact your customer

service representative for assistance.

Standard Accessories

•Omni 1 dBi rubber SMA antenna

•(model name: ANT-CQB-ASM-01)

•DIN-rail kit

•DC Power Supply (screw-on)

•Rubber stand

•Product warranty statement

•Quick installation guide (printed)

•Warranty card

Optional Accessories

•Quad-band GSM/GPRS antennas for OnCell G3101/G3201 series

(impedance = 50 ohms):

ANT-CQB-AHSM-00-3m: Omni 0dBi/10cm, magnetic SMA

quad-band antenna (impedance = 50 ohms), 3 m

ANT-CQB-AHSM-03-3m: Omni 3dBi/25cm, magnetic SMA

quad-band antenna (impedance = 50 ohms), 3 m

ANT-CQB-AHSM-05-3m: Omni 5dBi/37cm, magnetic SMA

quad-band antenna (impedance = 50 ohms), 3 m

Note: Please notify your sales representative if any of the above items are

missing or damaged.

- 3 -

Hardware Introduction

Top View

Front Views

Rear Views

Bottom Views

Reset Button

Press and hold the Reset button for 5 second to load factory defaults: Use

a pointed object, such as a straightened paper clip or toothpick, to press

the reset button. This will cause the Ready LED to blink on and off. The

factory defaults will be loaded once the Ready LED stops blinking (after

about 5 seconds). At this point, you should release the reset button (the

default IP is 192.168.127.254).

- 4 -

LED Indicators

The LED indicators on the front panel of the OnCell G3101/G3201 are

described in the following table.

Type

Color

LED Function

PWR

Green

Activation of DC Power.

Off

Power is off, or power error condition exists.

TX/RX

Green

The serial port is transmitting data.

Amber

The serial port is receiving data.

Off

No data is being transmitted or received

through the serial port.

GSM/GPRS

Green

GSM is connected.

Amber

GPRS is connected.

Off

GSM/GPRS is disconnected.

Ready

Green

Steady on: Software Ready.

Blinking slowly (1 second): The OnCell has

been located by the OnCell Search Utility.

Red

(Over

Green)

Steady on: Booting up, or IP fault.

Blinking rapidly (0.5 second): IP conflict.

Blinking slowly (1 second): Cannot get an IP

address from the DHCP server.

Off

Booting up or there is no error condition.

Signal

(3 LEDs) Green

Number of lit LEDs indicates signal level

(at least 2 LEDs must illuminated for data

transmission)

Adjustable pull high/low resistor for RS-485 Port

DIP switches on the bottom of the OnCell G3151/G3251 are used to set

the pull high/low resistor value for each serial port.

Pull High

Pull Low

Terminator

–

1 KΩ

120 Ω

–

OFF

150 KΩ

–

NOTE

If the pull high/low resistor on your device is already set for

-485, make sure the default SW for RS-

232 is “OFF” when you

switch back to RS-232 interface.

Hardware Installation Procedure

STEP 1: Open the SIM cover, and insert the SIM card in the SIM card slot.

STEP 2: Connect the 12-48 VDC power adaptor to the OnCell

G3101/G3201 series and then plug the power adaptor into a DC outlet.

STEP 3: To configure the OnCell, use an Ethernet cable to connect the

OnCell directly to your computer’s Ethernet interface.

STEP 4: Connect the OnCell G3101/G3201 series’s serial port to a serial

device.

- 5 -

DIN-Rail Mounting

The OnCell G3101 and G3201 series have built-in

“ears” for attaching the IP modem to a wall or the

inside of a cabinet. We suggest using two screws per

ear to attach the IP modem to a wall or the inside of

a cabinet. The heads of the screws should be less

than 6.0 mm in diameter, and the shafts should be

less than 3.5 mm in diameter, as shown in the figure

at the right.

Software Installation Information

The User’s Manual, OnCell Search Utility, and OnCell Driver Manager can

be downloaded from the Moxa website at www.moxa.com. Please refer to

the User’s Manual for additional details on using the OnCell Search Utility

and Driver Manager.

Pin Assignments and Cable Wiring

DB9 Male Port Pinouts

Note that the OnCell G3111 and G3211 only support RS-232. The

RS-422/485 pin assignments only apply to the OnCell G3151 and G3251.

DB9 Male

OnCell G3111/G3211 (RS-232)

RS-232

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

–

DB9 Male

OnCell G3151/G3251 (RS-232/422/485)

RS-232

RS-422/485-4w

RS-485-2w

DCD

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

- 6 -

Specifications

Cellular Interface

Standards

GSM/GPRS

Band Options

Quad-band 850/900 and 1800/1900 MHz

GPRS Multi-slot Class

Class 10

GPRS Terminal Device

Class

Class B

GPRS Coding Schemes

CS1 to CS4

Tx Power

1 watt GSM 1800/1900, 2 watts EGSM 850/900

SIM Control

3 V

LAN Interface

Number of Ports

1 (For configuration only)

Ethernet

10/100 Mbps, RJ45 connector, Auto MDI/MDIX

Magnetic Isolation

Protection

1.5 KV built-in

SIM Interface

Number of SIMs

SIM Control

3 V

Serial Interface

Number of Ports

1 or 2

Serial Standards

G3111: 1 RS-232 port

G3151: 1 RS-232/422/485 port

G3211: 2 RS-232 ports

G3251: 2 RS-232/422/485 ports

ESD Protection

15 KV

Power EFT/

Surge Protection

2 KV

Serial Communication Parameters

Parity

None, Even, Odd, Space, Mark

Data Bits

5, 6, 7, 8

Stop Bit(s)

1, 1.5, 2 (when parity = None)

Flow Control

RTS/CTS, XON/XOFF

Baudrate

50 bps to 921.6 Kbps

Serial Signals

RS-232

TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422

Tx+, Tx-, Rx+, Rx-, GND

RS-485-4w

Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w

Data+, Data-, GND

Management Software

OnCell Central Manager

Centralized management solution for accessing

private IPs from the Internet

(For Software download, Please check on www.moxa.com)

Physical Characteristics

Housing

Aluminum, providing IP30 protection

Dimensions

111 x 77 x 26 mm (4.37 x 3.03 x 1.02 in)

Power Requirements

Number of Power Inputs

1 power jack

Input Voltage

12 to 48 VDC

Data Link

335 to 900 mA (peak) @ 12 V

- 7 -

Environmental Limits

Operating Temperature

-30 to 55°C (-22 to 131°F)

Operating Humidity

5 to 95% RH

Storage Temperature

-40 to 75°C (-40 to 167°F)

Regulatory Approvals

EMC

CE Class A , FCC Class A, UL

Warranty

Warranty Period

5 years

Otros manuales para OnCell G3111

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Módem de Moxa Technologies

Moxa Technologies

Moxa Technologies OnCell G3100 Series Manual de usuario

Moxa Technologies

Moxa Technologies OnCell G3111 Manual de usuario

Moxa Technologies

Moxa Technologies OnCell G2151I Series Manual de usuario

Moxa Technologies

Moxa Technologies OnCell G3111 Manual de usuario

Moxa Technologies

Moxa Technologies OnCell G3100 Series Manual de usuario

Moxa Technologies

Moxa Technologies oncell G2100 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort Express Manual de usuario

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario