Moxa Technologies MGate W5108 series Manual de usuario

P/N: 1802051080012

*1802051080012*

MGate W5108/W5208 Series

Quick Installation Guide

Version 2.1, November 2019

Technical Support Contact Information

www.moxa.com/support

Moxa Americas

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office)

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045

- 2 -

Overview

The MGate W5108/W5208 series of gateways comes with one or two

serial ports, making them an ideal choice for connecting Modbus/DNP3

serial devices to a wireless LAN. With IEEE 802.11a/b/g/n support, you

can use fewer cables in difficult wiring environments, and for secure

data transmission, the MGate W5108/W5208 series of gateways

supports WEP/WPA/WPA2. The gateways’ rugged design makes them

suitable for industrial applications, including oil and gas, power plant,

process automation, and factory automation.

Package Checklist

Before installing the MGate W5108/W5208 gateway, verify that the

package contains the following items:

•1 MGate W5108 or W5208 gateway

•1 antenna

•Quick installation guide (printed)

•Warranty card

Optional Accessories

•Mini DB9F-to-TB Adapter: DB9-female-to-terminal-block adapter

for RS-422/485 applications

•WK-51-01: Wall-mounting kit

Notify your sales representative if any of the above items are missing

or damaged.

Hardware Introduction

As shown in the following figures, the MGate W5108 has one DB9 port

for transmitting serial data, and the MGate W5208 has two DB9 ports

for transmitting serial data. The MGate W5108/W5208 gateways come

with 2 kV serial port isolation protection built in.

- 3 -

MGate W5108

MGate W5208

- 4 -

Reset Button—Depress the Reset button continuously for 5 sec. to

load factory defaults.

The reset button is used to load factory defaults. Depress the reset

button for five seconds using a pointed object, such as a straightened

paper clip. Release the reset button when the Ready LED stops blinking.

LED Indicators

Name

Color

Function

PWR 1,

PWR 2

Green

Power is being supplied to the power input.

Off

The power cable is not connected.

Ready

Green

Steady on: Power is on and unit is functioning

normally.

Blinking: Unit is responding to DSU’s locate

function.

Red

Steady on: Power is on and the unit is booting up.

Blinking: IP conflict, DHCP, or BOOTP server did not

respond properly, or a relay output occurred.

Off

Power is off.

P1, P2

Green

Serial port is transmitting data.

Amber

Serial port is receiving data.

Off

Data is not being transmitted.

Ethernet

Green

Indicates a 100 Mbps Ethernet connection.

Amber

Indicates a 10 Mbps Ethernet connection.

Off

Ethernet cable is disconnected.

WLAN

Green

Steady On: Unit is properly connected with the AP.

Blinking: Unit is trying to connect to the AP.

Red

Indicates an IP conflict, or DHCP or BOOTP server is

not responding properly.

RF Green

3 LEDs = the signal strength is between 67% and

100%.

2 LEDs = the signal strength is between 34% and

66%.

1 LED = the signal strength is between 0% and

33%.

Hardware Installation Procedure

STEP 1:

After unpacking the unit, connect the power supply to the

unit.

Make sure the adapter is connected to an earthed

socket.

STEP 2:

Use an Ethernet cable to connect the unit to the network.

STEP 3:

Connect your device to the desired port on the unit.

STEP 4:

Place or mount the unit. The unit may be placed on a

horizontal surface such as a desktop, or mounted on the

wall.

- 5 -

Wall or Cabinet Mounting

Two metal plates are provided for mounting the

unit on a wall or inside a cabinet. Attach the

plates to the unit’s rear panel with screws. With

the plates attached, use screws to mount the unit

on a wall. The heads of the screws should be 5

7 mm in diameter, the shafts should be 3

to 4

mm in diameter, and the length of the screws

should be more than 10.5 mm.

For each screw, the head should be 6 mm or less in diameter, and the

shaft should be 3.5 mm or less in diameter.

Termination Resistor and Adjustable Pull High/Low Resistors

In some critical environments, you may need to add termination

resistors to prevent the reflection of serial signals. When using

termination resistors, it is important to set the pull high/low resistors

correctly so that the electrical signal is not corrupted. The MGate

W5108/W5208 uses DIP switches to set the pull high/low resistor

values for each serial port.

To add a 120-ohm termination resistor, set switch 3 on the port’s

assigned DIP switch to ON; set switch 3 to OFF (the default setting) to

disable the termination resistor.

To set the pull high/low resistors to 150 kilo-ohms, set switches

1 and 2 on the port’s assigned DIP switch to OFF. This is the default

setting.

To set the pull high/low resistors to 1 kilo-ohm, set switches 1

and 2 on the port’s assigned DIP switch to ON.

Pull High/low Resistors for the RS-485 Port

Default

Pull High

Pull Low

Terminator

1 kilo-ohm

120 ohms

OFF

150 kilo-ohms

–

Software Installation Information

To configure your MGate W5108/W5208, connect the gateway’s

Ethernet port directly to your computer’s Ethernet port and then log in

from a web browser.

Default IP address: 192.168.127.254

Default account: admin

Default password: moxa

If you forget the modified IP address of the gateway or cannot log in to

the gateway via a web browser for any reason, you can access the

gateway via a direct Ethernet cable connection using the Device

Search Utility (DSU) to search for the gateway.

To install the DSU, download it from Moxa’s website at

http://www.moxa.com.

- 6 -

For detailed information about DSU, refer to the MGate

W5108/W5208 User’s Manual, which can be downloaded from

Moxa’s website at http://www.moxa.com.

Pin Assignments

RJ45 (LAN)

LAN

Tx+

Tx-

Rx+

–

Rx-

–

DB9 Male (RS-232/422/485)

Pin RS-232

RS-422/

RS-485-4W

RS-485-2W

DCD

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Power Input and Relay Output Pinouts

V2+ V2-

V1+ V1-

DC Power

Input 2

DC Power

Input 2

N.O. Common N.C.

DC Power

Input 1

DC Power

Input 1

DI/DO Pinouts

COM

DI0

DI1

GND

DO0

DO1

Common Digital

Input 0

Digital

Input 1

Ground Digital

Output 0

Digital

Output 1

- 7 -

Specifications

Power Input

9 to 60 VDC

Power Consumption

9 to 60 VDC, 500 mA (max.)

Operating Temperature

Standard Models: 0 to 60°C (32 to 140°F)

Wide Temp. Models: -40 to 75°C (-40 to

167°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

IECEx and ATEX Information

1. ATEX certificate number: DEMKO 16 ATEX 1641X

2. IECEx number: IECEx UL 16.0005X

3. Certification string: Ex nA nC IIC T4 Gc

Ambient Range : -40°C ≤Tamb ≤75°C

4. Standards covered:

EN 60079-0:2012+A11:2013/IEC 60079-0:2011 Ed.6

EN 60079-15:2010/IEC 60079-15:2010 Ed.4

5. The conditions for safe usage:

•Equipment should be installed in an enclosure that provides a

degree of protection not less than IP54 in accordance with EN

60079-15 and should be accessible only by the use of a tool.

•These products are for use in an area of not more than

pollution degree 2 in accordance with IEC 60664-1.

Address of manufacturer: Fl. 4, No. 135, Lane 235, Baoqiao Rd.,

Xindian Dist., New Taipei City, 23145, Taiwan, R.O.C.

Otros manuales para MGate W5108 series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Puerta de Moxa Technologies

Moxa Technologies

Moxa Technologies OnCell Series Manual de usuario

Moxa Technologies

Moxa Technologies OnCell G3150A-LTE-EU-T Manual de usuario

Moxa Technologies

Moxa Technologies MGate 4101-MB-PBS Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5101-PBM-MN Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5103 Manual de usuario

Moxa Technologies

Moxa Technologies MRC-1002 Series Manual de usuario

Moxa Technologies

Moxa Technologies MGate MB3180 Manual de usuario

Moxa Technologies

Moxa Technologies MGate 4101-MB-PBS Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5111 Manual de usuario

Moxa Technologies

Moxa Technologies MGate W5108 series Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP Manual de usuario

Moxa Technologies

Moxa Technologies OnCell G3111-HSPA series Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5101-PBM-MN Manual de usuario

Moxa Technologies

Moxa Technologies MGate-4101-MB-PBS Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5217 Series Manual de usuario

Moxa Technologies

Moxa Technologies MGate-4101-MB-PBS Manual de usuario

Moxa Technologies

Moxa Technologies MGate 4101-MB-PBS-T Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5122 Series Manual de usuario

Moxa Technologies

Moxa Technologies AIG-101 Series Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5114 Manual de usuario

Moxa Technologies

Moxa Technologies OnCell G3150A-LTE Manual de usuario

Moxa Technologies

Moxa Technologies SMG-6100 Manual de usuario

Moxa Technologies

Moxa Technologies MGate MB3170 Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5118 Series Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario