Movisens EdaMove 4 Guía rápida
EdaMove 4
EDA and Physical Activity Sensor
Operating and Safety Instructions
2
Imprint
EdaMove 4 Operating and Safety Instructions
Version: 21.08.2019
movisens GmbH
Augartenstraße 1
76137 Karlsruhe
Germany
Phone: +49 721 381344-0
Fax: +49 721 381344-90
Internet: www.movisens.com
E-Mail: [email protected]om
© Copyright: movisens GmbH
3
1Welcome!
Dear customer,
Thank you for choosing the EDA (Electrodermal Activity) and Physical
Activity Sensor EdaMove 4 from movisens. With this sensor, you get the
newest technology for mobile monitoring of EDA and physical activity in
everyday life.
Please read this manual completely and thoroughly before bringing the
measurement system into service!
In this manual you will find the most relevant operating instructions and the
safety instructions.
Please find the full movisens documentation here:
docs.movisens.com
If you have any further questions, don’t hesitate to contact us. It is our
pleasure to help you:
Phone: +49 721 381344-0
E-Mail: support@movisens.com
4
2Intended use
EdaMove 4 is a scientific research instrument that captures the EDA
(electrodermal activity), the physical activity and other secondary
parameters derivable from these measurement signals. EdaMove 4 is
designed and tailored for the use in research applications.
The physical activity sensor EdaMove 4 is not a medical device!
The sensor acquires a single channel EDA signal using two Ag/AgCl
electrodes. The EdaMove 4 uses the exosomatic measurement method,
applying a DC voltage of 0.5V to the skin to acquire skin conductance.
The sensor measures the physical activity of a person based on the
acquisition of acceleration in three dimensions and atmospheric air
pressure. Moreover the sensor also records the rotation rate and the
ambient temperature.
The sensor configuration occurs via a USB 2.0 connection to a Windows PC
using the Sensor Manager software.
3Explanation of Symbols
Caution.
Read the manual and the safety instructions to
find out about possible hazards and the needed
actions to avoid these hazards!
5
4Safety Instructions
Please follow these safety instructions. Improper use of the product may
impair/affect the protection provided by the product and cause product
damage or personal/physical injury:
!EdaMove 4 is not a medical device. Do not use it for a
medical purpose.
!Only use EdaMove 4 for the intended use.
!Carefully read and follow the cleaning instructions.
!Use adhesive electrodes only once.
!For long term measurements (> 1 day) we suggest wearing
pauses of at least 20min per day.
!If any problems occur by wearing the sensor, band or
electrodes (e.g. pressure marks, skin irritations or other
discomfort), stop using the system immediately.
!Only use the EdaMove 4 under the specified environmental
conditions.
!To charge the battery of EdaMove 4, only use USB 2.0
standard compatible devices.
!Charge the sensor only at ambient temperatures below 45°C.
!The use of the cradle is only intended for indoor use.
!Never open EdaMove 4.
6
!The battery of EdaMove 4 may only be changed by the
manufacturer.
5Scope of Delivery
The following components are included in delivery:
Article
Order No.
EdaMove 4
EDA and Physical Activity Sensor,
Cradle,
Micro USB cable,
Operating and safety instructions
10403
To be able to do measurements a PC is needed in addition to the scope of
delivery.
6Accessories
The following accessories can be ordered optionally:
Article
Order No.
Wrist Band Eda Move 4(S)
Size: S
Wrist Measurement: 13 to 16 cm
30441
Wrist Band Eda Move 4 (M)
Size: M
Wrist Measurement: 15 to 18 cm
30442
Wrist Band Eda Move 4 (L)
Size: L
Wrist Measurement: 17 to 23 cm
30443
7
Wrist Band Eda Move 4 (XL)
Size: XL
Wrist Measurement: 20 to 28 cm
30444
Cradle 4
Cradle for Move 4
with Micro USB Interface
30400
USB Charger
USB Charger for 110-240V
30100
USB Hub
USB Hub 2.0, 7 Ports
30101
Micro USB Cable
30102
7Consumables
The following consumables can be ordered optionally:
Article
Order No.
Alcohol Pads (100 pcs.)
Single-use alcoholic wipes for
skin cleansing
Saturated with 70% isopropyl
alcohol
40103
8
Size of unfolded wipes: 30 x 65
mm
EDA Adhesive Electrodes (30
pcs.)
EDA Electrode Type 10-W 55 GS,
Structure fabric with special gel /
solid gel, diameter 55mm
40400
EDA Adhesive Tape (10 m)
Skin-friendly adhesive fleece for
fixation, white polyester fleece,
coated with skin-friendly
polyacrylate adhesive, permeable
to air and water vapor, secure
adhesion, elastic
40401
Meliseptol Rapid (250 ml)
Ready-to-use alcoholic
disinfectant for spraying or
wiping.
40410
8Description of the Sensor
The EdaMove 4 is a mobile sensor that measures electrodermal (EDA) and
physical activity. The EDA signal is assessed by an exosomatic measurement
with DC (direct current), using a constant voltage system supplying 0.5 Vdc.
The measurable bandwidth for EDA signals in the literature is from 0 to 5Hz
when a DC voltage is applied to the skin. The EdaMove 4 uses a sample
rate of 32 Hz, to achieve an ideal tradeoff between exact determination of
skin conductance reaction timing and preserving memory and battery.
The EdaMove 4 comes equipped with connectors for adhesive electrodes
for high quality recordings.
9
There are two attachment points for the sensor electrodes –either the palm
or the ankle. The attachment process for the hand is detailed in chapter 7.4.
The same principles apply when the sensor needs to be attached to the
ankle.
EdaMove 4 is also equipped with a Bluetooth Smart interface. The sensor
can be used in conjunction with a gateway or a mobile phone for live
applications. The Bluetooth Smart interface is activated in the default
configuration of the sensor. To deactivate this interface, a firmware update
is required.
The axes of the integrated acceleration sensor are defined as described in
the following figure:
10
9User interface and indicators
EdaMove 4 is equipped with a multi-colored LED to show the status of the
sensor:
Status-LED
Meaning
Flashing red (once
per second)
The sensor is active and records
data
Flashing red
slowly (every two
seconds)
Delayed recording active
Flashing green
The sensor is connected to a PC or
a charger. The battery is fully
charged.
Flashing blue
The sensor is connected to a PC or
a charger. The battery is actually
being charged.
Flashing magenta
The sensor is active and records
data. It is connected to a charger.
The battery is actually being
charged.
Flashing yellow
The sensor is active, records data. It
is connected to a charger. The
battery is fully charged.
Flashing blue fast
(three times per
second)
The battery is low, sensor will turn
off soon.
Flashing red fast
(three times per
second)
An Error occurred. Reset the sensor
with the Reset Sensor Program. If
Otros manuales para EdaMove 4
1
Tabla de contenidos
Otros manuales de Accesorios de Movisens
