Movisens EcgMove 4 Guía rápida
EcgMove 4
ECG and Physical Activity Sensor
Operating and Safety Instructions
3
1Welcome!
Dear customer,
Thank you for choosing the ECG and Physical Activity Sensor EcgMove 4
from movisens. With this sensor, you get the newest technology for mobile
monitoring of ECG and physical activity in everyday life.
Please read this manual completely and thoroughly before bringing the
measurement system into service!
In this manual you will find the most relevant operating instructions and the
safety instructions.
Please find the full movisens documentation here:
docs.movisens.com
If you have any further questions, don’t hesitate to contact us. It is our
pleasure to help you:
Phone: +49 721 381344-0
E-Mail: support@movisens.com
4
2Intended use
EcgMove 4 is a scientific research instrument that captures the ECG,
physical activity, and other secondary parameters derivable from these
measurement signals. EcgMove 4 is designed and tailored for use in
research applications.
The ECG and physical activity sensor EcgMove 4 is not a medical
device!
The sensor acquires a single channel ECG signal and can be used with a dry
electrode chest belt or with disposable electrodes. In addition to capturing
the ECG signal, the sensor records the physical activity of a person through
the acquisition of acceleration in three dimensions, the angular rate
(gyroscope) and atmospheric air pressure. Moreover the ambient
temperature is acquired.
The sensor configuration occurs via a USB 2.0 connection to a Windows PC
using the Sensor Manager software.
3Explanation of Symbols
Caution.
Read the manual and the safety instructions to
find out about possible hazards and the needed
actions to avoid these hazards!
5
4Safety Instructions
Please follow these safety instructions. Improper use of the product may
impair/affect the protection provided by the product and cause product
damage or personal/physical injury:
!EcgMove 4 is not a medical device. Do not use it for a medical
purpose.
!Only use EcgMove 4 for the intended use.
!Carefully read and follow the cleaning instructions.
!Use adhesive electrodes only once.
!For long term measurements (> 1 day) we suggest wearing pauses
of at least 20min per day.
!If any problems occur by wearing the sensor, chest belt or
electrodes (e.g. pressure marks, skin irritations or other discomfort),
stop using the system immediately.
!Only use the EcgMove 4 under the specified environmental
conditions.
!To charge the battery of EcgMove 4, only use USB 2.0 standard
compatible devices.
!Charge the sensor only at ambient temperatures below 45°C.
!The use of the cradle is only intended for indoor use.
!Never open EcgMove 4.
!The battery of EcgMove 4 may only be changed by the
manufacturer.
6
5Scope of Delivery
The following components are included in delivery:
Article
Order No.
EcgMove 4
ECG- and Activity Sensor,
Cradle,
Micro USB cable,
Operating and safety instructions
10402
To be able to do measurements a PC is needed in addition to the scope of
delivery.
6Accessories
The following accessories can be ordered optionally:
Article
Order No.
Chest Belt (XS)
For EcgMove 4 and EcgMove 3
Size: XS, Underbust Measurement: 51 to 59 cm
30420
Chest Belt (S)
For EcgMove 4 and EcgMove 3
Size: S, Underbust Measurement: 58 to 66 cm
30421
Chest Belt (M)
For EcgMove 4 and EcgMove 3
Size: M, Underbust Measurement: 66 to 81 cm
30422
Chest Belt (L)
30423
7
For EcgMove 4 and EcgMove 3
Size: L, Underbust Measurement: 80 to 110 cm
Chest Belt (XL)
For EcgMove 4 and EcgMove 3
Size: XL, Underbust Measurement: 110 to 166
cm
30424
Cradle 4
Cradle for EcgMove 4
with Micro USB Interface
30400
USB Charger
USB Charger for 110-240V
30100
USB Hub
USB Hub 2.0, 7 Ports
30101
Micro USB Cable
30102
7Consumables
The following consumables can be ordered optionally:
Article
Order No.
Alcohol Pads (100 pcs.)
Single-use alcoholic wipes for skin cleansing
Saturated with 70% isopropyl alcohol
Size of unfolded wipes: 30 x 65 mm
40103
ECG Electrodes (30 pcs.)
40104
Meliseptol Rapid (250 ml)
Ready-to-use alcoholic disinfectant for spraying
or wiping.
40410
8
8Description of the Sensor
EcgMove 4 can either be used
⚫with a comfortable chest belt with dry electrodes
⚫with two disposable electrodes
For long term measurements the belt is more comfortable. For short term
measurements the disposable electrodes may be more practical.
Included in the delivery you also receive a cradle with a micro USB interface.
To connect the sensor to a PC, you have to separate it from the chest belt
or the electrodes and plug it into the cradle.
EcgMove 4 is also equipped with a Bluetooth Smart interface. The sensor
can be used in conjunction with a gateway or a mobile phone for live
applications. The Bluetooth Smart interface is activated in the default
configuration of the sensor. To deactivate this interface, a firmware update
is required.
The sensor can be attached to the belt by
two snap fasteners.
If used with disposable electrodes, the
electrodes are attached directly to the
sensor.
9
9User interface and indicators
EcgMove 4 is equipped with a multi-colored LED to show the status of the
sensor:
Status-LED
Meaning
Flashing red (once
per second)
The sensor is active and records
data
Flashing red
slowly (every two
seconds)
Delayed recording active
Flashing green
The sensor is connected to a PC or
a charger. The battery is fully
charged.
Flashing blue
The sensor is connected to a PC or
a charger. The battery is actually
being charged.
Flashing magenta
The sensor is active and records
data. It is connected to a charger.
The battery is actually being
charged.
Flashing yellow
The sensor is active, records data. It
is connected to a charger. The
battery is fully charged.
Flashing blue fast
(three times per
second)
The battery is low, sensor will turn
off soon.
Flashing red fast
(three times per
second)
An Error occurred. Reset the sensor
with the Reset Sensor Program. If
10
the sensor doesn’t stop flashing,
please contact the manufacturer.
No LED active
The sensor is inactive.
Combinations of red and green blinking as well as red and blue blinking are
possible with the appropriate combination of the above described
meanings.
EcgMove 4 features a vibration alarm. It vibrates two times when a marker
is set. During measurement a marker can be set by double tapping on the
front of the sensor.
10 Software Installation
Please ensure that your PC fulfills the requirements:
⚫A PC with Microsoft Windows 7 or higher, 64bit
⚫USB 2.0 Port
⚫Administrator rights during installation
⚫A minimum of 300 MB free space on hard disc
Step 1: Download the SensorManager from the movisens Website
Step 2: Double click the file “movisens_SensorManager_Setup.exe“
✓The Installation runs automatically in the background. After successful
installation, shortcuts are created in the Windows Start Menu under the
entry “movisens SensorManager”.
Step 3: Download the UnisensViewer from the movisens Website:
Step 4: Double click the file “UnisensViewer_Setup_Full.exe“
Otros manuales para EcgMove 4
1
Tabla de contenidos
Otros manuales de Accesorios de Movisens
