1. INTRODUCTION
The 4K HDMI & USB over IP Extender is a solution for audio, video and USB
signal extension via LocalArea Network (LAN). It can be used as audio,
video and KVM extender over IP and applied to point to point, point to
multi-point, multi-point to multi-point and video wall broadcast system
controlled by USB, RS232, IR and configured the 4K HDMI & USB over IP
Extender by WEB GUI and PC GUI. An easy installation system built up with
Gigabit Ethernet switch which has IGMP function and CATx cable for
extension or broadcast.
2. FEATURES
•4k UHD HDMI over IP/Fiber Extension
•USB2.0 over IP extension
•Transmission distance 120m over single Cat5e/6 cable
•Fiber optical up to 60KM (Single Mode)
•Input 4k@60hz YUV 420 (Max), output 4k@30hz (Max)
•HDCP 2.2 / HDCP1.4 compliant
•Bi-Directional Wide Band IR (38KHZ-56KHZ) Pass through
•RS232 pass through and control, Telnet command
•IR remote/Button to control the Group ID,
•LED to show the Group ID
•Dolby True HD, DTS-HD Master Audio
•Input audio: SPDIF 5.1 and L/R Stereo analog Line mixed
•Output audio: SPDIF 5.1 and L/R Stereo Analog audio extraction
•Unicast, Multicast, Video Wall system (Max 8x16), Output video
Rotation
•10-Gigabit IGMP Ethernet Switch can be cascaded for many layers
•802.3af compliant POE, no need power supply when connecting
with POE IGMP Switch
