Move DECKSCN-MA0 Manual de usuario
Quick installation guide and system operation
Important safety, compliance and warranty information
Instruction Manual
Single Channel Node
Move S.r.l.
Piazza Cavour 7, 20121 Milan - Italy
Via Guglielmo Lippi Francesconi 1256/J, 55100 Lucca - Italy
P.IVA: 09887990969
MOVE SOLUTIONS CUSTOMER ASSISTANCE SERVICE
Visit the website at www.movesolutions.it for contact information
relating to oce addresses and telephone numbers.
Single Channel Node
Instruction Manual
English
Read Manual Before Product Use
NOTICE OF PUBLICATION:
The information contained in this manual may be subject to change without notica-
tion. For further instructions, more detailed information, product specications and
to download up-to-date manuals, visit our website at www.movesolutions.it .
PUBBLICATION
Printed in Italy
June 2023
LICENSE AND COPYRIGHT
© 2021 Move S.p.a. All rights reserved.
4
Instruction manual - EN
Index
1. Warnings ....................................................................6
FCC Compliance ....................................................................8
ISED Compliance ...................................................................9
SYMBOLS and provisions used in the documentation.......................... 10
2. General description ................................................... 12
3. Technical Data ........................................................... 15
3.1 Technical data specic for each type of Single Channel Node .............. 16
4. What’s in the box ....................................................... 18
5. Quick guide to installation .......................................... 20
6. Wiring a probe............................................................ 21
6.1 Wiring instructions | 4 – 20 mA .............................................. 22
6.2 Wiring instructions | mV/V ................................................... 23
6.3 Wiring instructions | Voltage Output (5V) ................................... 25
6.4 Wiring instructions | Voltage Output (12V) .................................. 26
6.5 Wiring instructions | Potentiometer......................................... 27
6.6 Wiring instructions | Vibrating Wire ......................................... 28
6.7 Wiring instructions | Pt100/Pt1000 .......................................... 29
6.6 Wiring instructions | NTC .................................................... 30
7. Acquired Data ............................................................ 31
7.1 Acquisition for 4-20 mA, mV/V, Voltage (5V), Voltage (12V), Potentiometer,
Pt100/Pt1000 and NTC ........................................................... 32
5
Single Channel Node
7.2 Acquisition for Vibrating Wire................................................ 32
7.3 Additional Data ............................................................... 33
8. Installation on site ..................................................... 34
9. Move Cloud Platform™ ............................................... 36
9.1 General settings .............................................................. 36
9.2 Specic settings for 4-20 mA ................................................. 38
9.3 Specic settings for mV/V .................................................... 38
9.4 Specic settings for Voltage Output (5V) and (12V) ......................... 40
9.5 Specic settings for Potentiometer .......................................... 40
9.6 Specic settings for Vibrating Wire .......................................... 41
9.7 Specic settings Pt100/Pt1000 .............................................. 43
9.8 Specic settings NTC ......................................................... 44
10. Maintenance............................................................ 45
10.1 Changing the batteries ..................................................... 45
11. Overall Dimensions .................................................. 46
ANNEX AAbout Warmup................................................... 47
ANNEX BOptimizing battery life........................................ 48
ANNEX C Field test function .............................................. 49
ANNEX DZeroing ............................................................. 51
ANNEX ETroubleshooting ................................................. 53
6
Instruction manual - EN
Warnings
For the correct and safe operation of the product, it is recommended to read and
follow the instructions in this manual.
Great attention should be paid to the following warnings. Move Solutions shall not
be held responsible for inconveniences, damage or malfunctions due to lack of com-
pliance to the prescriptions and suggested use in this manual.
•
The declared IP rating is to be intended with both the cable gland tightened
around a cable and the lid of the product correctly screwed in place. Do not
expose the product to humidity or dust in any other condition.
•
Before use, make sure that the product conforms to the description in this
manual and that no damage is present.
•
Do not use batteries other than those specied by Move Solutions without
express approval from a Move Solutions representative.
• Before any operation on the product, disconnect the batteries.
•
The product is not intended for use in applications where safety is extremely
critical, such as medical-related applications or life-security systems.
•
On top of the prescriptions in this manual, the user should operate in compliance
with local standards for security and health, and according to the best enginee-
ring practices for a safe installation.
•
The product must be kept clear of children, animals, and any unauthorized
personnel.
•
Do not disassemble the product except when explicitly instructed in this manual,
as this could cause malfunctions and damage the product.
• Do not attempt to repair or modify the product.
•
If the product releases smoke or heat during operation, immediately disconnect
the batteries.
•
Do not expose the product to high temperatures outside the specied range
or heat sources.
• Do not expose the product to liquids of any kind and do not operate on it with
wet hands. The product can only be exposed to water when the conditions to
guarantee the IP rating are satised.
•
Do not operate on the product in extreme weather conditions that may damage
1
7
Single Channel Node
the device or the user, such as thunderstorms or snowstorms.
• Do not disperse the product or part of it in the environment.
•
Correct functioning of the product in environments with high radio activity is
not guaranteed.
• The product is compliant to all regulations concerning the fair use of ISM radio
bands. However, given the free nature of these bands, occasional conict with
nearby devices operating on the same bands cannot be fully prevented.
This product contains electronic components and batteries that must
be disposed of separately from common household waste, according
to local regulations. To ensure correct disposal of the product at
the end of its lifecycle, please refer to your local authority. Failure
to comply to the regulations could lead to penalties.
NOTE
•
In case of deterioration or loss of this manual, a compliant copy may be requested
by the customer from the manufacturer. For increased security, we suggest that
you keep a copy of this manual in a place where it cannot be damaged or lost.
8
Instruction manual - EN
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
• This device may not cause harmful interference
•
This device must accept any interference received, including interference that
may cause undesired operation.
Changes or modications not expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
9
Single Channel Node
ISED Compliance
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any inter-
ference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, e (2) l’utilisateur de l’appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
This equipment complies with Industry Canada radiation exposure limits set forth for
an uncontrolled environment.
Cet équipement est conforme à l’exposition aux rayonnements Industry Canada limites
établies pour un environnement non contrôlé.
10
Instruction manual - EN
Bold
Bold text highlights an important point
or keywords for understanding the
context.
Italic
Text in italics refers to a related topic
explained more in detail in another
chapter.
CAUTION
CAUTION indicates a potentially
hazardous situation which, if not
avoided, can result in minor or
moderate injury.
IMPORTANT
IMPORTANT indicates a potentially
hazardous situation which, if not
avoided, can result in property damage
or loss of product functionality.
Prohibition icons indicate actions
that must not be performed.
Fire Danger icons warn of the
possibility of re.
Electrical Danger icons warn of
the risk of electric shock.
NOTE
NOTE species the operating
environment, installation conditions,
or special conditions of use.
Symbols and provisions used
in the documentation
The following symbols and conventions are used throughout the documentation.
Please follow all warnings and instructions marked on the product.
Este manual sirve para los siguientes modelos
7
Tabla de contenidos
