6
Instruction manual - EN
Warnings
For the correct and safe operation of the product, it is recommended to read and
follow the instructions in this manual.
Great attention should be paid to the following warnings. Move Solutions shall not
be held responsible for inconveniences, damage or malfunctions due to lack of com-
pliance to the prescriptions and suggested use in this manual.
•
The declared IP rating is to be intended with both the cable gland tightened
around a cable and the lid of the product correctly screwed in place. Do not
expose the product to humidity or dust in any other condition.
•
Before use, make sure that the product conforms to the description in this
manual and that no damage is present.
•
Do not use batteries other than those specied by Move Solutions without
express approval from a Move Solutions representative.
• Before any operation on the product, disconnect the batteries.
•
The product is not intended for use in applications where safety is extremely
critical, such as medical-related applications or life-security systems.
•
On top of the prescriptions in this manual, the user should operate in compliance
with local standards for security and health, and according to the best enginee-
ring practices for a safe installation.
•
The product must be kept clear of children, animals, and any unauthorized
personnel.
•
Do not disassemble the product except when explicitly instructed in this manual,
as this could cause malfunctions and damage the product.
• Do not attempt to repair or modify the product.
•
If the product releases smoke or heat during operation, immediately disconnect
the batteries.
•
Do not expose the product to high temperatures outside the specied range
or heat sources.
• Do not expose the product to liquids of any kind and do not operate on it with
wet hands. The product can only be exposed to water when the conditions to
guarantee the IP rating are satised.
1
