Mounting Dream MD2432-03 Manual de usuario
MD2432-03 INSTALLATION INSTRUCTION
Für die Installationsanweisungen auf Deutsch, siehe Seite 10-11.
Pour l'instruction en Français, veuillez vous reporter à la page 12-13.
Para las instrucciones de la instalación en Español, favor vea la página 14-15.
Per le Istruzioni in Italiano, vedi pagina 16-17.
x3 x1
26"~55" Max:400x400mm/16x16"
Min:75x75mm/3x3"
(DE-B2)
TV
1 2
If you have any questions, please contact our customer service.
Before getting started, let’s make sure this mount is perfect for you!
1 Is your TV VESA
equal to/greater than
75x75mm/3x3"
and equal to/less than
400x400mm/16x16"?
2 Does your TV
(including accessories)
weigh less than
60 LBS (27 KG)?
4 Installation Tools
(Not Included)
Yes --- Perfect!
No --- This mount is NOT compatible.
MAX:400mm/16"
MAX:
400mm/16"
Yes --- Perfect!
No --- This mount is NOT compatible.
CAUTION:
Drywall with
wood studs?
5 Safety Caution
Solid concrete or
concrete block?
1
3 What is your wall
made of?
Band Tape
2M
2M
Pencil ScrewdriverElectrodrill Socket Wrench
1/2"(13mm)
Stud Finder Awl 7/32"(5.5mm)
Wood Drill Bit
3/8"(10mm)
Masonry Drill Bit Hammer
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, please contact customer service.
● This product is designed for use in wood stud and solid concrete wall.
- DO NOT install into drywall alone.
● The wall must be capable of supporting five times the weight of the TV and mount
combined.
● Do not apply this product to any purpose not indicated by Mounting Dream.
● Incorrect installation may result in product damage or body injury. Mounting Dream shall
bear no responsibility for any damage or injury resulted from incorrect installation,
incorrect assembly or misuse.
Parts and Hardware
WARNING:This product contains small items that could be a choking hazard if
swallowed. Before starting assembly, verify all parts are included and undamaged. For parts
shortage or damage, please contact customer service.
NOTE: Not all hardware included will be used.
1-1 Select TV Screws
TV back
Bracket Washer
Bracket
Long Screw
Spacer
No, go to PAGE 3 for detailed combination.
Yes, go to PAGE 3 for detailed combination.
TV back
2
1-2 Need Spacer?
Short Screw
Washer
TV Brackets
x2
M4x12mm
M6x12mm
M8x25mm
M4x30mm
M6x35mm
M8x45mm
M6x17mm M8x22mm
M4M6
10mm 2.5mm
Washers
Spacers
TV Screws
x4 x4
x4 x4
x4 x4
x4
x4 x4
x4 x8
x4
M8
M6
M4
3
Tips: If you need to combine M6(e) or M8(c/f) screw with 2.5mm spacer(j), you have to
remove the inner circle.
1-3 Attach the TV Brackets
Screw and washer
Spacer(s), screw and washer
No!
For wood stud installations, follow STEP 2A
For concrete installations, follow STEP 2B on PAGE 6
Parts and Hardware
Lag Bolt M8x70mm
M8 Washer
Allen Key
x4
x4
x1
4
<16mm
(5/8")
Min. Wood Stud Size:
nominal 2"(51mm)
actual 1 1/2"(38mm)
Min. Wood Stud Size:
nominal 4"(102mm)
actual 3 1/2"(89mm)
Wood Stud Installations
Concrete Wall Anchor 4pcs
CAUTION:Do not use in drywall or wood
Fischer UX10x60 R
Wall Plate
Unit x1
Mounting Template
5
7/32"
(5.5mm)
Go to Step 3 on PAGE 7.
O
Centre line
2.5"(64mm)
CAUTION: To avoid potential personal injury or property damage:
All 3 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to
the next step.
To prevent the TV falling down, the direction of the arrow should be upward as shown.
Level
Mounting Template
Bolt Head UP!
Solid Concrete or Concrete Block Installations
DANGER
2.5"
(64mm)
3/8"
(10mm)
IMPORTANT: Never drill into
the mortar between blocks.
8"(203mm)
16"(406mm)
8"(203mm)
Concrete Wall
Anchor
Min.
8"(203mm)
6
CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to
the next step.
To prevent the TV falling down, the direction of the arrow should be upward as shown.
Level
Mounting Template
Bolt Head UP!
7
60 LBS (27 kg)
Before hanging TV, please conduct "wall plate installation integrity test" first.
TV
1 2
8
4-1 TV leveling adjustment (±3°):
Loosen 4 leveling bolts on the rear of TV plate by maximum 2
turns, adjust to level, and retighten to secure.
4-2 Tilting angle adjustment (+5°/-15°)：
Pull TV to your desired angle then fasten 2 tilting bolts with
Allen key .
Tilting bolts Tilting bolts
Loosen
Tighten
-15°
+5°
9
Allen key storage: For easy adjustment, you might put the Allen key on
the wall plate as illustration.
150mm
247mm
489mm
MAX:400mm
170mm
435mm
MAX:400mm
MIN:75mm
420mm
MIN:75mm
79mm
+5°
-15°
+90°/-90°
Tabla de contenidos
Otros manuales de Soporte de TV de Mounting Dream
Mounting Dream
Mounting Dream MD2617 Manual de usuario
Mounting Dream
Mounting Dream MD2378 Manual de usuario
Mounting Dream
Mounting Dream HM2296-24K Manual de usuario
Mounting Dream
Mounting Dream MD5425 Manual de usuario
Mounting Dream
Mounting Dream MD5428 Manual de usuario
Mounting Dream
Mounting Dream HM2296-1 Manual de usuario
Mounting Dream
Mounting Dream MD2263-XLK Manual de usuario
Mounting Dream
Mounting Dream MD2104-XL Manual de usuario
Mounting Dream
Mounting Dream MD2418-MX Manual de usuario
Mounting Dream
Mounting Dream WM2163-1 Manual de usuario
Mounting Dream
Mounting Dream MD2377 Manual de usuario
Mounting Dream
Mounting Dream MD2263-XLK Manual de usuario
Mounting Dream
Mounting Dream MD2268-MK Manual de usuario
Mounting Dream
Mounting Dream MD2617-24K Manual de usuario
Mounting Dream
Mounting Dream MD2295 Manual de usuario
Mounting Dream
Mounting Dream MD2617-03 Manual de usuario
Mounting Dream
Mounting Dream MD5231 Manual de usuario
Mounting Dream
Mounting Dream HM2377 Manual de usuario
Mounting Dream
Mounting Dream MD2411-S Manual de usuario
Mounting Dream
Mounting Dream HM2268-XL Manual de usuario
