Motorola AP 7181 Manual de usuario

AP 7181 Access Point

Installation Guide

Version 1.0.0.A

March 12, 2010

68009287001

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2 Hardware Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2.1 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2.2 Deployment Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.3 Installation Methodology . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.4 Grounding Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.5 Minimum Installation Requirements . . . . . . . . . . . . . . . . . 5

2.6 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.7 Access Point Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.7.1 Site Surveys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.7.2 Root Node Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.7.3 Non Root Node Placement . . . . . . . . . . . . . . . . . . . . . . . 6

2.7.4 Mounting Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.7.5 Device Deployment Height . . . . . . . . . . . . . . . . . . . . . . . 7

2.8 Antenna Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.9 AP 7181 Power Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.9.1 Power Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Contents

2.10 Mounting an AP 7181 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.10.1 Pole Mounted Installations. . . . . . . . . . . . . . . . . . . . . . 10

2.11 Installing an AP 7181 . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.11.1 Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.11.2 AP 7181 Connections and Ports. . . . . . . . . . . . . . . . . . 11

2.11.3 LED Status Indicator Panel . . . . . . . . . . . . . . . . . . . . . 14

2.11.4 Removing the AP 7181 Kit from the Shipping Carton 15

2.11.4 Staging the Device Prior to Installation . . . . . . . . . . . . 17

2.12 Field Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

2.12.1 Bottom Mount Installation . . . . . . . . . . . . . . . . . . . . . . 25

2.12.2 Top Mount Installation. . . . . . . . . . . . . . . . . . . . . . . . . 33

2.13 Remote Panel Antenna Installation. . . . . . . . . . . . . . . . . 42

2.13.1 Preparing the AP 7181 . . . . . . . . . . . . . . . . . . . . . . . . . 45

2.13.2 Installing the Remote Panel Antenna. . . . . . . . . . . . . . 47

2.13.3 Installing the Blank Antenna Panel . . . . . . . . . . . . . . . 51

3 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

3.1 Initially Connecting to the Access Point. . . . . . . . . . . . . . 55

3.1.1 Connecting to the Access Point Using the WAN Port. . 56

3.1.2 Connecting to the Access Point Using the LAN Port . . 57

3.2 Basic Device Configuration . . . . . . . . . . . . . . . . . . . . . . . 59

3.2.1 Configuring Device Settings . . . . . . . . . . . . . . . . . . . . . 61

3.2.2 Configuring WLAN Security Settings. . . . . . . . . . . . . . 69

3.2.3 Creating a Secure Recovery WLAN . . . . . . . . . . . . . . . 71

3.2.4 Testing Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

3.2.5 Creating a Mesh Point . . . . . . . . . . . . . . . . . . . . . . . . . . 78

3.3 Where to Go From Here? . . . . . . . . . . . . . . . . . . . . . . . . . 84

4 Regulatory Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . 85

4.1 Health and Safety Recommendations . . . . . . . . . . . . . . . 85

4.1.1 Warnings for the Use of Wireless Devices . . . . . . . . . . 85

4.1.2 Potentially Hazardous Atmospheres . . . . . . . . . . . . . . . 85

4.1.3 Reducing RF Exposure - Use Properly . . . . . . . . . . . . . 85

4.2 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

4.3 FCC Regulatory Information . . . . . . . . . . . . . . . . . . . . . . 86

4.3.1 RF Exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

4.3.2 Intentional and Unintentional Radiators . . . . . . . . . . . . 86

4.3 Canada Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

5 Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

MOTOROLA and the Stylized M Logo are registered in the US Patent &

Trademark Office. All other product or service names are the property of their

Introduction 1

1Introduction

The purpose of this document is to provide installation and setup procedures for Motorola’s

AP 7181 Access Point.

The AP 7181 is a wireless broadband data system that uses mesh networking technology to

support wide-area broadband data coverage. The system offers both 2.4 GHz 802.11b/g/n

and 5.x GHz 802.11n Wi-Fi client access with 2.4 GHz 802.11 b/g/n and 5.x GHz 802.11a/

n meshing. The dual-band system supports industry standard client devices and features

easily deployed fixed infrastructure nodes.

The AP 7181 is also designed to meet the needs of large, distributed outdoor networks. The

network can be configured and managed for optimal performance using the Wireless

Manager (WM) network Management application.

The most current versions of this manual and other AP 7181 documentation can be found

at:

http://motorola.wirelessbroadbandsupport.com/support/mesh/library

1.1 Document Conventions

The following graphical alerts are used in this document to indicate notable situations:

NOTE Tips, hints, or special requirements that you should take note of.

CAUTION Care is required. Disregarding a caution can result in data loss

or equipment malfunction.

WARNING! Indicates a condition or procedure that could result in personal

injury or equipment damage.

AP 7181 Access Point: Installation Guide

2 Hardware Installation

An AP 7181 access point installation includes mounting the access point, connecting the

access point to the network, and applying power. Installation procedures vary for different

environments.

2.1 Precautions

Before installing an AP 7181 model access point verify the following:

• Become familiar with grounding requirements (see Grounding Requirements).

• Verify the environment has a continuous temperature range between -40° C to 55°

AP 7181 devices must be installed by trained professionals familiar with RF planning and

regulatory limits defined by the regulatory bodies of the country where the devices are

being deployed. All common precautions for grounding and ESD (Electrostatic Discharge)

protection should be observed during deployment and installation. AP 7181 devices are

designed to be installed outdoors and must be installed such that no harmful interference

results from device operation.

• Installations must be performed by professionals who are properly trained and

certified.

• Avoid contact with overhead power lines.

CAUTION All device wiring must comply with the National Electric code

(NEC) or regulations and procedures defined by the regulatory

bodies of the country or region where the devices are being

deployed. All local building and structure codes must be

observed.

WARNING! Strictly observe the following Safety Precautions during the AP

7181 Installation Procedure.

Hardware Installation 3

• Take precautions to avoid injury from falling tools and equipment. Crews should

wear hardhats in and around the installation work site.

• Be aware of vehicular traffic in and around the installation work site.

• Do not hold any component containing a radio such that the antenna is very close

to or touching any exposed parts of the body, especially the face or eyes, while

transmitting.

• Do not operate a portable transmitter near unshielded blasting caps or in an

environment where explosives are present unless the transmitter is especially

certified for such use.

2.2 Deployment Guidelines

Observe the following recommended guidelines to help ensure a successful network

deployment:

• Mounting height for network devices should not exceed 30 to 35 feet. Mounting

height should vary to accomodate the topography of the deployment area, foliage,

and other obstructions.

• Devices can be deployed using either the Bottom Mount Installation or the Top

Mount Installation procedure.

• Point-to-Point (PTP (Slave)) or Point-to-Multipoint (PMP (SM)) nodes providing

backhaul should be oriented to point away from AP 7181 antenna panels.

• Custom stand-off brackets should be used as required to provide adequate pole

separation in an an effort to minimize reflective received power.

• LoS guidelines should be given special consideration whenever devices will not be

installed in a straight line, such as deploying devices on alterating sides of a

roadway.

• Ensure that all Root nodes are deployed with line of site to the wireless backhaul

cluster points.

NOTE For more detailed deployment considerations for backhaul, refer

to the Mesh AP 7181 System Planner.

AP 7181 Access Point: Installation Guide

2.3 Installation Methodology

Consideration of the order in which units are installed when deploying an AP 7181 wireless

network can work to ensure a more stable and functional network. The PTP backhaul layer

should be deployed first. Next deploy all nodes for the PMP Access Point distribution layer.

Next deploy Root nodes along with PMP Subscriber Modules (SMs) such that backhaul

and network connectivity can be verified or corrected. Finally, deploy all Mesh Point

wireless nodes in order of the least to most hops (1 hop nodes first, followed by 2 hop nodes,

etc.).

2.4 Grounding Requirements

To avoid damage to the equipment, become familiar with Motorola Policy R56 before

installing AP 7181 units. Refer to Standards and Guidelines For Communication Sites,

Version B. Both the hardcopy manual (Part Number 68P81089E50-B) and the CD version

(Part Number 9880384V83) can be ordered from Motorola.

Section 7.6.4 Broadband - Wireless Access Point Network from the Standards and

Guidelines For Communication Sites applies directly to AP 7181 deployments:

SPD (Surge Protection Device) considerations for broadband shall include the use of SPDs

to protect pole-mounted access points and ground-based cabinet architecture. It is

important to install proper SPD applications on both ends of Ethernet, Power-Over

Ethernet (POE), Giga-Ethernet (GigE) and AC cable runs. SPDs shall be located within

the node or cabinet, or as close to the entrance as possible, and properly installed into load

centers, control panels and utility power cabinets. While RF protection is a consideration,

it shall only be required when antennas are connected to the node with coaxial cables

greater than 610 mm (2 ft.) in length.

When grounding a unit installed on a wooden pole, a ground conductor and rod is required.

This requirement should be factored into the project deployment costs, particularly if the

equipment must be installed by a utility company.

CAUTION It is required that all root and portal nodes be adequately

grounded. In addition, all root nodes and portals using the

Ethernet port or attached devices (e.g. a camera) must not only

be grounded, but they should also include surge suppression

for network reliability. This is particularly important for

network configurations with a public safety component.

Otros manuales para AP 7181

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Motorola

Motorola

Motorola AP-51 Series Manual de instalación y operación

Motorola

Motorola AP-5181 - Wireless Access Point Guía de referencia rápida

Motorola

Motorola AP-7131 Series Manual de usuario

Motorola

Motorola AP-650 Series Manual de usuario

Motorola

Motorola MotoWI4 PTP 600 Series Manual de usuario

Motorola

Motorola PTP 600 Series Manual de usuario

Motorola

Motorola AP 5131 - Wireless Access Point Manual de usuario

Motorola

Motorola MOTOMESH Duo 4300-49 Manual de usuario

Motorola

Motorola WA840G Manual de usuario

Motorola

Motorola AP-7131 Series Manual de instalación y operación

Motorola

Motorola PMP 100 Manual de instrucciones

Motorola

Motorola AP-7131 Series Manual de usuario

Motorola

Motorola 5440AP - Canopy 5.4 GHz AP Manual del propietario

Motorola

Motorola AP 7181 Manual de usuario

Motorola

Motorola CB3000 - Client Bridge - Wireless Access... Manual de usuario

Motorola

Motorola WA840GP Manual de usuario

Motorola

Motorola MOTOwi4 25600 Manual

Motorola

Motorola AP-7562 Manual de usuario

Motorola

Motorola WA840G Manual de instrucciones

Motorola

Motorola P-7131N-FGR Manual de instalación y operación

Motorola

Motorola AP-0622 Manual de usuario

Motorola

Motorola WA840G Instrucciones de funcionamiento

Motorola

Motorola WA840G Manual de usuario

Motorola

Motorola Verizon VAP2500 Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario